Two wrong-drawing bugs in SECTION 22.
1. _hex_points defaulted to start_deg=0, putting vertices at 3 and 9 o'clock,
so the plan of an M12 hex head measured 18 mm (across flats) across the
vertical while the elevation drew that same head 20.78 mm tall (across
corners e, silhouette edges at +/- e/4 - the projection of a hexagon with
vertices top and bottom). Place the two blocks in projection and the two
views of one part disagree. The default is now 30 deg, named HEX_START_DEG
and documented on both the constant and _hex_points as the convention the
elevation is the projection of, so a future fourth caller cannot pick the
other one by accident. The three top builders (_hex_fastener_top,
_hex_nut_top, _socket_head_top) inherit it.
2. _thread_feature read the pitch from params['size'] via the ISO 261 table
while drawing the geometry from params['d'], never cross-checking the two.
feature_spec('thread', {'d': 8.0, 'length': 20.0, 'size': 'M20'}) drew an M8
minor diameter and returned dims['pitch'] = 2.5 with ISO 261 cited as the
source - one thread's pitch on another thread's geometry, a silent wrong
number carrying a standards citation. A mismatch is now refused by name,
like every other check in the module. std_feature_draw's params description
says so.
Guard tests: the old top-view test asserted only len(points) == 6 and never a
vertex coordinate, so the orientation was untested. Added the vertex
coordinates, the plan-vs-elevation silhouette-height invariant across ISO 4014
/ 4017 / 4032, the socket screw's dk invariant, and the refused thread pair.
No ActiveX member is added or changed by either fix; both are pure geometry and
validation, so no live measurement is cited. The live AutoCAD could not be
probed for a confirmation run - GetActiveObject blocked past 150 s under
sibling contention.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
engineering/mech/stdparts.py turns the Task 8 tables into real blocks. catalogue()
searches 83 transcribed parts by designation, standard, size or family;
block_spec() emits the typed primitives and DESIG/STD/SIZE/MAT ATTDEFs
block_define takes, in side/top for fasteners and ISO 8826-1 simplified /
ISO 8826-2 detailed for bearings; insert_std_part() defines the block once,
inserts it and writes the std_part ACADMCP_MECH payload the skeleton pins, so
the parts list is a read of the drawing rather than a naming convention.
Threads follow ISO 6410 - minor at 0.8 x major, a thread-length limit line to
the major, a three-quarter minor arc in the end view.
std_feature_draw() adds a thread, a DIN 509 undercut, a DIN 471/472 groove, a
DIN 332 centre hole or an ISO 3601-2 O-ring groove to geometry that already
exists. Its dimensions come from the shared standards registry, never from this
module: an absent table, a size outside coverage or a row missing a dimension is
refused by name, and the DIN 509 relief is drawn from the profile its table
publishes rather than reconstructed here. DIN 332 form R is refused outright.
An unknown designation is refused with the nearest catalogue entries; nothing is
drawn approximately.
SECTION 22 registers the three tools in the new mech pack, with alias records
(INSERT plus shop-floor synonyms in English and Turkish), a regenerated tool
inventory, the README release snapshot at 207 tools in 24 groups, and the frozen
group-size snapshot gaining mech: 3.
Two plan corrections, both verified by running the code:
* the plan's @cad_tool summaries for std_part_insert (118 chars) and
std_feature_draw (130) overran discovery.serialize.MAX_SUMMARY_CHARS = 110, so
tests/test_tool_registry.py::test_no_authored_summary_is_long_enough_to_be_truncated
failed - they would have shipped rendered as "...". Both are shortened to 99
and 104 characters with the same content.
* the plan's file list omitted tests/test_tool_packs.py, which pins the pack
registry, the tool_packs report and the group count. It now carries MECH_TOOLS
and distinguishes ALL_PACKS (declaration order, what "available" reports) from
ALL_PACKS_ENABLED (sorted, what "enabled" reports) - those two lists stopped
being the same list when "mech" was appended after "settings".
No new ActiveX member is called: the module drives block_list / block_define /
block_insert / entity_set_xdata / entity_create_* only. The COM path was still
executed live once on AutoCAD 2026 in a scratch document created and closed by
the probe: the bolt block defined with layers CENTER+GEOMETRY, attributes read
back as DESIG/STD/SIZE/MAT = ISO 4014 - M12x60 / ISO 4014 / M12x60 / 8.8, the
ACADMCP_MECH std_part payload round-tripped through entity_get_xdata,
STD_ISO_15_6205_SIMPLIFIED inserted, and the M20 thread's three primitives
landing on GEOMETRY.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
AcadApplication has no GetVariable/SetVariable members; they live on
AcadDocument. Measured on the running AutoCAD 2026 (25.1s, 2026-09-22,
scratch Documents.Add(), Close(False)):
hasattr(app, 'GetVariable') -> False
hasattr(app, 'SetVariable') -> False
app.GetVariable('INSUNITS') -> AttributeError: ... IAcadApplication
instance ... has no attribute 'GetVariable'
doc.GetVariable('INSUNITS') -> 4
doc.GetVariable('MEASUREMENT') -> 1
doc.GetVariable('FILEDIA') -> 1; doc.SetVariable('FILEDIA', 0) -> None,
reads back 0, restored to 1
doc.GetVariable('AUDITCTL') -> 0, 'CMDACTIVE' -> 0, 'USERS1' -> ''
Fifteen call sites in backends/com_backend.py still went through the
Application inside `try/except ... log.debug`, so on a live seat they
silently degraded: MEASUREMENT defaulted every seat to metric,
drawing_info reported units from a failed INSUNITS read, drawing_audit
never set AUDITCTL, the CMDACTIVE guards of system_run_command /
system_run_lisp never fired and run_lisp never read USERS1 back. All are
rerouted through `_acad_doc()`; the try/except stays only where an
optional read is defaulted (INSUNITS -> "Unknown", AUDITCTL absent on a
host that lacks it, USERS1 after the expression ran) and the log line
says so.
Linetype loading, measured the same way: `SendCommand("_-LINETYPE _LOAD
CENTER acadiso.lin\n\n")` loads nothing with FILEDIA=0 and leaves the
command at `Enter an option [?/Create/Load/Set]:` (LASTPROMPT), which
makes the whole seat answer RPC_E_CALL_REJECTED to every client until
ESC is pressed; with FILEDIA=1 it opens the modal "Select Linetype File"
dialog. `doc.Linetypes.Load("CENTER", "acadiso.lin")` returns None and
the table grows 3 -> 4; a repeat raises 'Duplicate record name', an
unknown name 'Undefined linetype', a missing file 'File system error'.
`_ensure_linetype_loaded` and `linetype_load` now call `Linetypes.Load`
(MEASUREMENT still read on the document to pick the .lin), touch no
FILEDIA, and report a failure with the English excepinfo description.
`apply_standard` reads every variable it will write before the first
style is created, so a read the engine refuses is a refusal with nothing
written (it used to fail after ISO-25 / ISOCP were created and current).
Fakes: every application fake refuses GetVariable/SetVariable
(tests/test_styles.py's COM fixture carried them on the Application,
enshrining the wrong shape); the members exist on document fakes only.
Regression tests per rerouted site: linetype load via Linetypes.Load with
MEASUREMENT on the document, drawing_info units from the document,
AUDITCTL set/restored on the document, CMDACTIVE/USERS1 on the document,
apply_standard refusing before any write.
Live end-to-end with the real ComBackend on a scratch document:
apply_standard('iso') -> INSUNITS 4, ISO-25 (already in acadiso.dwt,
created: false) and ISOCP (created: true) current, second call created:
false / changed: {}; linetype_load('CENTER') -> Linetypes 3 -> 4, FILEDIA
stays 1, repeat already_loaded, 'NOSUCHLT' refused by name;
_ensure_linetype_loaded('HIDDEN') -> 3 -> 4; drawing_info units 'mm';
drawing_audit AUDITCTL 0 -> 0; system_run_command ok;
system_run_lisp('(+ 40 2)') -> '42'.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Task 24 (merge sanity) on main after the five track E groups merged.
- TOOL_PACK_NAMES = ("core", "pid", "settings"); PACK_TOOL_NAMES["settings"]
is exactly the 22 SECTION 20 tools. Styles and page setup stay in core.
- LEAN_TOOL_NAMES += page_setup_apply, batch_plot (53 -> 55).
- _GROUP_TAG_PRIORITY / _GROUP_TAG_LABELS: "style" moved up next to "pid",
"pagesetup" -> page_setup and "environment" -> environment added; the 28
SECTION 19/20 decorators gain their section tag, so _tool_groups() reports
styles 10 / page_setup 6 / environment 22 (23 groups, 204 tools) and
pack == group == section for the settings pack.
- SECTION headers, backends/base.py composition, contracts/__init__.py
exports and the layer_states feature entry were already correct after the
merge (read and confirmed, nothing edited).
- Pack text: config.py, .env.example, README config row; README <sub> line
204 tools in 23 groups; release snapshot 3259 collected tests (measured).
- docs/tool-inventory.json regenerated; registry snapshot re-derived.
- tests: test_tool_packs.py replaced (11 tests), test_capability_contract.py
+3 (composition, the agreed capability flags, layer_states honesty),
golden set +10 tuning cases (81 = 66 tuning + 15 holdout); all ten route
in the top 3 without alias edits.
Deviation from the plan text: TRACK_E_KEYS carries five keys, not six. The
plan's "mleaderstyle" (ezdxf True / com False) contradicts spec §8.1, which
retracted that key because the ActiveX route exists (§4.2); measured on the
tree: capability_keys() == {boundary_trace, chspace, interactive_prompt,
live_application, preferences, revcloud, wipeout}, and
ComBackend.mleaderstyle_create is a native implementation
(backends/com_backend.py:6752, is_capability_default -> False). The test now
also asserts the key is absent.
No new ActiveX call was written in this task, so no live probe was needed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Five tuning cases for the styles surface (DDIM, the ISO-25 set-current
paraphrase, the one-call drafting-standard paraphrase, the isocp text
style, and the dimstyle counting question) — measured against the live
catalog every one ranks top-1, so no alias vocabulary changed. The
docstring count moves to seventy-one (56 tuning + 15 holdout); the
holdout set is untouched.
Lean decision (spec §8.2): dimstyle_set_current, textstyle_set_current
and drawing_apply_standard join LEAN_TOOL_NAMES (50 -> 53); the seven
authoring/list tools stay full-only and all ten stay in core (no pack
claims them). Pinned by the new profile test in tests/test_styles.py,
written async like the rest of that module (its module-wide asyncio
mark warns on a sync test).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Live AutoCAD writes a real .dwt through SaveAs(path, ac2018_Template = 66) and
puts the description into the summary Comments; headlessly a .dxf template is
written through drawing_save_as and a .dwt request is refused with capability
dwt_write, naming the DXF route and the COM route. drawing_save_as's "dwt"
entry was 5 (acR13_dxf): a DWT request wrote an R13 DXF under a .dwt name.
Probed live on AutoCAD 2026 (typelib: ac2018_Template = 66, acR13_dxf = 5,
acTemplateDwg absent; the saved file starts AC1032, the document is rebound,
Comments takes). SECTION 19 is now 6 tools; SAVEAS joins SHARED_ACAD_COMMANDS;
templates/README.md documents the two files per template.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Documents.Add(<file>) accepts only a genuine DWT. Measured on AutoCAD 2026:
Add(templates/iso_a3_pid.dxf) returned the default acadiso drawing (layers
['0'], Layout1/Layout2) exactly as Add() and Add(<missing.dwt>) did, so
drawing_new(template=<bundled name>) reported ok:true with source
'bundled_dxf' over a blank document, and the explicit .dxf path route was
just as blank. ComBackend.drawing_new now converts any non-.dwt template
through AutoCAD itself (Documents.Open read-only -> SaveAs ac2018_Template,
older constants tried next -> Close(False)), caches the .dwt in the temp
folder keyed on path/size/mtime, hands Add the .dwt, and refuses a missing
template file instead of letting Add default silently. The tool result
carries template.dwt / template.dwt_cached. Re-measured end to end through
server.drawing_new on the real ComBackend: ansi_b_mech -> 11 layers, tab B,
DIMTAD 0 / DIMTIH 1 / DIMEXO 1.5; iso_a3_pid -> 17 layers, tab A3, second
call reuses the cached .dwt (0.8 s conversion once). Fake-ActiveX tests pin
the call shape and that the conversion document never stays open.
Headlessly the build's fallback wrote spec 4.1 only as header DIM variables,
and the renderer folds six of them, so DIMTAD/TIH/TOH/EXE/EXO/GAP/LUNIT/LWD
were a no-op: ansi_b_mech dimensioned with ISO text placement while
system_get_variable and AutoCAD said ANSI. The fallback now also stores each
value on the Standard dimstyle; the five DXFs are rebuilt (--check passes)
and a test reads the effective values off a DIMENSION drawn from each
template and asserts header and style agree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
An ISA-5.1 signal line has no pipe line number, yet every pneumatic /
electric line got the bare sequence as its number and a label, and ate a
process sequence number. Signal classes now leave line_number None (a
verbatim one is still honoured), seq None, no label. A radial port aimed
at the far end even with waypoints, so the first segment cut through the
bubble; aim_points (lines.py) aims at the first/last waypoint for both
draw_line and the dry run.
Merge note: benchmarks/adapters/autocad_mcp_pro.py (final group's file)
had its two _task_pid_roundtrip assertion lines moved to the new truth —
the signal row is unnumbered, the connector row is 3.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Four review findings against the COM styles block, all measured on AutoCAD 2026
(scratch documents from Documents.Add, closed without saving):
1. textstyle_create: `TextStyle.fontFile = "arial.ttf"` raises 'Filer error' for
every bare TrueType name (bundled presets included) after TextStyles.Add has
run, leaving a stub with an empty font that a retry meets as "already exists";
a full path is accepted but the STYLE record then carries the machine path.
`SetFont("Arial", bold, italic, 0, 0)` — the STYLE dialog's own route — stores
the clean `arial.ttf`. The font is now located before Add (`_com_locate_font`:
support path, then the Windows font folders), a TrueType is written by the
family/subfamily read from its `name` table (`_truetype_face`), an SHX by the
name given, an unlocatable file is refused with nothing written, and a write
ActiveX still refuses after Add deletes the entry it added.
2. _ensure_com_textstyle goes through the same helper, so DIMTXSTY / text_style
ARIAL and ISOCPEUR are created on the first call with a real font instead of
failing once and then silently binding a fontless style.
3. dimstyle_create / dimstyle_modify check a user DIMBLK/DIMBLK1/DIMBLK2 against
doc.Blocks before any write (`_com_require_arrowhead_blocks`, the headless
`_require_arrowhead_blocks` twin, same message and table-spelling rewrite);
a write that fails after DimStyles.Add restores the previous ActiveDimStyle
(discarding the unsaved overrides) and deletes the half-made style and any
preset text style the call created.
4. _com_dimensions_using un-narrows each `Layouts.Item(i).Block.Item(p)` —
declared IAcadEntity*, so `.StyleName` raised AttributeError under a makepy
cache and the blanket except reported `[]` — and swallows nothing.
The fake in tests/test_styles.py now models the measured ActiveX rules (bare
TrueType fontFile refused, SetFont by installed typeface, SetVariable refusing an
unknown arrowhead, IAcadEntity narrowing on block items, Delete) so the old code
cannot pass; nine tests cover the four findings. SECTION 18 docstrings state the
live engine's refusal rule for fonts and the pre-write arrowhead check.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
4fe2d96 matched custom keys with str.casefold(), but AutoCAD's key compare
is a simple one-to-one case compare, not Unicode full case folding.
Measured on AutoCAD 2026 (AddCustomInfo of the second spelling over the
first on a scratch document, Close(False)): Project/PROJECT, Grün/GRÜN,
é/É, ÿ/Ÿ, ł/Ł, σ/Σ, я/Я and dž/DŽ are one key ('Duplicate key'), while
Straße/STRASSE, ẞ/ß, kelvin/Kelvin-sign, µ/Μ, σς/ΣΣ and Dž/DŽ are two keys
(both stored) -- every one of those six is casefold()-equal. So with
'Straße' present, `custom={'BEFORE': 'b', 'STRASSE': 's2', 'AFTER': ...}`
was routed to SetCustomByKey, AutoCAD answered 'Key not found', and the
request raised with subject and BEFORE applied and AFTER never written --
the half-write class the fix claimed to close; a delete of 'STRASSE' over
'Straße' raised the same way; headlessly 'STRASSE' overwrote the 'Straße'
value instead of becoming a second tag; and the validator refused
{'Straße', 'STRASSE'} with a reason AutoCAD contradicts.
COM no longer routes from a Python approximation. An exact spelling goes
to SetCustomByKey; anything else is AddCustomInfo, and its 'Duplicate key'
(excepinfo scode -2145386475, measured) falls back to SetCustomByKey. A
delete is RemoveCustomByKey, and its 'Key not found' (scode -2145386476)
is reported as not deleted. Any other com_error keeps propagating. The
scode is matched before the English description because the HRESULT text
is localised.
The headless engine and the validator match on `custom_key_fold`: a
per-character fold to lowercase only when lower()/upper() are single
characters that round-trip and the character is one of the two; it never
changes string length and reproduces every measured pair (ß, ς, µ, the
Kelvin sign, Dž, ı and İ stay as they are). Docstrings in settings.py and
server.py now state that rule instead of 'case-insensitive'.
Tests: parametrized fold over the measured SAME / DISTINCT table (plus a
pin that casefold() merges the six DISTINCT pairs, which is why 4fe2d96
regressed), validator acceptance of each DISTINCT pair, headless
side-by-side storage and deletion of each pair, the fake SummaryInfo now
matches by the same fold and raises pywintypes.com_error with the
measured excepinfo tuples, the COM half-write scenario for each pair
(no SetCustomByKey guess, 'Key not found' delete tolerated, rest of the
request lands), the 'Duplicate key' fallback, and an unrelated
SummaryInfo failure still raising. The scodes were measured live before
the change; AutoCAD stopped answering COM (blocked in another agent's
command or a modal dialog) before the post-change re-run, so that run
is recorded as not done.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
SECTION 19 grows to five tools with drawing_template_list; drawing_new takes a
bundled name (iso_a3_mech, iso_a1_arch, iso_a3_pid, ansi_b_mech, ansi_d_arch)
or a .dwt/.dxf path and reports template: {name|path, path, source}.
scripts/build_templates.py builds templates/*.dxf through EzdxfBackend
(layer set, header DIM variables until group S's styles land, drawing_settings,
sheet tab, ISO 5457 frame on A3, page_setup_apply) and --check pins them
reproducible. One drift the plan's same-process measurement could not see is
fixed at the source rather than masked: ezdxf orders CLASSES by set iteration,
so two processes disagreed on LAYOUT / ACDBPLACEHOLDER; the section is re-keyed
(required list first, then by name) before the save.
The root .gitignore ignores *.dxf as generated output; templates/*.dxf is
un-ignored there, since the bundled set is the one DXF that is committed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two review findings on 32821c6.
1. Once the shielded rollback body runs after a real client cancellation it
can fail (the COM hard timeout, _safe_send_command's own deadline, an
ezdxf quarantine refusal). That RuntimeError escaped run_spec as an
ordinary error and the mcp lowlevel server, which had already answered
the cancelled request, tried to respond a second time: `assert not
self._completed` in mcp/shared/session.py escaped the server task group
and the whole session died (measured through the real transport: the next
system_status was never answered and Client.__aexit__ re-raised the
AssertionError). run_spec now decides by the exception it is handling:
after a cancellation the rollback error is logged and the cancellation is
what propagates, so the SDK's cancellation suppression applies; after any
other error the rollback error propagates as before, with the original
chained as its context.
2. The docstring promised the rollback on both engines, but on the live
AutoCAD 2026 ComBackend.transaction_rollback sent `_UNDO B` with no UNDO
Mark in the stack (StartUndoMark/EndUndoMark form an undo *group*, not a
Mark), AutoCAD answered "This will undo everything. OK? <Y>", SendCommand
blocked at that prompt, _run gave up after 60 s, the entities stayed and
every COM client was rejected until a human pressed ESC. transaction_begin
now types `_.UNDO _M` before StartUndoMark (refused with ok:false while
CMDACTIVE, where the Mark would be swallowed as input), and
transaction_rollback ends the group and sends `_.UNDO _B`, which returns
exactly to that Mark - also on an empty transaction, where `_UNDO 1` would
be one step too many. A rollback with no transaction is refused the way the
headless engine refuses it, because an unmarked Back is that prompt.
Measured with the real ComBackend in a scratch Documents.Add() document on
the running AutoCAD 2026 (closed with Close(False)): begin 31 ms ->
entity_create_line + circle -> rollback 63 ms -> 3 entities back to 1,
CMDACTIVE 0, no prompt; an empty begin/rollback leaves the older line;
begin/commit unchanged.
Tests: the two failure modes on run_spec (anyio scope cancellation with a
raising rollback completes the task group and logs; a ValueError with a
raising rollback still raises the rollback error with the ValueError as
context), the real-transport case (client.cancel mid-run, rollback raises,
the next request is answered, cleanup through the real rollback), the COM
shape now pins `_.UNDO _M, StartUndoMark, EndUndoMark, _.UNDO _B`, and
test_com_sprint3 grows a Mark-keeping fake document whose unmarked Back
fails the way the prompt does: begin before the group, rollback consumes the
Mark, rollback without a transaction sends nothing, begin refuses on
CMDACTIVE.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
The 2b9791f fix mirrored only the characters the first review happened to
measure ('=' and ';'), so `custom={'AAA': 'first', 'A:B': 'x', 'ZZZ': 'never'}`
still raised from AddCustomInfo('A:B') on the live engine after subject and
AAA were applied -- the same half-write for 11 other keys. Re-measured on
AutoCAD 2026 by sweeping every character 0x20-0x7E through a scratch
document: exactly thirteen printable characters are 'Invalid key' anywhere
in a key (" * , / : ; < = > ? \ ` |); control characters, internal spaces,
a no-break space and unicode are accepted; leading/trailing whitespace
(space, tab, NBSP) is refused. `_CUSTOM_KEY_FORBIDDEN` is now that set,
the internal-NBSP refusal (wrong: measured accepted) is gone, and the
validator / tool docstrings state the measured rule instead of a closed
enumeration that was false.
A delete (`{key: None}`) is exempt from the AddCustomInfo syntax rules:
RemoveCustomByKey never validates syntax (measured: 'Key not found', never
'Invalid key'), and 2b9791f ran the check before the None branch, so a key
an ezdxf script wrote ('A=B', ' PAD ') showed in drawing_properties_get and
could never be removed. The line-break rule still applies both ways.
Also measured: custom keys are case-insensitive in AutoCAD (AddCustomInfo
over an existing case-variant is 'Duplicate key'; SetCustomByKey and
RemoveCustomByKey match either spelling and keep the stored one). The COM
routing was case-sensitive, so `{'PROJECT': ...}` over 'Project' went to
AddCustomInfo and failed mid-write -- the same class. Both engines now
match existing keys casefolded (update in place under the stored spelling,
never a second tag), and a request naming two case-variants is refused.
Tests: parametrized validator sweep over all thirteen characters, the
accepted set (control chars, NBSP, unicode, the other printables), the
delete exemption headlessly on a DXF carrying such keys and on the fake
SummaryInfo, case-variant refusal, and case-insensitive routing against a
fake that raises 'Duplicate key' / 'Key not found' like AutoCAD. Confirmed
live through the real ComBackend on a scratch document (Close(False)).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Three review findings against SECTION 19 on the live engine, each measured
on AutoCAD 2026 in a scratch document with the operator's BACKGROUNDPLOT=2:
- plot_style_list read Preferences.Files.PrintStyleSheetPath; the ActiveX
member is PrinterStyleSheetPath, so the AttributeError was swallowed and
every row came back installed=None. Renamed in the backend, the server
docstring and the test fake (which faked the same wrong name). Live: 13
rows, all 9 catalogue ctb files installed, four .stb files as installed.
- ComBackend.drawing_export_pdf returned ok before any file existed under
background plotting, so batch_plot died on path.stat() with an unhandled
FileNotFoundError and a later foreground plot raised E_FAIL. The export
now sets BACKGROUNDPLOT=0 around PlotToFile (restored after), honours the
method's bool and reports ok only with the file on disk (bytes included).
batch_plot turns a backend RuntimeError or a phantom ok into a per-row
ok:false, keeping the rows already plotted.
- With a sheet current, the Model row was that sheet plotted again: the COM
export switched tabs only when a layout was named. layout=None now makes
Model current (restoring the tab), and batch_plot names every layout,
Model included, so both engines plot the tab the row is labelled with.
Live: Model row /Title (Model) at 210x297 beside the A3 sheet, the active
tab and BACKGROUNDPLOT restored.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Measured on AutoCAD 2026: under a UCS at (100,50) rotated 90 deg, a pick on a
circle at WCS (105,70) came back from IAcadUtility.GetEntity as (20,-5,0),
while Utility.GetPoint already answered in WCS. A model doing ucs_set ->
user_select -> entity_create_* at `picked` would place geometry at a silently
wrong position. The point goes through Utility.TranslateCoordinates(acUCS,
acWorld) packed as a VT_ARRAY|VT_R8 VARIANT (the plain tuple GetEntity hands
back is refused as "Invalid argument Point"). The fake Utility now models the
UCS frame and the VARIANT requirement; a new test pins the measured figures
and checks GetPoint stays untranslated. Docstrings state WCS.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Three header-only-write / half-write classes in drawing_properties_set:
1. Measured: ezdxf emits $CUSTOMPROPERTYTAG / $CUSTOMPROPERTY only after
$LASTSAVEDBY, which does not exist before R2004, so on an R12 (AC1009) or
R2000 (AC1015) document the write reported ok, drawing_properties_get
echoed it from memory, and drawing_save_as (version kept) wrote nothing --
the class f3ff703 removed for CANNOSCALE. The headless engine now refuses
with a ValueError naming the DXF version and "save as R2004 or newer",
before custom_vars is touched; the dwgprops capability reason no longer
claims custom_properties_supported unconditionally.
2. A line break in a custom key or value passed validation, ezdxf wrote it
unescaped, and the saved DXF failed to reopen (DXFStructureError) -- the
whole drawing lost, reported as success. Refused by name in the shared
validator.
3. Measured on AutoCAD 2026: AddCustomInfo rejects keys with leading/trailing
whitespace and keys containing '=', ';' or a no-break space as 'Invalid
key' -- mid-write, after the summary and earlier keys were applied, as an
unnamed COM error -- while the headless engine wrote them. The shared
validator now mirrors those rules, so both engines refuse before writing
(internal spaces, tabs, unicode and 300-char keys stay accepted, as
AutoCAD accepts them).
Pinned by save+reopen tests on R12/R2000 (refused, file reads back empty),
R2004 (round-trips), the newline case (refused, the file still opens), and
the fake-SummaryInfo COM test (no ActiveX call reaches SummaryInfo).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
user_pick_point / user_select answer {cancelled: true} on ESC (DISP_E_EXCEPTION)
and {timed_out: true} past COM_CALL_TIMEOUT; preferences_set refuses read-only,
unknown and out-of-range keys before any ActiveX call.
The read-only key is Files.PrinterStyleSheetPath, not the spec's
PrintStyleSheetPath: IAcadPreferencesFiles has no member of that name
(measured live on AutoCAD 2026 / R25.1), and a misspelt key would make
preferences_get() raise on every live call.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Summary fields are refused headlessly with capability dwgprops before any
write; custom properties are $CUSTOMPROPERTYTAG/$CUSTOMPROPERTY pairs and
survive save + reopen. Validation is shared, by name, and never str()-coerces.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Four review findings, all measured by the reviewer on AutoCAD 2026:
1. ucs_list and the ucs_restore('world') CMDACTIVE guard read
app.GetVariable, but GetVariable is an AcadDocument member — the tool
was dead live and the guard's swallowed read forced cmd_active to 0,
sending `_.UCS _W` into any open prompt. Both read the document now,
and a failed CMDACTIVE read refuses instead of proceeding. The fake
app in tests/test_views_ucs.py has no GetVariable any more, so the
old code cannot pass.
2. view_named_save defaulted from doc.ActiveViewport.Center/Height/Width,
which does not track the display (it answered the initial view after
`_.ZOOM _C 5,6 20`). The current view is VIEWCTR / VIEWSIZE at the
SCREENSIZE aspect — what `-VIEW _S` records (width 40.267 for height
20). The fake viewport is deliberately stale so a read of it fails.
3. view_named_restore wrote Center/Height/Width into the AcadViewport;
AutoCAD anchors the lower-left corner and widens to the display
aspect, landing a 10x20 view at (5, 6) on VIEWCTR (20.134, 6). It now
zooms the saved rectangle (app.ZoomWindow), which centres and fits
like `-VIEW _R` (VIEWCTR = saved centre, VIEWSIZE = max(h, w/aspect)),
reports `applied: "zoom_window"` and reads VIEWCTR / VIEWSIZE back.
Headless the same reconciliation moved the centre whenever the
*Active VPORT's aspect was rewritten from w/h (even the 1.34 default
opened at x = 11.734): the aspect the file carries is left alone —
it is the display's, written by AutoCAD at save — and the window is
fitted into it; the payload adds `vport_height` / `aspect_ratio`.
4. layer_state_restore set ActiveLayer before the loop and outside the
try; AutoCAD refuses to make a frozen layer current, so the spec's
own save → freeze → restore path raised an opaque COM error with
nothing applied. When `frozen` is being restored the state's current
layer is thawed first; the write is wrapped and a refusal lands in
`warnings`. The fake document and layer now model both refusals.
Live AutoCAD was not running in this round (GetActiveObject failed, no
acad process), so the fix is measured against the reviewer's numbers,
not re-measured.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
_num let NaN/inf (and a 400-digit int, as OverflowError) through, so an
INSERT was placed at [nan, 0] and the refusal, when it came, named the
line instead of equipment[0].x. run_spec caught Exception only, so a
CancelledError mid-run left the placed symbols inside an open transaction
(an open undo mark on COM). Finite check in _num; except BaseException.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
base_x/base_y were only float()-cast, so a NaN base point was written into
the BLOCK record; a primitive on a layer the drawing lacks was written as a
dangling reference doc.audit() never flags (and on COM would fail mid-loop
after Blocks.Add). validate_base_point names the key; the layer table is
probed before the first write and the missing names are refused, or created
and reported as layers_created when create_layers=true (new optional kwarg,
contract + both engines + tool).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
block_insert and block_set_attributes applied str() to whatever arrived, so
a JSON null became the text None and a non-mapping failed after the INSERT
was written. validate_attribute_values (backends/block_specs.py) runs first
on both engines: strings pass the one-line rule, ints and finite floats are
written as plain digits, everything else is a TypeError naming the tag.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Headless text_find_replace matched and wrote only dxf.text of an ATTRIB/ATTDEF, so on a multi-line attribute it reported replaced: 1 while block_get_attributes and block_explode still carried the old embedded MTEXT (and a needle on the second line was never found). The ATTRIB/ATTDEF branch now reads through _attrib_value and writes through _write_attrib_value, the same pair block_get_attributes / block_set_attributes use.
COM block_explode swallowed a failing GetAttributes() (attrs = ()), GetConstantAttributes() and Invisible, then exploded, deleted every ATTDEF placeholder and the reference and returned ok: True with no attribute text -- every value destroyed silently on a transient RPC_E_CALL_REJECTED. Those reads now happen before Explode() and propagate with nothing written; a failure after the explode deletes the members it added and the TEXTs written so far and leaves the reference in place (_undo_explode), so the drawing is never left half-burst under an exception. The fakes gain the members a live AcadBlockReference / AcadAttributeDefinition always expose (GetConstantAttributes, Constant, Invisible) instead of relying on the swallow.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Three authored claims in SYSVAR_CATALOG were false against the engines:
- HPANG said "degrees" but ActiveX GetVariable/SetVariable (and AutoLISP
getvar) hold radians - measured on AutoCAD 2026 in a scratch document:
SetVariable(pi/4) reads back 0.7853981633974483 on both paths. The row
now says radians, like POLARANG.
- ANGBASE said "radians" with both engines True, but the DXF header stores
$ANGBASE in degrees (AutoCAD saved the 1.5708-radian seat value as 90.0)
and ezdxf read/wrote it raw, so the two engines disagreed by a factor of
57.3. EzdxfBackend now translates that header variable at its boundary
(_HEADER_DEGREE_SYSVARS): the tool speaks radians on both engines, the
file keeps degrees.
- OSMODE claimed engines.ezdxf True, but $OSMODE is an R12-only header
variable ezdxf never exports for R2000+: a headless write reported
ok: True and read back None after save + reopen. It is registry-saved
in AutoCAD, so it joins _UNSAVED_SYSVARS (refused with
capability: registry_sysvar; the facade's `osmode` key refuses and
snapshots None headlessly, like polar / polar_angle). Headless reads of
every registry-saved variable now report None instead of whatever the
ezdxf template holds in memory.
The gate that should have caught all three, tests/test_sysvar_catalog.py's
default round-trip, wrote 56 no-ops out of 66 and never saved: it now
writes a value that differs from the fresh document's for every writable
ezdxf-True entry, saves, reopens and reads back from the file. Two new
tests pin OSMODE's refusal and ANGBASE's radians-at-the-tool /
degrees-in-the-file split.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
An unnamed UCS (UCS Origin / 3P without saving, the common kind) has an
empty UCSNAME exactly like WCS does, so both engines answered
`current: world` while the drawing was not in WCS — verified live on
AutoCAD 2026 (`_.UCS _O 10,10,0` → UCSNAME="" WORLDUCS=0) and on the DXF
it writes ($UCSNAME='' $UCSORG=(0,20,0)). A silent wrong value.
- COM: a named match still wins; otherwise WORLDUCS (AutoCAD's own answer)
decides, and WORLDUCS=0 appends a `name: None` row built from
UCSORG/UCSXDIR/UCSYDIR.
- ezdxf: the same rule against $UCSORG/$UCSXDIR/$UCSYDIR via the new
`engineering.environment.ucs.is_world_axes`; a stale $UCSNAME falls back
to the frame instead of leaving no row current.
- Server `ucs_list` result: `current` is null for an unnamed UCS (never
`world`), plus `current_unnamed: bool` so null is unambiguous.
- Tests: helper, headless (unnamed row, stale name, and the exact AutoCAD
DXF over the wire), and COM fake reading WORLDUCS + the frame variables.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two review findings on the headless engine, both content lost with ok: True.
Multi-line attribute writer: `block_set_attributes` set only `attrib.dxf.text`,
so after an edit `block_get_attributes` reported the new value while
`block_explode` (`_burst_attrib`) burst the embedded MTEXT at its pre-edit
content -- and on the default R2010 document, where ezdxf exports no embedded
MTEXT, a save/reload carried the new value the exploded drawing never showed.
`_write_attrib_value` now rebuilds the embedded MTEXT from its own virtual
entity with the new content (`virtual_mtext_entity()` + `set_mtext(...,
graphic_properties=False)`, the round trip ezdxf's `BaseAttrib.transform`
uses), keeping placement, style and height; `_attrib_value` reports the
embedded MTEXT's full `Line1\PLine2` content for a multi-line attribute, as
AutoCAD's `TextString` does, so get / set / explode / COM agree.
Opaque members: `block_explode` iterated `virtual_entities()` without a
`skipped_entity_callback`, so ezdxf dropped every member it cannot copy
(OLE2FRAME) or transform (VIEWPORT) with a debug log, an ACAD_PROXY_ENTITY
without proxy graphics contributed nothing, and the reference was then deleted.
`_explodable_members` materializes the list before any write and refuses by
member with the typed capability `explode_opaque_members` (declared on both
engines: headless False with the reason, COM native), naming the block and
the live way out. The block_explode docstrings (backend and tool) now state
this refusal instead of claiming the xref/MINSERT gate covered everything.
Tests: eight new headless cases in tests/test_track_a_hardening.py -- the
multi-line reader, the rewrite (value on every surface, placement unchanged,
clean audit), a `\P` value and the empty value, an R2010 save/reload, the
single-line path unchanged, the opaque-member refusal (nothing written,
reference alive, members named), an ordinary block still exploding under a
uniform scale, and the capability declared on both engines.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
90 authored rows (type, range/enum, default, meaning, saved-in, per-engine
support, friendly key); every ezdxf claim is checked against the real
backend and the registry-saved set is pinned to what the backend refuses.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
A multi-line ATTRIB keeps its content in an embedded MTEXT; dxf.text is only
the first line (ezdxf) or "Line1\PLine2" (AutoCAD), so the TEXT the explode
emitted silently dropped lines or rendered literal \P with a clean audit.
ezdxf: `_burst_attrib` adds `virtual_mtext_entity()` (graphic properties and
WCS placement already carried; the reference matrix applied for a constant
ATTDEF) and marks it invisible like the ATTRIB. COM: `_capture_attrib` reads
`MTextAttribute` / `MTextAttributeContent` / `MTextBoundaryWidth` and
`_add_mtext_from_capture` goes through `AddMText` (height, style, frame,
then Rotation, then the attachment mapped from the ATTRIB's Alignment).
Two INSERT kinds `virtual_entities()` cannot explode were destroyed with
ok: True: an xref (no virtual entities, reference deleted) and a MINSERT
(only the first cell resolved, the rest of the grid gone). Both are now
refused by name before any write, on both engines (`block_record.is_xref`
/ `mcount > 1` headless; `Blocks.Item(Name).IsXRef` / `AcDbMInsertBlock`
live, the latter previously failing the INSERT check with the misleading
"not a block reference").
Tests: nine new cases in tests/test_track_a_hardening.py (headless multi-line
ATTRIB and constant ATTDEF, xref and MINSERT refusals, a single-cell grid
that still explodes; COM multi-line capture, frame-before-angle, and both
named refusals). The fake ActiveX surface gains AddMText and IsXRef.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Measured: an R12 (AC1009) document has no OBJECTS section, so ezdxf exports
neither AcDbVariableDictionary/DICTIONARYVAR nor the seeded SCALE objects, and
drawing_save_as keeps AC1009. `_set_annotation_scale` reported `ok: True,
changed 1:1 -> 1:50` and the file reloaded as 1:1 -- the header-only write
that vanishes on reload, the class this task exists to remove, and a breach
of the backend's own R12 honesty convention (viewport_set_scale / lock).
The write is now refused with a ValueError naming R12 and "save as R2000 or
newer", after parse_scale (a malformed value is still named as such) and
before either dictionary is touched, so a refused call leaves the root
dictionary as it found it and drawing_settings still applies the sibling keys
(limits / grid / ortho survive R12). The refusal is listed with the others in
the contract and server docstrings. Pinned by two tests that save, reopen and
read the R12 file back.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
COM: ``text.Normal`` was a plain Python tuple, which ActiveX marshals as
VT_ARRAY|VT_VARIANT and refuses with E_INVALIDARG (verified live on
AutoCAD 2026); because the write came after Explode(), the ATTDEF deletes
and AddText, the tool raised and left the drawing torn. It now goes
through ``_apoint`` like every other point write, and the fake ActiveX
surface refuses a bare tuple on Normal/InsertionPoint/TextAlignmentPoint
so a test cannot pin the wrong call shape again.
COM: every AcDbAttributeDefinition Explode() returned was deleted, but
GetAttributes() excludes constant attributes, so a constant attribute's
only visible text was destroyed with ok: True. A constant ATTDEF from the
explode (Constant member, or its tag in GetConstantAttributes()) is now
captured like an ATTRIB and replaced by a TEXT; placeholders are still
just deleted.
ezdxf: an AutoCAD-authored reference carries no ATTRIB for a constant
attribute and virtual_entities() skips ATTDEF, so the same text vanished
headlessly. A constant ATTDEF whose tag has no attached ATTRIB becomes a
TEXT transformed by the reference matrix, the path add_auto_attribs takes,
and is not converted twice when block_insert did attach one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
An ezdxf-authored drawing has no ACAD_SCALELIST entries, and
`_ensure_scale_entry` appended only the requested scale. AutoCAD repopulates
its default list only when the dictionary is *empty*, so the saved file
opened with a one-entry scale list and `SetVariable("CANNOSCALE", "1:1")`
failed with `Error setting system variable` -- the annotation scale could
no longer be changed in AutoCAD, while the tool reported `ok: True` and the
test pinned the degraded state (`len(keys) == 1`).
An empty list is now seeded with AutoCAD's own default metric list before
the requested scale is considered: the 17 entries a fresh AutoCAD 2026
drawing carries (`Documents.Add()` saved as DXF, MEASUREMENT 1), in that
order and under AutoCAD's own keys A0 ... A9, B0 ... B6. New entries take
the next key in that sequence (`_scale_list_key`) instead of being keyed by
their name; presence is still decided by group 300, so a non-empty
AutoCAD-authored list is never re-seeded or duplicated. Verified live: the
headless file now opens in AutoCAD 2026 with the 17 keys, CANNOSCALE 1:50
current, and switching to 1:1 and 1:100 works.
Tests: the fresh-drawing test asserts the seeded names and keys, that
setting 1:50 appends nothing (it is a default), that 1:25 lands under B7
once, and that the list survives save + reopen with 1:1 present; a new test
pins that *reading* the annotation scale creates nothing (the read side
stays pure, AutoCAD fills an empty list itself); the AutoCAD-keyed list test
now expects the A3 key. The `drawing_settings` docstring says what each
engine does and that AutoCAD refuses the live write on a paper-space layout
with no active viewport (measured).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Layer states are ACADMCP_LAYERSTATES XRECORD chunks (<= 255 ASCII chars each),
in the file and not in AutoCAD's Layer States Manager. Headless view restore
writes the *Active VPORT (ezdxf's header has no $VIEWCTR; measured). UCS is
stored and made current; tool coordinates stay WCS.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two silent wrong-place defects in the BURST path. An ATTRIB is an OCS
entity, so the TEXT that replaces it now carries extrusion/thickness with
insert/align_point; a mirrored reference (ATTRIB reflected to (0,0,-1),
INSERT +Z with yscale=-1) put the tag 50 units across the mirror axis with
a clean audit. Members and TEXTs now go into the INSERT's owner layout
(ezdxf get_layout, COM ObjectIdToObject(OwnerID)) instead of the current
space: a sheet title block exploded while Model was current duplicated
geometry into model space and then died on delete_entity headless, and on
COM landed the tag text in model space with ok: True. A reference nested
in a block definition is refused before any write on both engines.
Five regression tests (mirrored INSERT, sheet-owned INSERT with Model
current, nested INSERT, and the COM owner-block / nested-refusal call
shapes) fail on the previous commit and pass here.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
virtual_entities() yields geometry only, so an exploded tagged symbol lost
its tag value silently. Every attached ATTRIB now becomes a TEXT at the
same WCS placement/height/rotation/style/layer (invisible stays
invisible), reported as attribute_texts. COM reads GetAttributes before
Explode, deletes the ATTDEF placeholders Explode returns, AddText per
value, and deletes the reference ActiveX Explode leaves behind.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
EnvironmentContract carries every member of the track E interface; the two
drawing_properties_* members are @capability('dwgprops') in this worktree only
and become @abstractmethod when group C's implementations merge.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Headlessly, grid/snap are stored on the active VPORT, CANNOSCALE in
AcDbVariableDictionary (+ an ACAD_SCALELIST entry), and LIMMIN/LIMMAX on
the model-space layout as well as the header — measured: the header alone
is overwritten at save. Registry-saved variables (AUTOSNAP, POLARANG, …)
are refused with capability registry_sysvar instead of vanishing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Track A's task-1 gate covered block_insert only; the sibling tool still
returned a handle for a typo'd name that doc.audit() later deleted, and
both tools accepted *Model_Space (a reference cycle). One gate per engine
(_require_block / _require_block_defined) is now shared by both placing
tools: non-string name -> TypeError, unknown -> ValueError naming it,
layout block -> ValueError, all before add_blockref / InsertBlock.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
TOOL_PACKS=all (default) | comma list of core,pid. core is everything not
claimed by another pack and can never be dropped; unknown entries are
ignored with a warning. Pack hiding composes with TOOL_PROFILE=lean (the
lean set now carries pid_symbol_insert / pid_line_draw / pid_graph, 50
tools) and ENABLE_3D. system_about reports {enabled, available, ignored};
cad_batch's unknown_tool rejection names the TOOL_PACKS gate.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Closes the four verified BLOCKING findings on pid_graph.
1. scope="all" attached across layouts: the port grid, bbox candidates,
vertex grid, junctions and text lookup were pooled from every space.
The grid is now keyed by (space, cell) and every lookup filters by the
edge's space; junctions carry `space`.
2. A mirrored INSERT (extrusion -Z, as MIRROR3D / foreign DXFs store it)
got its catalogue ports on the unmirrored image at 1.0. Both engines
report `mirrored` on INSERT properties (ezdxf: extrusion z < 0; COM:
Normal z < 0; default False); transform_port takes `mirrored` and
applies x -> -x about the WCS insertion point after rotation/scale,
direction (180 - d) mod 360 — cross-checked against Insert.matrix44.
resolve_endpoint passes it through too, so draw_line starts on the
mirror image as well.
3. The text-tag fallback searched a full circle around the box top, so a
line label or note below the symbol beat the tag above it. Candidates
must now sit at or above top - height/2 (spec §9.2 step 6), nearest
wins, and line-number texts are never equipment tags.
4. A non-uniform INSERT scale re-ran the transform with the X factor and
set `inferred` (reserved for foreign-block ports). transform_port
gains `strict=False` for the reader: point ports scale per axis
exactly; a radial port keeps min(sx, sy)·r and the node drops to 0.6
with notes ["non-uniform scale"]. Node dicts gain `y_scale`,
`mirrored` and `notes` (default []).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
