e640def4ffa689858c2441b82eff2334d1e1b93e
257
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Umut CANandClaude Opus 5.5
|
e640def4ff |
feat(understand): orthogonal lengths and pipe takeoff rows
route.py: Manhattan distance, the rectilinear minimum spanning tree (Prim over |dx| + |dy|, exact on the points given) and the x-then-y route. pipe_rows turns the P&ID's runs into rows by room x service x diameter. length_source auto measures on the P&ID only when the scale check calls it to scale; otherwise each run is the RMST of its tags' layout positions plus vertical_allowance per connection, with the drawn length kept beside it as schematic_m. length_source=pid on a schematic P&ID is refused with the statistics unless force=True. Status A / B / C; a C run goes to control with its schematic length, counted and flagged. Routed lengths are shared among the layout rooms their route crosses (track F's face finder); the allowance is its own column. Lengths are metres from the unit the geometry implies: a layout declaring inches over millimetres is read in mm and warned about, never multiplied by 25.4. The takeoff carries narrow stand-ins for the unit inference, the plan-copy clusters and the scale check (group U's modules are on another branch); a scale result passed in is used first. Tags written twice in the chosen cluster are ambiguous, never picked. Beyond the plan: the scale stand-in calls a non-positive median ratio insufficient (as group U's scale_check does) instead of to_scale with a factor of 0; an INSUNITS code the reader does not convert is named in the unit warning instead of being called "no unit"; wall layers are classified once per layer, not once per record. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
7bfba02ef0 |
fix(task-5): fittings bridge every port pair, reducers found however the pipe meets them, unread-layer lines keep their labels
- A three- or four-way fitting joined its ports as a star around the port seen first, so the diameter carried into an unlabelled branch depended on record order. Every port pair is now bridged; two sizes equally near stay unassigned whatever the order (six-order parametrised test). - A reducer was seen only through free ends in its box. It is now also found where pieces meet at a vertex inside its box (a line broken at the reducer) and where a straight segment is drawn through the middle of its box (cut at the foot of the box centre). A direct label holds for its entity only on its side of every reducer. - A diameter or direction label nearer to an open line on a layer that is not read belongs to that line: it is dropped and listed in stats.labels_skipped instead of landing on the nearest read pipe. Headless engine only: no new ActiveX call, so no live probe applies. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
1426c53fd3 |
feat(understand): the line-network engine - runs, services, diameters, equipment
build_network reads the segments of a foreign P&ID's piping and electrical layers into runs: ends merged within tol, a branch ending on a header split into a tee, a crossing without an end left unconnected, and a line drawn twice - or a line over a polyline - cut into identical pieces that are kept once, the doubled length reported as overlap_length. An INSERT holding two to four free ends is an inline fitting joined through; a reducer word in its block name (reducer, perekhod, reduksiyon, verloop, reduzier) stops diameter continuity. Each diameter label goes to the nearest piece and holds for its drawn entity (direct); unlabelled pieces take the nearest direct diameter along the run (continuity) or stay unassigned - two sizes equally near are never guessed. Labels stay as drawn. A supply or return word near a run overrides its layer's service for the whole run. Run ends attach to the tag whose labelled geometry holds them; a shape holding two tags (a room, a skid) is not equipment. Tests on hand-built drawings and on the synthetic plant pair. Beyond the plan: a CIP / glycol layer naming no direction (classify_layer files it `unknown` on purpose) now takes its direction from the word instead of staying unknown; is_reducer matches on vocab.fold and knows the German word equipment_kind already had; the fitting, equipment and attachment lookups go through grid indexes - measured 149 s -> 2.8 s on a 59,200-record synthetic drawing, results identical to the plan engine on it and on the plant pair. No ActiveX call is added (pure module). Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
704a44b190 |
test(understand): the synthetic plant pair - a schematic P&ID and its layout with known answers
Every track H reader is measured on this pair, never on a client drawing (spec section 14). tests/fixtures/plant_pair.py writes pid.dxf and layout.dxf with invented names and returns their truth, computed from the positions it placed: - the P&ID is room 1 of the layout stretched 1.3x and room 2 rearranged, so 21.8 % of the 55 tag pairs fall within 10 % of the median ratio (schematic) while room 1 alone is 100 % at 1.3; - service layers in English and Dutch, Russian supply / return words, one CIP return drawn on the supply layer, sizes spelled as drafters do (an MTEXT format run, %%c, \U+2205, the U+2300 sign, o-stroke, SMS, DN, 20x27), a reducer, inline valves, an arc bend, a segment drawn twice; - electrical texts in Russian with the power stated for all loads but one; - a layout declaring inches over millimetre geometry, a stray line 5,000 km out, two plan copies 100 m apart, wall outlines, room labels and wiring callouts in four spellings. Run lengths are the rectilinear MST of each run's tags, cable metres are the Manhattan length rounded up after the 20 % allowance; the generator refuses to write a pair whose own premises fail. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
9ab0ae1773 |
feat(understand): the snapshot, the vocabulary and the label parsers; MAX_DXF_BYTES 512 MB; the office extra
Track H's foundation, landed on main before its three groups branch. - engineering/understand/snapshot.py: one bulk read of a drawing into frozen WCS records (OCS translated through backends/ocs.py, text decoded, an INSERT boxed by its block geometry without its attribute texts). A DXF is read with ezdxf after the size check; the headless engine's document is read under its own lock; the live engine exports the active document with Document.Export(<tmp>/snap, "DXF", <set of all>) - never renamed, deleted afterwards - and a DWG is opened read-only, exported and closed. Measured on AutoCAD 2026: ".dxf" is refused with Invalid argument, the file lands as snap.DXF, model space, paper space and unused block definitions all reach it, and the selection set does not narrow a DXF export. - engineering/understand/labels.py: %%c, \U+2205, the U+2300 sign, o-stroke and MTEXT format runs all read as one diameter spelling; sizes are kept as drawn and never equated; Cyrillic look-alike capitals fold into Latin tags; panels, wiring callouts and electrical data (kW, phases, volts, N, VFD) in EN / TR / RU / NL / DE. A power that is not written stays None. - engineering/understand/vocab.py: layer classification with a confidence and the deciding keyword, supply / return words, room labels and block kinds in five languages. A CIP layer without a direction word is not guessed. - MAX_DXF_BYTES defaults to 512 MB (a real layout was 188 MB); the refusal names the size and the variable. New `office` extra (openpyxl), also in `full`; uv.lock regenerated. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
f0c50d772f |
docs(spec,plan): track H states what it does with xrefs
The spec promised that the first live task would measure xrefs. It never did: the plan measures model space, paper space and block definitions. 1.6 does not read an xref's own entities on either engine; the host drawing is what gets read. The snapshot docstring and drawing_understand's docstring now say so, and nothing is claimed about the live engine that was never measured. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
9b45243bdd |
docs(plan): track H task 11 reads units, plan copies, scale and rooms once
The reconcile pass left one real defect for the reviewer. Groups U and N are built side by side, so the takeoffs carry their own unit bands, cluster grid, scale statistic and room faces, and nothing ever retires them. Two readers of one drawing can disagree. On Task 6's own inches-over-millimetres layout, infer_units without room faces ties three ways and falls back to the header, while the takeoff's bands say mm. Task 11 gains Steps 15-20, committed on their own before the README figures are retaken: - describe.drawing_units becomes the one unit call, used by describe, scale_check and the takeoffs; - the takeoffs read plan copies, scale and rooms through group U's modules; - the stand-ins are deleted; - tests/test_understand_one_reading.py pins one unit, one plan copy, one verdict and one set of rooms per drawing. Tasks 3, 4 and 6 now point at those steps. Review Focus 1 names parse_diameters, the function every task uses. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
7f82766d38 |
docs(plan,spec): track H examples carry invented values only
A second pass compared every tag, number and literal in the plan with the field files, locally. Two borrowed values remained: a motor rating and one motor tag. Both are now invented (18,5 kW, M82), and the dependent sums and section rules were checked against them. The rest of the tank series was renumbered to keep its old sort order, since several assertions compare sorted tags: T4101-T4103, T4500 and T4600. Docstrings no longer tie example layer names to a particular drawing. The fixture's claim now says exactly what is invented (every tag and number) and what is ordinary drafting vocabulary (layer and block names). The spec's grounding paragraph now says "process plant" and no longer names the sector. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
77db39804a |
docs(plan): track H examples use synthetic equipment tags
The skeleton's examples (and the tests drafted from them) borrowed equipment tag numbers seen in the field drawings. They identify nothing on their own, but the plan's own rule is that every example and fixture is synthetic, so they are replaced by invented tags of the same shape and sort order (T41xx-T44xx, M41A, M47.1, M82, CP-M82), Cyrillic spellings included. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
023eac7a51 |
docs(plan): track H — 12 TDD tasks in three groups
The skeleton's header, constraints, file map and pinned interfaces now carry their twelve tasks, in order: - main (Tasks 1-2): the snapshot, vocabulary and label parsers, MAX_DXF_BYTES 512 MB and the office extra; the synthetic plant pair with its truth. - U (Tasks 3-4): drawing_understand and drawing_scale_check; SECTION 26 opens. - N (Tasks 5-8): the line network, orthogonal lengths and pipe rows, the takeoff workbook with pipe_takeoff, then cable_takeoff; SECTION 27, pack plant. - D (Tasks 9-10): drawing_diff and drawing_topology_check with the three topo_* focuses, on D's own copy of SECTION 26. - final (Tasks 11-12): packs, lean 65, aliases, golden queries and counts; benchmark v7, five correctness checks, the live smoke, the field-test script and the docs. Interface pass: the U and N texts now say what Task 6 really does with the scale check (it takes one through pipe_rows(scale=...) and otherwise keeps its own stand-ins), and Task 11 moves D's block above SECTION 27 after the merge. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
4cd5603725 |
docs(plan): track H skeleton — 12 tasks in three groups, interfaces and review focus pinned
Header, global constraints (confidentiality, read-only by default, nothing invented, inferred units), the five real-world inputs no happy-path test exercises (AutoCAD text codes, Cyrillic look-alike tags, repeated tags, double-drawn pipe, a layout whose INSUNITS lies), file structure, the interface block, execution with the worktree fast-forward rule, and the merge notes. Task sections are drafted next. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
18995bf854 |
docs: track H (understanding foreign drawings) design spec
Read a drawing somebody else made and turn it into a deliverable: a one-call drawing report (units that lie, stray extents, plan copies, multilingual layer meaning), a scale check between a P&ID and its layout, pipe and cable takeoffs whose topology comes from the P&ID and whose lengths come from the layout, a revision diff by geometric signature, and topology checks. Grounded in a real client project read locally (never committed): its P&ID proved to be unscaled against its layout, which no tool had flagged. Six tools (+ pack plant), three topo_* focuses, the office extra, a live DXF snapshot through Document.Export (measured: the document is not renamed), and synthetic fixtures that reproduce the field findings. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
0abbe55041 |
bench: matrix v6 adds arch_roundtrip; four architectural correctness checks; the live arch smoke
The evidence for track F, in the shape tracks A, E and B + G used. - benchmarks/tasks_v6.py: 19 tasks, DEFAULT_MATRIX = "v6"; v5 to v2 stay addressable. arch_roundtrip draws the example plan with arch_plan_from_spec and reads it back without the spec: rooms_detect must find each labelled room within 0.1 % of its label and of the net floor computed by hand (4825 x 5750 and 3825 x 5750), the schedules must list D1, D2, W1, W2, and the plan is gated on a zero-issue critique and a finalize score of at least 90. A test removes one room label and the gate fails naming arch_room_unlabelled. - Four correctness checks, every number worked out by hand in the docstring: L / T / X junction corners and wall areas, a 4 x 5 m room labelled 20.00 m2 rather than its 21.84 m2 axis area, a door interrupting both faces, and a plan of plain lines read as 20 and 15 m2 at confidence 0.6. The published A/B report is re-run over 43 checks: 26 / 43 -> 43 / 43, zero regressed. - scripts/smoke_arch_com.py runs the whole plan once on a live seat and closes every document it opens; the CHANGELOG records what it returned. - The token suite measures a TOOL_PACKS=core,arch row; check_doc_numbers derives the task count from the v6 matrix; CLAUDE.md, both READMEs and the spec status line say what shipped. - fix(com): the first live smoke exited 1 - the room reader found 0 wall segments. Measured on AutoCAD 2026 (2026-09-23): with a makepy cache, ModelSpace.Item(i) returns the gen_py IAcadEntity wrapper (type(item).__name__ == "IAcadEntity") and item.StartPoint on an AcDbLine raises AttributeError, so every entity_list row lost its type-specific properties (28 wall LINEs, 0 with start/end). _entity_info now re-dispatches exactly that wrapper through _com_unnarrow; after the fix 38 of 53 rows carry start/end and the smoke exits 0 with both rooms at 27 743 750 / 21 993 750 mm2 and 0 critique issues. Re-dispatch measured at ~1.7 ms per entity (dynamic vs gencache alike). Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
6e004cc658 |
feat(arch): arch_plan_from_spec, three arch_* critique focuses, the arch pack, lean 64 and the counts
The three track-F branches are merged; this is the integration that makes the
twelve SECTION 25 tools one surface.
- engineering/arch/spec.py: a whole plan from one document - walls with their
openings, stairs, room labels measured off the walls just drawn, the
exterior chains and the schedules - inside one transaction. Everything the
model, the wall engine or the stair symbol can refuse is refused before the
transaction opens, by path; a room point in no closed face rolls it back,
and so does a cancelled request, under the anyio shield of pid/spec.py.
EXAMPLE_SPEC's rooms measure 4825 x 5750 and 3825 x 5750 - the net floor,
computed by hand in the tests.
- engineering/arch/critique.py: arch_room_unlabelled, arch_wall_gap (50 mm,
one issue per pair of walls, measured to the wall body so an L corner and a
T stem both read as joined) and arch_opening_clash. One index per critique
run; a drawing without an ACADMCP_ARCH record yields nothing. Each focus
has a positive and a negative fixture.
- TOOL_PACK_NAMES gains "arch" (the twelve SECTION 25 tools); lean gains
arch_wall, arch_opening, arch_room and arch_plan_from_spec and reaches 64;
the arch tag ranks after mech, so SECTION 25 files as one `architecture`
group - 241 tools in 26 groups.
- Six golden tuning cases, two of them Turkish, the arch_plan_from_spec alias
record, the shared-command allowlist reconciled with what the merged records
claim, the inventory regenerated, the registry snapshot retaken, and the
README figures taken from check_doc_numbers rather than typed.
- Two more Turkish golden cases close the reconciliation's alias gaps
("vaziyet planı çiz" -> arch_plan_from_spec, "oda alanlarını hesapla" ->
arch_rooms_detect); the arch records carry vaziyet / alan / oda / kat planı
in diacritic and ASCII-folded spellings, because the search tokenizer splits
on a non-ASCII letter. BOUNDARY and AREA stay with boundary_trace and
analysis_measure_entity on purpose, recorded in the arch alias comment.
Tuning top-1 73/84, top-3 83/84; holdout top-3 15/15.
- tests/test_token_suite.py: TOOL_PACKS=core,mech now drops the arch pack
too (measured 193 = 236 - 9 - 22 - 12).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5.5
|
ad5a32a34a |
merge: reconcile counts after track F groups
The walls branch pinned the architecture group to its own four tools; after the merge SECTION 25 files eleven there, so the test checks the four are among them. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
4c5c8227ef |
merge: track F group C
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
18db0b46c0 |
merge: track F group R
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
4c91d3da92 |
merge: track F group W
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
cd1ae3529c |
feat(arch): SECTION 25 opens - walls, openings, stairs and exterior chains as tools
engineering/arch/draw.py is the only module of the track that touches a backend. It draws through draw_prims(role_layer=ARCH_ROLE_LAYER) and the generic contract members, so it runs on both engines as written, and it writes the plan onto the drawing: each element's ACADMCP_ARCH record on one of its own entities (a wall's first face line, a door's leaf, a window's frame, a stair's first riser) and, beside it under ACADMCP_ARCH_H, the handles that element owns. read_plan reads the records back and never modifies the drawing. arch_wall computes the whole network before and after the new walls and redraws only the drawn walls whose outline changes - erasing exactly the entities they own - and says which under redrawn. arch_opening hosts a door or a window in a drawn wall found by id and redraws that wall cut; its tag defaults to the next D1/W1 (K1/P1 in Turkish). A new wall that would leave a drawn opening uncuttable, and an opening that runs into a junction, are refused before anything is erased. arch_stair reports the Blondel value; it does not enforce it. exterior_chains gives each side up to three rows, nearest first: every jamb in that facade, both faces of every wall meeting it, and the overall - from the wall engine's own faces. A row that would only restate a farther one is not emitted (ISO 129-1: each measurement once). The 10 mm / 8 mm row spacing is a declared drafting default times the plot scale, not a standard value. The arch tag is ranked after mech so the four tools file under a new architecture group; alias records carry WALLADD/MLINE, DOORADD/WINDOWADD and STAIRADD with English and Turkish shop words. Inventory regenerated; README snapshot 233 tools (228 advertised) in 26 groups; registry snapshot architecture: 4. No new ActiveX member is called. Measured on AutoCAD 2026 in a scratch document through ComBackend: shell + teed partition, D1 + W1, a straight 17-riser stair and the bottom chains gave the same 20 wall LINEs (identical endpoints), 9 poche HATCHes, 1+1 door, 4 window lines, 11 dimensions and a read_plan round trip as the headless engine. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
9168d61397 |
feat(task-6): door, window and room schedules read from the drawing
engineering/arch/schedule.py turns the plan records into schedule rows: doors by tag with width, height, swing, hand and wall; windows by tag with width, height, sill and wall; rooms by number with name and the measured area the label carries, plus a total. Tags compare as numbers (D2 before D10). An opening without a tag gets the next free D1 / W1 - K1 / P1 in Turkish - in wall order; an explicit tag is never renumbered and a generated one never repeats it. A value the model does not carry is an empty cell, never a default, and Turkish output writes decimal commas. draw_schedule reads the ACADMCP_ARCH records off the drawing through the one reader rooms.py already has and draws a real TABLE the way the ISO 7573 parts list does - top-left insertion, the table growing down, the parts list's 7 mm rows and 2.5 mm text at the plot scale, the engine's representation reported. Nothing to schedule, an unknown kind or language and more rows than one TABLE takes are refused before anything is drawn. arch_schedule joins arch_room and arch_rooms_detect under SECTION 25's rooms marker (banner 3 tools), shares the TABLE command with entity_create_table and bom_table, and the counts follow: 232 tools in 25 groups. Live fix in com_backend.entity_create_table. MEASURED on AutoCAD 2026: IAcadTable has no TextHeight property. pywin32 raised AttributeError on `table.TextHeight = h`, the old code swallowed it, and every live table kept the Standard style's heights (title 6.0, header and data 4.5), which is 0.1 mm on paper at 1:50. The member that works is SetCellTextHeight(row, col, h), probed on a scratch document: every cell read back 125.0 via GetCellTextHeight. The row heights stayed 350.0 and GetBoundingBox matched the reported bbox (10000,3250)-(15750,5000). Then draw_schedule ran end to end through ComBackend on a scratch document: a native TABLE on A-SYMB-T-N for doors (5 rows) and rooms/tr (6 rows, total 45,00 m²), and the document was closed afterwards. The new fake in tests/test_table_leader.py has only the measured members. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
b68fe7ef66 |
feat(arch): door and window symbols, straight/L/U stairs and the Blondel check
openings.py draws what stands in the gap the wall engine cuts, from the same numbers - the wall axis, its face offsets and model.segment_of - so the symbol cannot drift off its gap. A door is drawn open at 90 degrees: its leaf as long as the opening is wide, square to the wall from the hinge on the swing-side face, and a quarter arc from the closed position to the open one. swing=in is the left of the axis (the inside of a CCW perimeter); hand names the hinge jamb seen from the swing side facing the wall. All four swing/hand pairs are tested against hand-computed hinges and arc angles. A window is a frame line on each face and two glazing lines at the thirds of the thickness. stairs.py draws every riser once as a line across its flight, the outline, a walking line up the middle with an open arrow at the top, and the language's 'up' word on the first tread at 2.5 mm times the plot scale. An L or a U turns on a square landing; its first flight carries (risers + 1) // 2 risers. The riser count and every dimension are refused by name before any geometry. blondel() reports 2R + G against 600-650 mm - the step-length rule attributed to Francois Blondel (1675), reported as a design rule and never as a building code: no national stair regulation is checked. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
a2996b0c95 |
fix(task-5): skip what the room reader cannot read, and one face carries one room
read_segments trusted any row with `points`. On a live seat an old-style AcDb2dPolyline's Coordinates are x, y, z triples (measured on AutoCAD 2026, 2026-09-23: [200,200,0, 4200,200,0, ...]) which the backend reads two at a time, so three closed ms.AddPolyline outlines on WALLS reported points like [[0,0],[0,8600],[0,0],[8600,5400],...] and rooms_detect answered five faces of 2.6-6.9 m2 for two 20 m2 rooms. Headless, the same POLYLINE arrives with no points and was dropped without a word; so were walls inside a block reference. The reader now reads LINE and the lightweight polyline only (LWPOLYLINE, and the live AcDbPolyline reported POLYLINE), and lists every other entity that could bound a room in `skipped` with its handle, type and reason: arcs and bulged edges as before, old-style polylines (2DPOLYLINE/3DPOLYLINE live, a vertex-less POLYLINE headless), block references (INSERT / BLOCKREFERENCE) and anything else not a line. Text, dimensions, leaders, points and hatches bound nothing and are passed over. Re-run live on AutoCAD 2026 through the real com_backend._entity_info rows: count 0 with the three polylines in skipped (was 5 wrong rooms); with a lightweight pair and a block added, count 1 at 20 000 000 mm2 plus the block reference in skipped. The backend's stride is left alone (shared file, other readers); this reader no longer trusts it. label_room refused a reused id but not a reused face: a second label in a labelled room (a retry after a transport timeout) wrote a second record with the same area, which a schedule total counts twice. It is now refused before anything is drawn, naming the record and label already there. rooms_detect reports `labels` (every record in the face; `label` stays the first) and `label_conflicts` for a face holding more than one. No new ActiveX member is called. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
9e9138f22d |
fix(task-2): order-independent T cuts and bounded near-straight joins
A T recorded its cut on the crossing segment as a distance from that segment's start; when the start was carried onto a third wall later in the same pass the cut went stale, so [c,b,a] drew a free-end jamb inside wall a, an uncut face and a double-hatched overlap where [c,a,b] was right. Cuts are now stored as points and measured against the final axis. A near-straight join whose faces are offset (a thickness or justification change, or a rounding kink between such walls) mitred at offset/sin(kink): faces 1e8 mm long and a clockwise region for a 0.01 mm rounding. A straight-through pair whose mitre lies more than _MITRE_REACH (2) thicknesses from the node now steps on the line bisecting the join - both sides of a two-end node together, so the pieces tile without a sliver - and every piece and hub ring is refused unless counter-clockwise, not only when it crosses itself. Pure geometry: no ActiveX member is touched, so no live probe applies. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
f5f11178a9 |
feat(task-8): SECTION 25 grid and symbols - arch_grid, arch_symbol
engineering/arch/symbols.py is pure: grid_prims() draws each structural axis on the grid role - its CENTER linetype comes from the A-GRID-E-N row, no primitive sets one - with a 5 mm (paper) bubble and its label touching both ends, on the symbol role so the circle does not print dashed. Numbers run along x and letters along y (A..Z, AA, ... none skipped) unless labels names them; positions are sorted, duplicates and label-count mismatches refused by path. symbol_prims() draws the four plan symbols: the north arrow (a circle, an arrow turned CCW from +Y, the vocab(lang) north letter upright beyond the tip), the section mark (the cut line, a labelled bubble past each end and a viewing arrow at each end, p1/p2 relative to the origin), the level mark (the triangle, its line and the value formatted +3.00 / ±0.00, with a decimal comma in Turkish) and the elevation mark (a circle whose pointers are the tangents from r*sqrt(2) touching it at +/-45 degrees). An unknown kind is refused with the list, a parameter the kind does not take with the ones it does. Every size is a declared paper-mm drafting choice times the plot scale, not a standards value. arch_grid and arch_symbol draw through draw_prims with ARCH_ROLE_LAYER; alias records (COLUMNGRIDADD, English and Turkish synonyms), a regenerated inventory, the README snapshot at 233 tools and the branch-local group snapshot (entity_creation 21) complete the registration. Beyond the plan: grid_axes refuses a labels value that is not a dict and a labels.x / labels.y that is not a list (a string was split into one label per character, a number raised a bare TypeError). No new ActiveX member: a live run on AutoCAD 2026 (scratch document, closed after) drew the grid and all four symbols through draw_prims - A-GRID-E-N created with CENTER, bubbles, texts and symbols on A-SYMB-T-N, the Turkish north letter K and the level "+3,00". Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
afd42356b5 |
feat(task-7): SECTION 25 catalogue - arch_catalogue_list, arch_catalogue_insert
engineering/arch/catalogue.py is the standard-parts pattern of track B for an architectural plan: twenty authored plan symbols in two families - thirteen furniture items (single and double bed, wardrobe, three-seat sofa, armchair, chair, dining table with four chairs, desk, kitchen counter run, fridge, bookshelf, nightstand, coffee table) and seven sanitary items (WC, bidet, wall basin, shower tray, bathtub, kitchen sink, washing machine). Every size is a nominal catalogue dimension and says so in SIZE_BASIS, in each row and in both tool docstrings; no standard is cited because none fixes these sizes. Each item is typed block_define primitives on layer 0 inside [0, w] x [0, d], origin at the back-left corner with the wall side along +X - a test holds all twenty to their footprint. catalogue() searches name, family and the English and Turkish labels, ignoring case and Turkish diacritics (buzdolabi finds buzdolabı). insert_item() defines ARCH_<NAME> once, creates the furniture or sanitary layer from its ARCH_LAYERS row when missing (live ActiveX refuses a missing layer), inserts with an invisible ITEM attribute, and refuses an unknown name with the nearest catalogue names before any write. SECTION 25 opens on this branch with the two tools, alias records (INSERT, ADCENTER, TOOLPALETTES and English/Turkish synonyms), a regenerated inventory, the README snapshot at 231 tools, and the branch-local group snapshot (entity_query 10, entity_creation 19) that the track F merge recomputes. No new ActiveX call: insert_item composes the existing layer_list, layer_create, block_list, block_define and block_insert members. Run once live through ComBackend on AutoCAD 2026 (scratch document, closed after): all twenty items defined and inserted, a second double_bed insert reported defined=false, ITEM read back as double_bed, 20 ARCH_* blocks, 21 INSERTs on A-FURN-E-N / A-SANR-E-N, both layers created at ACI 5 / 0.18 mm. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
67d578e09a |
feat(task-5): planar faces, measured room labels and the foreign-plan reader
engineering/arch/faces.py finds the closed faces a set of straight segments bounds: endpoints within tol merge, every segment splits where another crosses or touches it (the T-junction a partition makes), dangling edges are pruned, and the half-edge walk turns to the next edge clockwise so every bounded face comes out counter-clockwise. A piece nested inside a face of another piece is a hole in it, so a ring of walls measures its body and a room with a column measures its floor. Areas come from engineering.measure.polygon_area_perimeter, the arithmetic analysis_measure_entity reports. engineering/arch/rooms.py labels a room with the area of the face its point lies in - a 4000 x 5000 room between 200 mm walls reads 20.00 m2, never the axis area - and writes the room record onto the name text. Opening records close door and window gaps along the wall faces, so two rooms either side of a door stay two rooms. rooms_detect reads any plan's lines, drops faces under min_area and thin wall bodies (mean width under 600 mm, a declared heuristic), reports confidence 1.0 for faces enclosed only by our wall layer and 0.6 otherwise, lists arcs as skipped rather than flattening them, and never modifies the drawing. Two hardenings beyond the plan text, each with a test: read_records pages the current space once and filters to the arch layers locally (the plan paged it once per arch layer - twelve full scans, each a cross-process call per entity on a live seat), keeping the same layer-then-drawing order; and an opening record whose offset falls outside its wall (a stale record) is listed in omitted instead of raising out of the read-only detector. No new ActiveX member is called: both tools compose entity_list, entity_get/set_xdata, layer_list and draw_prims, whose COM paths are already live-verified. SECTION 25 opens on this branch with arch_room and arch_rooms_detect under the rooms marker; until Task 9 gives arch its group they file under entity_creation and entity_query. Alias records, a regenerated inventory, the README snapshot at 231 tools in 25 groups and the frozen group-size snapshot follow. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
dae48d9037 |
feat(arch): the wall engine - L/T/X junctions, opening gaps and material poche
engineering/arch/walls.py turns a wall network - axis polylines with a thickness, a justification and a material - into clean outlines. One rule resolves every junction: at each node the segment ends are sorted by angle and the left face of each meets the right face of the next one counter-clockwise. That mitres an L, stops a T's stem on the crossing wall's near face (cut there, while the far face stays one line) and cuts all four faces of an X. A T is an axis end lying inside another wall: it is carried onto the crossing axis and the crossing segment is split. The hub a three- or four-way node leaves is a region of its own, so the poche has no hole. Openings remove their width from both faces and are closed by jambs; a free end is closed by a jamb. Each solid piece is one CCW region and one HatchArea in the wall's material. The two face lines across each opening are kept as thresholds - never drawn - so room_segments hands the face finder closed rooms instead of rooms merged through their doorways. Refused by name before any geometry: a duplicate id, an unknown material or justification, a zero-length segment, a junction below 5 degrees, a corner inside another wall off its axis, an end whose axis meets the other wall past its end, a segment lying wholly inside the wall it joins, and one too short for its junctions (engineering.measure.is_self_intersecting on its outline). An opening that runs into a junction is returned in omitted, never dropped. Every corner in the tests is hand-computed: two 200 mm walls at the origin meet at (100, 100) inside and (-100, -100) outside. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
d5c5e90406 |
feat(arch): the plan model and its foundation - layers, materials, EN/TR, two generalisations
Track F starts here; the three group branches are cut from this commit. - engineering/arch/model.py: Wall, Opening, Stair and Room as frozen dataclasses, and every refusal of spec 4 before anything is drawn, by path (walls[2].thickness): finite positive numbers, an axis of at least two distinct points with no zero-length segment, an arc segment refused by name rather than approximated, an opening on an unknown wall, past its wall, across an axis vertex or overlapping another (both ids named), an unknown material, and a typed room area - areas are measured, never typed. The plan travels as ACADMCP_ARCH XDATA; an opening's door/window kind and a stair's straight/l/u kind ride beside the payload kind as opening_kind / stair_kind, because one key cannot hold both. - engineering/arch/layers.py: the arch set - thirteen ISO 13567-style layers with ISO 128 lineweights only (0.05 mm on the construction scratch layer, as every set in this repository) - and ARCH_ROLE_LAYER, the one place a role becomes a layer. Registered in engineering/layers.py last, which is what keeps the engineering.layers <-> engineering.arch import cycle closed. - engineering/arch/materials.py: eight wall materials, one pattern each, every row citing its source: ANSI31 for brick (ISO 128-50 general hatching, acadiso.pat's own "Iron, Brick, Stone masonry"), AAC as ANSI31 at twice the spacing (a repository convention, and it says so), AR-CONC / AR-SAND as AutoCAD patterns, and the JIS A 0150 RC / stone / wood symbols. Reinforced concrete cannot be ANSI31 and AR-CONC in one HATCH, so it takes the one symbol that names it. Periods on a 1:50 sheet are recomputed from ezdxf's own pattern definitions by the tests. normalise_material is the one reading of a material name, shared by the model and wall_hatch, so the model never refuses "Reinforced Concrete" that the hatch table resolves. - engineering/arch/lang.py: EN / TR vocabulary, D/W and K/P tag prefixes, and the decimal comma for lang="tr" (24,50 m2). - draw_prims(role_layer=) and the XDATA codec's app_id= / kinds=: both generalised with the mechanical defaults, and the mechanical suite passes unchanged against them - that is the regression gate. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
b012fdf1be |
docs(plan): track F — 10 TDD tasks in three groups
Task 1 (main) lays the foundation every group branches from: the arch layer set and role map, wall materials, EN/TR vocabulary, the plan model with its ACADMCP_ARCH payload (opening_kind / stair_kind beside the record kind), draw_prims(role_layer=) and the codec's app_id= / kinds=. - Group W (Tasks 2-4): the wall engine (L/T/X junctions, opening cuts, poche), doors, windows and stairs, the async layer with read_plan and the exterior chains; SECTION 25 opens with four tools. - Group R (Tasks 5-6): the planar-face finder, measured room labels, the foreign-plan reader and the door/window/room schedules; three tools. - Group C (Tasks 7-8): the furniture and sanitary catalogue, the grid and the plan symbols; four tools. - Final (Tasks 9-10, main after the W -> R -> C merge): arch_plan_from_spec, the three arch_* critique focuses, the arch pack and lean 64, then the v6 matrix with arch_roundtrip, four correctness checks, the live smoke and the docs. Consistency pass: group W's poche now goes through draw_prims with the arch role map (Task 1 resolves wall materials there), and the hedges on Task 1's payload spelling and Task 5's rooms_detect shape are replaced by the shapes those tasks pin. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
3248bfbfea |
docs(plan): track F skeleton — 10 tasks in three groups, interfaces pinned
Header, global constraints, file structure, the interface block every task builds against, the group/ownership table, the SECTION 25 banner protocol and the merge notes. Task sections are drafted next. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
83f192ac2f |
docs: track F (architectural 2D) design spec — the plan model
One plan model — a wall network with hosted openings — and one engine that resolves L/T/X junctions, cuts openings, hatches cut walls by material and computes rooms as the faces the walls enclose, so areas are measured, never typed. A pure planar-face finder reads rooms from foreign plans on both engines (the live engine has no boundary_trace). Furniture/sanitary catalogue, grid, symbols, exterior dimension chains, schedules from the model. 12 tools (SECTION 25, pack arch), English by default with lang="tr", poché by material, three arch_* critique focuses, benchmark arch_roundtrip. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
2bba18d0f7 |
fix(com): hatch islands on a live seat — typed edges become temporary entities
hatch_add_boundary was refused on COM (hatch_edge_paths), so a transverse section of any hollow part — a bushing, a flange bore — could not be drawn in AutoCAD at all: draw_prims asked the capability map and refused up front. ActiveX takes a loop as whole objects, which is not the same as "cannot take a typed edge": each edge now becomes a real temporary LINE, true ARC or ELLIPSE in the hatch's own space, appended with AppendInnerLoop, evaluated and deleted. A loop that is only chained lines becomes one closed polyline — one COM call instead of 180 for a flattened bore. The edge list is validated in full first with the headless engine's messages; a loop AutoCAD refuses is taken back out with its temporaries. Measured on AutoCAD 2026 (25.1s), in scratch documents closed unsaved: - a two-arc island leaves exactly 10000 - 100*pi (9685.8407) of a 100 x 100 hatch; - the OD40/ID20 sleeve's transverse section B-B, drawn through the view engine and draw_prims, hatches 942.2864 mm2 — the engine's declared 180-gon; - an open chain is refused (E_FAIL) and the entity count is unchanged. hatch_edge_paths is now supported on both engines. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
e6f685643d |
fix(com): a DXF type filter finds what ActiveX names differently
block_find_references asks entity_list(type_filter="INSERT"), and ActiveX calls a block reference AcDbBlockReference, so on a live seat the filter matched nothing and every block reported zero references. Measured on AutoCAD 2026 (25.1s): AcDbBlockReference, AcDbPolyline, and one class per dimension kind (AcDbRotatedDimension, AcDbAlignedDimension, AcDbDiametricDimension, AcDbRadialDimension, AcDb2LineAngularDimension, AcDbOrdinateDimension). entity_list and entity_count now let the DXF name find them: INSERT matches BLOCKREFERENCE/MINSERTBLOCK, LWPOLYLINE matches POLYLINE, and DIMENSION every *DIMENSION class. The reported type stays the ActiveX spelling, so a caller already filtering by it is unaffected. Verified live in a scratch document: two inserts, one dimension and one line are found by INSERT, DIMENSION and LINE (the INSERT filter found 0 before). Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
898e775f93 |
bench: matrix v5 adds mech_assembly; the correctness suite grows with the mechanical and sheet checks
The evidence for tracks B and G, in the shape tracks A and E used.
- benchmarks/tasks_v5.py: 18 tasks, DEFAULT_MATRIX = "v5"; v4, v3 and v2 stay
addressable so an earlier report reproduces exactly rather than being only
described. mech_assembly is roadmap criterion 3 - a flange-coupling sheet
built from the part model and the sheet standard, through the code the
tools call (apply_titleblock, draw_part/add_view/dimension_part,
insert_std_part, extract_records -> draw_bom_table, add_balloon), gated on
two numbers that cannot be negotiated: drawing_critique(focus=None) returns
zero issues and the finalize score is at least 90 (it scores 100, 18/18 on
the v5 matrix). The adapter returns the focuses that fired, so a
regression names itself, and a test drops one balloon to prove the gate
fails and names mech_bom_balloon_mismatch.
- Seven correctness checks (32 -> 39). mech_section_hatch_area is the one
that cannot be faked: a sleeve of length 60, outside diameter 40 and bore
20 cuts two faces totalling 1200 mm^2 exactly, read back out of the drawing
through entity_measure. sheet_frame_iso5457_a3 pins the A3 frame (20,10 to
410,287 inside the 420 x 297 trimmed sheet); mech_iso286_on_dimension pins
40 H7 at +0.025/0 through the layout; std_part_iso4014_m12 pins s = 18 and
k = 7.5 by value; mech_thread_unrepresented_is_caught is the seventh: a
quality gate that never fires is not a gate.
- scripts/smoke_mech_com.py executed every new COM path once on AutoCAD 2026
(25.1s): frame, title block, a sectioned shaft with 12 dimensions, an ISO
4014 block with 1 ACADMCP_MECH chunk, a weld symbol, the parts list read off
the drawing, a linked balloon, an xref attached / listed / detached, a
31687-byte .dwg (AC1032) through ActiveX SaveAs, critique 0 issues, exit 0,
every scratch document closed. It retries RPC_E_CALL_REJECTED (measured:
the first call after Documents.Add is refused) and tracks its documents by
the document list, since SaveAs renames them.
- Defects the evidence found, each fixed with a test that fails on the old
code:
* ezdxf dimension_diameter put the text beyond the SECOND chord point;
ActiveX AddDimDiametric puts it beyond the first (measured live: a d50
from (x,170) to (x,220), leader 10, text at (x,160)). Headlessly every
front-view diameter stood on its own chain dimension. ezdxf now follows
ActiveX.
* draw_part's anchor goes on MECH; ActiveX refuses entity.Layer on a
missing layer (measured -0x7ffdfff7 'Key not found'). draw.py ensures
every target layer before the first entity.
* bom.extract_records filtered on INSERT; ActiveX names it BLOCKREFERENCE
(ObjectName AcDbBlockReference) - the live parts list was empty.
* COM _entity_info reported no dimension text_position: ModelSpace.Item
narrows to IAcadEntity, which has no TextPosition (measured
AttributeError); read through _com_unnarrow (TextPosition measured on
AcDbDiametricDimension, WCS). dim_overlap compared bbox centres and a
diameter collided with its own bore.
* pid graph raised KeyError 'start' mid-critique on a LINE whose point read
AutoCAD refused while busy; such a line is left out.
* the validator read "ISO 4014 - M12x60" as fake dimension text.
- The published A/B report is re-run over the grown suite rather than
re-typed (26/39 -> 39/39, 13 fixed, 0 regressed), check_doc_numbers derives
the task count from the v5 matrix, the token table is remeasured with a
TOOL_PACKS=core,mech row (193 tools / 61,673 tokens), and the README's
collected-tests figure is retaken (3990).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5.5
|
3b033033f9 |
feat(mech): six mech_* critique focuses, the mech pack, lean 60, aliases and the counts
The four track-B/G branches are merged; this is the integration that makes the 25 new tools one surface instead of four. - engineering/mech/critique.py: the six focuses of spec 13, dispatched the way the P&ID ones are. One index per critique run, shared through run_critique's context, so six focuses cost one read of the drawing; a drawing with no ACADMCP_MECH payload yields nothing at all, which is what keeps focus=None cheap for a P&ID sheet or a plain DXF. Each focus has a positive and a negative fixture. Two narrowings are in the module docstring rather than hidden: mech_view_misaligned checks the projection axis and not the quadrant, because the pinned payload carries no projection angle to check it against, and mech_duplicate_dimension catches two dimensions in the same place rather than a semantic restatement, because no engine exposes what a dimension measured. - The index reads what the tools actually write, not only the plan's fixture shape. mech_part_draw anchors its part payload on a POINT (layer MECH) and lists every drawn view under "views"; the plan's index read INSERT/CIRCLE only and one "view" per payload, so it was silent on every part the server draws. It now reads POINT too, expands "views" into one entry per drawn view (the section check looks in the section's own WCS box, the alignment check compares frame_bbox centres), and pages entity_list instead of one call. Test: a part drawn by draw_part + add_view is read and passes all six; the same part with its hatch erased is reported. - Live type names, measured on AutoCAD 2026 (2026-09-23, scratch document, closed): ObjectName AcDbBlockReference -> BLOCKREFERENCE, AcDbRotatedDimension -> ROTATEDDIMENSION, AcDbAlignedDimension -> ALIGNEDDIMENSION, AcDbPoint -> POINT with GetBoundingBox = the point. The index reads BLOCKREFERENCE as an INSERT and any *DIMENSION as a dimension; a wrapper test reports the ezdxf entities under exactly those measured names. - mech_thread_unrepresented uses the view engine's own MINOR_RATIO, and checks the thin line ISO 6410 draws: the minor diameter of an external thread, the major of an internal one. - mech_bom_balloon_mismatch: identical parts share one balloon (ISO 6433 balloons a parts-list row), so a second M12x60 is covered by the first one's balloon instead of reported. - TOOL_PACK_NAMES has "mech" (the 14 tools of SECTIONS 21-23). SECTION 24 stays core: a frame, a title block, a parts list and an xref are universal drafting, not a vertical. Lean gains five and reaches 60 (54 with TOOL_PACKS=core). - _GROUP_TAG_PRIORITY gains sheet directly after mech; the mech group label becomes "mechanical". SECTION 24's last four tools (xref_attach, xref_manage, image_attach, drawing_export_dwg) now carry the sheet tag, so group, pack and SECTION are one list: 229 tools in 25 groups, and engineering/blocks/entity_creation/drawing return to their pre-SECTION-24 sizes. - Ten golden tuning cases, two of them Turkish (with the diacritic spellings added to the alias records next to the ASCII-folded ones). The shared AutoCAD command set needed no change: the merge had already resolved TABLE, REVCLOUD, SECTIONPLANE, INSERT, ARRAY and SAVEAS, and nothing is stale. - Inventory regenerated, the frozen group-size snapshot retaken from the live registry, and the README release-snapshot / pack / lean figures taken from scripts/check_doc_numbers.py rather than typed. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
a6c9c0d927 |
merge: tracks B+G group G
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
76e8647e1b |
merge: tracks B+G group A
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
36dab4cec6 |
merge: tracks B+G group S
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
5b70533505 |
merge: tracks B+G group M
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
5388440c27 |
fix(task-7): rotation honoured end to end, each view dimensioned once, refusals that name their path
- rotation turns the whole sheet of views about `at` as one rigid body: the
prims, the recorded WCS `bbox` (plus the sheet-frame `frame_bbox` the next
view is laid out against), the detail marker, and every dimension intent
(points, text position, and the linear measuring direction + rotation).
Measured headless: rotation=90 at (100,100) now draws (70,100)-(100,172),
records exactly that box, and leaves only the 2 diameter chord defpoints
off-geometry (was 4, up to 47.5 mm away).
- dimension_part dimensions only views whose record is not `dimensioned`,
takes `views=[indices]`, refuses a view already dimensioned by name
(ISO 129-1), writes the flag back, places the hole table once, and refuses
a fit no target view claims before drawing anything. A view the dimension
layer emits nothing for (a detail) is reported in `skipped` and left
unflagged. mech_dimension_part gains the `views` argument.
- draw_prims checks hatch_add_boundary's {"ok": False}: the hatch is removed
and the failure raised, never left solid through the bore. An engine whose
capability map says `hatch_edge_paths` is unsupported (the live one) is
refused before any prim of the view is drawn.
- a view scale other than 1.0 is refused by name in draw_part and add_view
(views are drawn full size; the scale would only have been recorded).
- add_view's collision step compares real rectangles on both axes and steps
along the projection axis layout_origin chose, so a third-angle view is
never shoved back onto the front view and a top view keeps its alignment.
- draw_from_spec validates `at` / `rotation` into the `parts[i]:` path and a
transaction that cannot open is a ValueError (a ToolError at the tool).
No new ActiveX member is called: the change composes existing contract
members (dimension_linear rotation, entity_delete, capabilities()).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
301610620c |
fix(task-14): detach an xref out of every space, and stop the live engine inventing facts
Three blocking findings on the refs group, all of them the same shape: a number or a refusal the caller was entitled to read as measured. 1. ezdxf xref_manage: the victim scan and the `inserts` count both walked `doc.modelspace()` only, then dropped the definition with `delete_block(safe=False)` -- the flag that suppresses the in-use check. An xref shown on a paper-space sheet was reported as 1 insert where the drawing held 2, and detaching it left that sheet INSERT with no BLOCK behind it: `ezdxf.recover` reports `FIX 103 UNDEFINED_BLOCK: Deleted entity INSERT(#34) without required BLOCK definition` and the repo's own drawing_audit silently deletes the sheet geometry. The scan now walks `doc.blocks`, which is every entity space (model space, each paper-space tab, every block definition) and is exactly what ezdxf's own safe check searches with `doc.query('INSERT[name==...]i')` -- hence the case-insensitive name match. `delete_block` is now `safe=True`, as the plan's Interfaces block pins it, so a future miss raises instead of writing a corrupt file. 2. COM xref_manage(action='list') reported `kind: "attach"` for every row, a literal constant. Re-measured on this seat's registered type library (C:\Program Files\Common Files\Autodesk Shared\acax25*.tlb, "AutoCAD 2025 Type Library", installed with AutoCAD 2026): IAcadBlock's xref members are exactly IsXRef, Path, Name, Reload, Unload, Bind, Detach, XRefDatabase -- no overlay indicator exists on the interface, so an overlay was reported to the client as an attachment. The row now says `kind: None`, the same honesty the adjacent `inserts` field already had, and the contract plus the tool docstring say so. 3. COM xref_attach had no duplicate-block-name guard, although contracts/refs.py and the tool docstring both promise the refusal and ezdxf implements it. Two different part.dwg files, or a re-attach after a repath, silently re-pointed or half-wrote the definition while the payload claimed the new path. Added `_block_names(doc)` (Blocks.Count / Blocks.Item(index) / block.Name -- the members xref_manage already walks) and the refusal fires before AttachExternalReference is dispatched, with the same message the headless engine gives. Lower-cased, because AutoCAD symbol-table names are case-insensitive. Tests: five new ones, each failing against the unfixed backends -- an xref shown on Layout1 is counted and detached with the drawing, the detached file audits clean through ezdxf.recover, delete_block's in-use check is pinned, the live listing reports kind None (against a fake that models only the measured members, so it cannot enshrine an invented one), and the live attach refuses a held name (xref and plain block, either case) without dispatching. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
8b14d4ef8d |
feat(task-7): SECTION 21 - the mechanical part model as six tools
engineering/mech/draw.py is the only module in the package that touches a backend: it turns the pure engine's primitive descriptions into entity_create_* and dimension_* calls, places them in WCS, and writes the part model back onto the drawing as ACADMCP_MECH XDATA on an anchor POINT. It is not a contract member and neither are the tools - exactly like gear_draw_* and titleblock_apply_iso_a3, it composes the generic members, so it is written once and works on both engines by construction and no capability key is needed. No new ActiveX call was written, so there was nothing to probe on the live seat; measured instead that every one of the 23 backend members draw.py calls exists on ComBackend and that ComBackend has no abstract methods left. mech_part_draw takes one model - a turned profile or a plate outline plus typed features - and draws its views in first-angle positions (third on request), dimensions them and records the placement. mech_view_add reads the model back out of the drawing and adds a side, top, section (full/half/offset/revolved) or detail view months later without the caller re-describing the part. mech_dimension_part lays out ISO 129 dimensions with no overlapping text, resolves ISO 286 fits against the measured nominal, and moves the holes into a table past a threshold. mech_hole_pattern exposes the same expansion for a drawing that was never built from the model - with its own diameter guard, because Hole.validate needs a part and a standalone pattern has none. mech_part_inspect reads the payload back and never modifies the drawing. mech_part_from_spec draws a whole sheet inside one transaction. Every part is validated before the transaction opens, so a refusal leaves the drawing untouched and names the path (parts[1]: segments[0].d_outer: ...), and the rollback is shielded with the shape engineering/pid/spec.py documents: anyio cancellation is level-triggered, so a bare await in the handler would be cancelled before the rollback body ran and leave half a sheet inside an open transaction. fits goes through dimension_intents(fits=...), the API Task 6 shipped, rather than being stamped on at draw time: that is the path that validates a key by name and refuses a fit on a reference dimension or on a hole that moved into the table. It is scoped per view first - a fit on segment[0] names nothing in the end view, and refusing there would make a correct three-view sheet undrawable - and any key no view claimed is handed back to dimension_intents so the refusal is written in its own vocabulary. SECTION 21 registers the six tools in the new mech pack, with alias records (SECTIONPLANE, ARRAY plus shop-floor synonyms in English and Turkish - mil, kademeli mil, kama, pah, kesit, gorunus), a regenerated tool inventory, the README release snapshot at 210 tools in 24 groups, and the frozen group-size snapshot gaining mech: 6. Lean is deliberately untouched here: spec section 11 puts three of these on the lean surface together with group G's two sheet tools, and Task 15 makes that edit once across all four branches. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
bd73b3a854 |
fix(task-6): a reachable ISO 286 route, a tolerance schema that refuses, a reference dimension
Three review findings, all root causes in `engineering/mech/dimension.py`.
1. The ISO 286 fit path was unreachable from the module's own pipeline.
`resolve_tolerance` resolved `intent.fit` correctly, but nothing produced a
DimIntent carrying one: no feature and no segment has a fit, and
`dimension_intents` constructed every intent without `fit=`. Only a
hand-built DimIntent - which is what the tests used - reached the code, so
the spec's `mech_iso286_on_dimension` and the `mech_assembly` benchmark's
"ISO 286 fits on the bearing seats" had no route.
`dimension_intents(..., fits={key: code})` now stamps the code onto the
intent its key names, and the part's own diameters became addressable one
at a time through the new `segment_key(i, bore=...)` -> "segment[1]",
"segment[1].bore"; a feature's stay addressable by id. A key that names
nothing is refused with the names that exist, a malformed code is refused
where it is attached rather than at draw time, a fit on a reference
dimension or on one that already carries a tol is refused, and a fit on a
hole whose diameter moved into the hole table (which has no tolerance
column) is refused by name instead of vanishing. Task 7's planned
`dimension_part(..., fits=None)` passes straight through - the argument is
additive and keyword-only, so every call written against the pinned
signature keeps working.
The fit also now reaches the *text*: `intent_text` expands the `<>`
placeholder and appends the code, so `text_rects` measures the string that
is actually drawn and a hole that already names itself ("⌀6") keeps its own
text and gains the code.
2. An explicit tolerance was silently discarded when `tol` omitted "mode".
`mode = tol.get("mode", "none")` and `build_dim_override(0.05, 0.05,
"none", None)` returns `({}, None)` without raising, so a ±0.05 resolved,
echoed its own numbers back in the payload, and drew a dimension with no
DIMTOL/DIMTP/DIMTM at all. `DimIntent.tol` now has a schema - {"mode",
"upper", "lower"} and nothing else - validated by `_explicit_tol`: an
unknown key, a missing "mode", a non-dict, and deviations under a mode that
writes none are each refused by name. The mutual-exclusion guard reads
`tol is not None` rather than truthiness, so `tol={}` is refused too.
3. The ISO 129-1 "no measurement twice" test was vacuous and the property was
false. The old test built the key `_dedupe` uniquifies as the last step of
`dimension_intents`, so it could not fail; meanwhile `style="chain"` emitted
20, 40, 15 *and* 75 as four plain DIMENSIONs. `redundant_linear` now finds
the span that shorter ones tile end to end on the same axis and level, and
`dimension_intents` marks it as an auxiliary (reference) dimension - the new
`REFERENCE_FORMAT` "(<>)", which renders "(75)". The plan's own test still
holds (the 75 is present); it is no longer a fourth plain dimension. The
error is one-sided on purpose: a tiling that is found is real, a tiling the
greedy walk misses leaves the dimension plain, which is the direction the
repository's critique rule wants. Baseline and ordinate parenthesise
nothing, and two horizontal chains at different heights are not each other's
pieces.
Tests: the vacuous gate is replaced by four that fail against the pre-fix code
- `redundant_linear` on the shaft's plain intents returns (3,) there and ()
here; the parametrised "a tolerance is either refused or reaches the dimension
variables" gate resolves the mode-less shape to an empty DIMVAR override
there; and `fits=` is a TypeError there. `_dedupe` is now exercised through a
duplicate fed in via the view's own dims, which the collector does not
generate itself. 46 tests in tests/test_mech_dimension.py (was 23).
Live AutoCAD: no finding was measured live and no new ActiveX call was
written - this module is pure Python with no backend, no async and no DXF. A
DIMTOL probe against the running seat was attempted twice and
`GetActiveObject("AutoCAD.Application")` blocked past the ~90 s contention
window both times, so the live engine was unavailable; no scratch document was
created (the probe never got the application object) and none was left open.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
3ef316d520 |
feat(refs): xrefs, raster underlays, data extract and real DWG output
SECTION 24 completes at eleven tools with xref_attach, xref_manage,
image_attach, data_extract and drawing_export_dwg, on the four contract members
that genuinely differ per engine -- backends/contracts/refs.py. Everything else
in the sheet track composes the generic members and is written once.
The ActiveX members were read off the AutoCAD 2026 seat's own type library
(C:\Program Files\Common Files\Autodesk Shared\acax25enu.tlb, "AutoCAD 2025
Type Library" 1.0, the library the running 25.x seat registers) before a line of
the COM path was written, and the measurement is in the code beside the calls:
IAcadModelSpace.AttachExternalReference(PathName, Name, InsertionPoint,
Xscale, Yscale, Zscale, Rotation, bOverlay, Password)
IAcadModelSpace.AddRaster(imageFileName, InsertionPoint, ScaleFactor,
RotationAngle)
IAcadBlock: IsXRef (get), Path (get AND put -- so the repath is an assignment,
not a method), Reload(), Unload(), Bind(bPrefixName), Detach(),
XRefDatabase (get)
IAcadDocument.SaveAs(FullFileName, SaveAsType, vSecurityParams)
AcSaveAsType: ac2000_dwg=12 ac2004_dwg=24 ac2007_dwg=36 ac2010_dwg=48
ac2013_dwg=60 ac2018_dwg=64 (=acNative)
The running seat itself was not answering COM while this landed (its window was
Not Responding and GetActiveObject never returned), so the type library -- which
is the same seat's declared surface and reads without a call into the process --
is what the members are measured from; no document of the operator's was opened
or touched. This repository has been bitten four times by a fake that invented a
member, so the COM fakes in the tests model those names and nothing else.
ActiveX angles are radians, so the degree-to-radian conversion happens at that
boundary and nowhere else.
Headlessly, ezdxf.xref.attach carries the attachment (measured on ezdxf 1.4.4:
block flags 20 for an attachment and 24 for an overlay, so "is this an xref" is
flags & (BLK_XREF | BLK_XREF_OVERLAY) -- masking BLK_XREF alone misses every
overlay), add_image_def + add_image the raster, with Pillow reading the pixel
size so the placed image keeps the file's aspect.
Three capability keys, declared in both maps:
dwg_write -- measured absent here (odafc.is_installed() is False), so the
ezdxf entry is a runtime re-evaluation like viewport_render's
matplotlib check rather than a hardcoded False: installing the
ODA File Converter starts the call working with no edit to the
map. The refusal names the install route and drawing_export_dxf.
xref_live -- reload and bind need a live seat's xref manager and are refused
headlessly; list, detach and path are headless and are not
behind the key.
xlsx_write -- openpyxl is optional and absent here; CSV is always available,
so the refusal never blocks the deliverable and says so.
Two numbers the plan predicted wrongly are corrected to what the registry
actually does. `block` outranks `drawing` in _GROUP_TAG_PRIORITY, so the two
xref tools file under `blocks` (9 -> 11) beside block_insert -- which is where
an xref belongs, being a block definition that lives in another file -- and
`drawing` moves 11 -> 12, not 11 -> 14. And `data_extract` must not say "parts
list" in its own text: that is the golden discovery query for
entity_create_table, and a file writer outranking the tool that draws the thing
is a regression the tuning bar catches. It is described by its destination --
a file -- instead.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
de8dc8f813 |
fix(task-13): read revision/balloon state from the space it is drawn on, and never at 200
Three findings, one family: a guard that reads the WRONG SET silently stops
guarding and the drawing gets a duplicate or a wrong number with no refusal.
1. Layout-scoped state was read from the wrong space. add_revision called
read_revisions and add_balloon called read_balloons BEFORE enter_layout;
both read entity_list, which follows the current space, so the guard
inspected Model while the rows and balloons lived on the layout -- and the
layout is the sheet workflow (sheet_frame and titleblock_apply both take
one). Measured headlessly: two revision_add(rev="B", layout="SHEET1") calls
both returned created=True, handles 46 and 5A, both bbox
{min [230,273], max [410,287]} -- a second heading band and a second B row
drawn exactly on top of the first, twelve TEXTs on the tab instead of six.
Both reads now happen inside the entered layout, and the whole body sits in
the try/ so the caller's tab comes back on the refusal path too.
2. bom_extract truncated the parts list at 200 INSERTs and printed a wrong QTY
into a real TABLE. extract_records passed its own limit=200 default straight
to entity_list, the tool exposed no limit, and nothing in the payload said
the list had been cut: 250 bolts reported [("ISO 4014 - M12x60", 200)].
all_entities now pages entity_list (offset loop, PAGE_SIZE 1000, plus a
no-new-handles guard so a backend that ignored offset cannot spin) and
extract_records(limit=None) reads the whole drawing. bom_extract exposes
limit (0 = no cap) and reports truncated measured, by asking for one record
past the cap.
3. The balloon clash guard did not fire in two routine cases. (a) targets is
optional in the tool, so the clash test compared () != () -- False -- and
two untargeted balloons carried item 1 with no refusal. The renumber arm
above has already returned for the balloon that stands for these targets, so
anything still carrying the number is a clash, whatever its targets; the
message names the handle and says "no targets" when it has none. (b)
read_balloons and read_revisions took entity_list's 200-entity default, so a
drawing whose first 200 CIRCLEs are a hole pattern read back no balloons at
all and every guard passed blind -- and index = len(existing) restarted at
0, stacking revision bands. Both readers now go through all_entities.
Evidence, headless (ezdxf), each finding's own repro before -> after:
1 created True/True, handles 46+5A, 12 TEXTs -> created True/False, one
handle 46, 6 TEXTs; renumbered False/False -> False/True, same handle 33
2 records 200, rows [(..., 200)] -> records 250, rows [(..., 250)]
3a two balloons handles 2F+35, no refusal -> refused, naming balloon 2F
3b read_balloons() == () with 206 circles -> the balloon past the 200th
circle is found, the rerun renumbers, the item-1/BBB clash is refused
3c 200 notes + rev A twice + rev B -> created True/False/True, row 1 then
row 2 (was: every band at row 1, on top of the last)
Six regression tests added: one per finding plus the layout-scoped twin of
each, which is what would have caught all three.
The live engine was UNAVAILABLE for this round:
win32com.client.GetActiveObject("AutoCAD.Application") did not return within
90 s against the running acad.exe (PID 40068), and the ComBackend probe timed
out on its first call at both COM_CALL_TIMEOUT=60 and 180. No second AutoCAD
was launched and no document was opened. No new ActiveX call is introduced by
this fix -- it only reorders existing calls and pages entity_list(offset=),
which both engines already implement.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
01213fc5f5 |
feat(task-6): dimension intents, ISO 286 fits and an overlap-free layout
engineering/mech/dimension.py collects what the features asked to have dimensioned, adds the part's own sizes (chain, baseline or ordinate for the axial lengths, a diameter per segment and per bore, the two overall sizes of a plate), and removes the duplicates - ISO 129-1 says each dimension appears once, and a test asserts no measurement is placed twice. Fits and tolerances are resolved through the modules that already own them: engineering.fits for an ISO 286 code and engineering.tolerances for an explicit ISO 129 tolerance, including build_dim_override's sign convention (the lower deviation is passed as the magnitude of the minus side, exactly as server.py::_fit_to_tolerances does). A H7 bore at 40 mm resolves to +0.025/0 - the correctness check the spec names. A fit together with an explicit tolerance, a fit outside the authored ISO 286 range, and a fit on an intent with no measurable nominal are each refused by name rather than guessed. The layout is the part that had to be measured rather than asserted: every intent's text is turned into a rectangle by the same helper the test uses, and an intent is placed on the lowest level whose rectangle is free, with the level pitch clamped to clear the text whatever the caller passed. The test then asserts the placed rectangles are pairwise disjoint - including on a crowded plate and with a deliberately too-small step. That is the same property the repository's dim_overlap critique focus checks on the finished drawing. The plan's layout clamped that pitch to the text HEIGHT on every axis, which is only the stacking direction for the row of dimensions under the view. Beside the view the levels march in x, so the extent they have to clear is the text WIDTH: measured here, three diameter labels are 9.45 mm wide (9.45, 5.6) at a 8.0 mm pitch, so a shaft's three segment diameters - all on the y = 0 centreline, hence all on different levels - overlapped by 1.45 mm. The pitch and the within-level span are now both taken per axis from the same _text_size helper text_rects uses, which makes the disjointness a property of the algorithm rather than of the label lengths that happened to be in the test. Over hole_table_threshold holes the per-hole diameters leave the view and become a table instead, grouped by diameter, thread, counterbore and depth, one tag per group and the quantity on every row. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
978c1075ad |
fix(task-5): cut faces on the real chord, cross sections that see features, a section with no dashed cut edge
Three defects, all of them the same mistake in three places: the cut face was built from something other than the geometry it claims to show. 1. A prismatic cut face removed a feature by its BOUNDING BOX. `Hole.removal_box` is a square, so the gap punched in the cut face was the full diameter wherever the plane passed. On the plan's 80x50x8 plate with a Ho10 hole at (40, 25): a plane at y=29.9 grazes the hole (true chord 1.990) and the section still showed an 8 mm gap through solid metal - 560.0 mm2 hatched against a true 624.08, a 64 mm2 error in the hatched area AND a wrong drawn outline. `Slot` had the same obround-as-box. Features now answer `cut_spans(part, p1, unit)` with their own exact chord: `_circle_chord` for a hole, the union of two circles and a rotated rectangle for a slot, the polygon's own crossings for a pocket, and an exact slab clip of `removal_box` as the default. `_box_span` (the corner projection, which is the box's shadow and not a chord at all) is gone. 2. A transverse revolved section ignored every feature and the honesty rule never fired. A cross section through a DIN 6885-1 keyway came out as a plain hatched disc with `omitted == ()` - the commonest mechanical cross section there is, hatched straight over the 12x5 keyway. The face is now built by `_transverse_face`: its radii come from `radial_profile` (so a groove, an undercut, a bore or an ISO 6410 internal thread is in the face already, which the raw segment diameters could not report), a non-axisymmetric feature is asked for its own `cross_section` notch record, and one the plane really passes through with no such record is listed in `omitted` with its reason rather than hatched over. `Keyway._notch` is the one calculation the end view and the cut face both come out of. 3. A section drew its own cut boundary as a HIDDEN (dashed) line, because the longitudinal branch reused `silhouette_prims` and the silhouette draws the bore dashed - correct for an un-cut view, wrong for a section, where that line IS the hatch loop's boundary. ISO 128-50 bounds a surface lying in the cutting plane with a continuous wide line and ISO 128-3 leaves hidden detail out of a sectional view; via ROLE_LAYER['hidden'] this would also have put the cut boundary on the HIDDEN layer in Task 7. New `section_profile_prims` emits the cut outline all-continuous, and `half=True` keeps the dashed bore on the -Y half only, which is the half a half section does not cut. And the claim the last commit made without earning it: the hatched area and the drawn outline are now literally one calculation. The longitudinal loop is the *emitted* outline flattened (`_flatten_path`), so a chamfer or fillet that substitutes a silhouette corner is cut out of the hatch exactly where it is drawn - a 2 mm 45 deg chamfer takes its 2 mm2 off the 1000 mm2 half face instead of being hatched over. Eleven new tests, every one of them red on the parent commit: the hole chord at 0/4/4.9 mm off centre, a tangent plane leaving the face whole, the 45 deg slot, the keyway cross section against its own analytic area, the feature a cross section cannot project, the feature the plane misses, the groove read off the profile, the continuous cut boundary, the half section's dashed half, and the chamfered cut face. No new ActiveX member is called: all three fixes are pure geometry in the backend-free `engineering/mech` package. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
72bd17d024 |
feat(task-5): sections, cut faces, material hatch and detail views
engineering/mech/views.py grows the two remaining view kinds. A section's cut
faces come out of the same radial profile the silhouette does, so the hatched
area and the drawn outline are one calculation and cannot disagree: a solid
shaft's half-section loop measures exactly the sum of its segment rectangles,
and a bore closes the loop on itself rather than being hatched over.
ISO 6410's section convention falls out of the model rather than being special-
cased: an internal thread's radial_edit already raises the bore to the major
diameter, so the hatch stops there. ISO 128-3's rib rule is a flag on the
feature - a pocket marked no_section_hatch is drawn and left unhatched, while
the rest of the cut face is hatched with the part's ISO 128-50 material.
Four styles, each either implemented or refused by name with the alternative
rather than approximated: full and half on a longitudinal plane through a
revolved axis; full and revolved on a transverse plane (the annulus, flattened
at 2 degrees - 0.015% of the radius, stated in CIRCLE_SEGMENTS rather than
hidden); full and offset on a prismatic part, where through features split the
cut face and pockets reduce it to the remaining thickness. A plane that misses
the part, or that grazes an outline vertex so its crossings cannot be paired, is
refused instead of producing a guessed cut face.
Details scale a circular region of a parent view, emit the ISO 128-34 circle and
letter for the parent and the "A (5:1)" label for the detail itself, and report
every feature that falls outside the circle in omitted - the honesty rule again.
Three test assertions were corrected to the measured truth rather than the
engine bent to them, each verified by running the code:
* the ISO 6410 test asked for the whole cut-face loop's minimum to be the M20
major (r=10). It is not, and must not be: over the 5 mm that is drilled but
not threaded the loop closes on the real 16 mm drill (r=8). The loop is
((0,10),(0,25),(25,25),(30,25),(30,8),(30,8),(25,8),(25,10),(0,10)). The test
now pins both spans, which is the convention it meant to assert.
* the transverse-annulus areas were pinned at rel=2e-4. An inscribed regular
180-gon is exactly 1 - (n/2pi) sin(2pi/n) = 2.0307e-4 under the circle, so
2e-4 rejects the very flattening CIRCLE_SEGMENTS declares. The tolerance is
now 2.1e-4 and the test computes the deficit and pins it, so the number is
derived rather than guessed. CIRCLE_SEGMENTS' docstring now states both
figures: 0.015% radial (the 2 degree chord's sagitta) and 0.0203% of area.
* tests/test_mech_views.py pinned VIEW_KINDS == ("front","side","top"), which
this task deliberately grows. It now pins the three orthographic kinds as the
first three and the full five-kind tuple.
_is_longitudinal takes only the plane; the plan's signature also took the part
and never read it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
499b642fbd |
feat(sheet): revisions, the ISO 7573 parts list and ISO 6433 balloons
SECTION 24 grows to six tools: revision_add, bom_extract, bom_table,
balloon_add.
bom_extract reads. It walks the INSERTs through the generic members already in
the contract -- entity_list, block_get_attributes, entity_get_xdata -- and
returns parts-list rows from the ACADMCP_MECH std_part payload, falling back to
the block's own ATTRIBs and reporting which of the two each row came from. A
block with neither is skipped rather than guessed at, and the tool never writes
to the drawing.
bom_table draws the rows as a real TABLE, 180 mm wide (ISO 7573: the item list
is as wide as the title block), growing upwards from directly above it with the
heading row against the block and item 1 the row above -- which is what ISO 7573
asks for on a drawing. A TABLE is drawn downwards from its insertion point, so
the upward list is inserted a table height above its anchor with the heading as
the last row; one table_layout feeds both the real TABLE and the pure
table_prims, so the two renderings cannot disagree.
balloon_add draws the ISO 6433 reference -- numeral, leader, dot on the item --
and writes the balloon payload naming its targets. A rerun over the same
targets renumbers that balloon instead of drawing a second one, and an item
number already used for different targets is refused by name with the other
balloon's handle.
revision_add appends a row to the revision block, is idempotent per revision
code (a repeat draws nothing at all), and optionally clouds the changed regions
and tags them with the triangle. Clouds are refused up front, carrying
capability "revcloud", on an engine that has no revcloud member -- the COM
backend -- rather than leaving half a revision behind.
Declared: ISO 7200 does not standardise the revision block's geometry and
ISO 7573 does not fix the item list's column widths or row height, so both
reuse this repository's 180 mm / 7 mm ruling and say so in their SOURCE
docstrings. ISO 6433's "numeral at least twice the dimension character height"
is met by the numeral being 1.4x the balloon radius: the 4 mm default clears
2.5 mm dimension text, and balloon_add's docstring tells a sheet dimensioned at
3.5 mm to pass radius=5.0.
Three corrections to what the plan wrote, each measured rather than assumed:
* extract_records read `block_get_attributes(...)["attributes"]`. Both engines
return the flat {tag: value} mapping itself (ezdxf_backend.py:6687 builds it
from `ent.attribs`, com_backend.py:5703 from `ref.GetAttributes()` as
{TagString: TextString}), so every attribute fallback would have been
silently empty -- measured headlessly, where a PLATE insert carrying only a
DESIGNATION ATTRIB extracted to nothing.
* draw_bom_table now reports `entity_type` / `representation` /
`child_handles`. `entity_create_table` returns EntityInfo(type="TABLE") whose
handle is the first CHILD of a composite on the headless engine, so reading
that handle back gives a rule LINE, not an ACAD_TABLE -- the contract
tests/test_table_leader.py already pins. A caller that means to edit the
table afterwards has to be told which of the two it got.
* add_revision reports one `tags` entry per tag asked for ({at, handles}), not
one per entity: a tag is two primitives, so a flat handle list claimed twice
as many tags as the caller requested.
Discovery: `bom_extract` / `bom_table` / `balloon_add` each entered the index
heavy with "parts"/"list" tokens and took top-1 for the bare query "parts list"
away from `entity_create_table` (a BM25 tie broken alphabetically). Narrowed on
my side only -- the reader speaks of the bill of materials, the drawer names a
table, the balloon names an item -- never by touching the golden case.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
b2f858212f |
fix(task-4): the end-view occlusion rule, the double-drawn groove, the left view
Three defects in the orthographic view engine, all one missing idea: the engine
had no visibility rule and no single owner for the silhouette.
1. `_end_circles` inverted the hidden-line rule. Walking the bands from the
viewing end it drew a circle only when its radius EXCEEDED everything nearer,
and roled every such circle `hidden` unless it was the first band - so the one
edge that CANNOT be occluded (a step face larger than the material in front of
it) shipped dashed on HIDDEN, and the circle that really is covered was not
drawn at all. `_front_max` is now the rule: an edge of radius r at station x is
continuous when r is larger than every outer radius between x and the observer,
dashed when it is not, and it is always drawn. Bores follow the mirror image -
you see down a bore only while it stays at least as wide. Each distinct radius
is emitted once, because two coincident circles are a duplicate entity.
The same rule now roles a feature's axis-centred end-view circle, whose axial
station comes from `removal_box`; a feature that reports none keeps its own
verdict rather than having one guessed.
Ground truth by ray cast along the axis of the same solid of revolution
(segments 20x25, 40x30, 15x20; observer at +X, probe just inside each edge):
r=10 at x=75 -> first surface x=75 -> VISIBLE (was visible, kept)
r=15 at x=60 -> first surface x=60 -> VISIBLE (was HIDDEN, fixed)
r=12.5 at x=20 -> first surface x=60 -> HIDDEN (was not drawn, fixed)
2. Every axisymmetric groove was drawn twice - once as the notch
`radial_profile` cuts into the silhouette, once by the feature's own
`prims()`, which `_feature_layer` appended unconditionally. Six exactly
coincident LINEs per grooved shaft, which is precisely what
`critique.py::_check_duplicate_entities` matches, so premium rule 7 could
never be met on a part carrying a retaining or O-ring groove. `_profile_owned`
now drops a feature primitive that the body already emitted, and drops a
revolved front view's `visible` silhouette line from any feature that edits
the radial profile: the spec's rule is that grooves cut a notch in the
silhouette, and the notch belongs to the one calculation. Suppression is
"the profile already drew this", not "this feature edits the profile", so a
blind bore keeps the bottom line the profile cannot express, and an internal
thread keeps its ISO 6410 limit line.
A groove straddling a step was worse than duplicated: the feature reads one
surface radius for a span that has two, so it drew a groove floor through
solid material and left the +Y path with four odd-degree nodes. It now has
two - its two ends on the axis.
3. `build_view` validated `side` and put it in ctx, but the prismatic branch
ignored it: `side="left"` returned the right-hand view, with every feature on
the wrong side of the sheet and a symmetric outline rectangle to hide it. An
observer at -X sees screen-right = -Y, so the feature layer is now mirrored
about the outline's mid-Y. The top view is always seen from above and does
not move with `side`; that is now said in the docstring and pinned by a test.
Tests: the two that pinned the inverted rule are rewritten around the ray cast,
and one of them contradicted its own name. Seven tests added, and the prismatic
side-view test's hole moved off the y=25 mirror axis, where it could not tell a
left view from a right one. Nine of them fail against the previous `views.py`
and pass against this one.
Live AutoCAD was unavailable for a SOLPROF cross-check: the running AutoCAD 2026
(pid 40068) reports Responding=False and `GetActiveObject("AutoCAD.Application")`
never returned inside 100 s, so no scratch document was created and none is left
open. No new ActiveX member is called by this change - views.py is pure.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|