77db39804acf26a9e601e9a8c5b6e8c0c1f742f2
249
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Umut CANandClaude Opus 5
|
c607e75b75 |
fix(task-10): ensure annotation layers live, and put the weld symbols and their dimensions where ISO 2553 puts them
Three blocking review findings in engineering/mech/annotate.py.
1. draw_annotation_prims assigned ROLE_LAYER[role] without creating the
layer. EzdxfBackend._apply_attrs adds a missing layer; ActiveX does not.
MEASURED live on AutoCAD 2026 (probe: GetActiveObject, Documents.Add(),
doc.Close(False) in finally): on a scratch document whose layer table is
['0'], draw_surface_texture(ComBackend(), at=(0,0), ra=3.2,
machining='required', lay='perpendicular', allowance=0.5) raised
"AutoCAD COM error (-0x7ffdfff7)" and left one orphan AcDbLine on layer 0
— a partial write with no rollback, on exactly the foreign-drawing path
the spec names (drawing_open runs no bootstrap). The same probe after the
fix: {'ok': True, count 6, 'layers_created': ['DIM','TEXT']}, model space
['AcDbLine' x4 on DIM, 'AcDbText' x2 on TEXT], layer table ['0','DIM',
'TEXT']. New helper ensure_annotation_layers() creates every target layer
up front, before the first entity, with its ENGINEERING_LAYERS colour /
linetype / lineweight; the result reports layers_created.
2. side='both' drew the two elementary symbols 0.4h apart — the other-side
one still stood on the (correctly omitted) identification line, so a
double-V butt weld came out as two detached halves that were not even
symmetric about the reference line. ISO 2553 places them back-to-back on
the continuous reference line: the other-side baseline is now 0.0 when
there is no identification line. tests/test_mech_annotate.py asserted the
wrong apex (-0.4*h), so the gate certified the defect; that test is
rewritten to assert the mirror pair, plus a double-fillet case.
3. For side='other' the size and length were written above the reference
line while the symbol hung below the identification line — 'a6' sat where
an arrow-side throat dimension sits, on a joint with no arrow-side weld.
Both texts now sit beside their own symbol (0.25h clear of the line it
stands on, on the symbol's side). New test covers side='other' with size
and length, and pins arrow/both unchanged.
All five new or rewritten tests fail against the pre-fix module (the layer
one with the measured 'Key not found' refusal, via a fake that models only
that measured behaviour) and pass after. tests/test_mech_annotate.py: 29
passed. Full suite: 3326 passed, 6 pre-existing failures unrelated to this
change (verified identical on the branch tip with the change stashed),
test_release_consistency.py::test_document_numbers_match_the_tree
deselected as instructed. No tool registration changed, so
docs/tool-inventory.json regenerates byte-identical.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
ac6c4075ba |
feat(task-3): the feature catalogue and its standards tables
engineering/mech/features.py is the nineteen typed features of spec section 5,
each answering the same four questions - is my placement legal, what do I
contribute to this view, to a cut face, and what dimension do I want - plus the
five structural hooks the view engine needs: removal_box, radial_edit,
corner_edit, outline_edit and omission. Pure arithmetic; a test asserts emitted
primitive tuples, not a screenshot.
Nothing restates a table the repository already owns: Keyway takes its width
and depth from engineering.keyway (DIN 6885-1) and is refused by name outside
that table's bore range; GearTeeth takes its outline from engineering.gear's
involute generator and is refused when its tip diameter disagrees with the
segment it sits on.
standards/threads.py transcribes ISO 261 Table 1 and Table 2 - first-choice
M1.6-M64 plus second-choice M14/M18/M22/M27/M33/M39/M45/M52/M60 - and computes
ISO 724's basic minor and pitch diameters from ISO 68-1's own formula, pinned
against the published values (M20x2.5 -> 17.294 / 18.376). The remaining
second-choice diameters, every third-choice diameter and fine pitches below M8
are not transcribed and are refused by name, never interpolated. The drawing
rules are ISO 6410: minor at 0.8 x major, a thread-length limit line across the
major, a three-quarter circle in the end view, and an internal thread whose
section hatch runs to the major diameter.
standards/{undercuts,rings,centres,orings}.py ship DIN 509, DIN 471/472,
DIN 332-1 and ISO 3601-2 with their SOURCE, their row-key contract and an
**empty** row set. That is deliberate and is the track's table rule taken at its
word: a row that could not be verified against the standard is not shipped,
because a wrong relief depth or groove diameter is a wrong workshop drawing
while a narrow table is merely narrow. Every lookup is refused by name and says
what to transcribe and where; the features accept explicit dimensions so the
geometry is fully exercised, and DIN 332 form R is refused outright rather than
approximated by the straight 60 degree cone of forms A and B. Filling any of
these tables later is a data edit with no code change, and a shape test already
fails any row that lands without a column the drawing code reads.
Three deviations from the plan text, each measured rather than assumed
(the merge agent should keep exactly one copy of the first):
1. standards/__init__.py (Task 1, on main) refused a registration with no rows
("registered no rows"), which would have made the four not-transcribed
tables impossible to register at all - and registering them is what keeps a
later transcription a data edit. register() now refuses a rows argument that
is not a dict and accepts an empty one; two tests in tests/test_mech_standards.py
pin both halves. No existing test asserted the old refusal.
2. ORingGroove's housing kind is carried by `housing`, not `kind`. A dataclass
field named `kind` overwrites the discriminator _Base.to_dict() writes:
measured, Probe(id='og').to_dict() == {'kind': 'radial', 'id': 'og'}, so
feature_from_dict would then refuse its own payload as an unknown feature
kind and no part carrying an O-ring groove could round-trip through XDATA.
A new test pins the round trip.
3. The plan's end-chamfer test asserted after == (75.0, 10.0) - the corner
itself - and before == (72.0, 8.268), a point on neither surface. The real
edit is before (72.0, 10.0) on the cylinder and after (75.0, 8.268) on the
end face, consistent with the 45-degree start chamfer the same file pins.
The test was corrected to the measured geometry; the behaviour is unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
6024723d6b |
fix(task-8): pin every transcribed standards row, not a sampled subset
The module docstring claimed "every value asserted here is a named row of a named table", but the converse did not hold: 27 of the 83 shipped rows had a dimension no test compared against a literal. ISO 4014/4017 M5 (s,k), ISO 4032 M5 (m), ISO 7089 M5 (d1,d2,h), ISO 4762 M4/M6/M10/M16 (dk,s,b) and D/B for 20 of the 33 ISO 15 bearings were constrained only by inequality tests (series growth) and by the bore-number rule - never by the transcribed number. For a task whose worst failure is "a standards table row that is not in the standard", those rows were exactly where such a row would hide. Measured before the fix with a pytest plugin that rewrote five rows in memory (M5 hex bolt s=k=99, M5 nut, M5 washer, M16 socket screw dk=s=b=99, 6307 as 78x20 instead of 80x21): 32 passed in 0.07s. All five now fail. Each of the five tables is pinned by an ISO*_ROWS dict literal carrying every dimension of every shipped size, parametrized one case per size/designation, plus a completeness test asserting the table's key set equals the literal's - so a row added later without a pin is red too (verified: a fabricated M14 head and 6011 bearing fail the completeness gate). 32 -> 93 tests, 0.06 -> 0.13 s. No production code changed; no ActiveX member is involved, so no live probe was required for this finding. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
56e6ff7206 |
feat(sheet): ISO 5457 frames and ISO 7200 title blocks for A4-A0
SECTION 24 opens with sheet_frame and titleblock_apply. engineering/sheet/frames.py transcribes ISO 216's trimmed sizes, ISO 5457's 20 mm filing margin and 10 mm edges, the grid reference system (an even number of divisions per side, that side of the frame over 50 mm; letters from the top, numbers from the left), the centring marks (trimmed edge to 5 mm inside the frame) and the 10 x 5 mm corner trimming marks. Every one of those numbers is pinned by a test against the clause it comes from, because a wrong margin is visible on every drawing this server makes. engineering/sheet/titleblock.py draws the ISO 7200 block -- 180 mm wide, which is exactly the drawing-space width of a portrait A4, which is why one block fits every size -- and carries the ISO 128-30 projection-angle symbol. Which symbol is which is derived rather than remembered: first-angle projection puts the view seen from the left on the right, and the view of the cone from its small end is the small circle inside the large one, so first angle draws the cone left and the circles right. The old A3 module folds in. apply_iso_a3_titleblock now forwards to apply_titleblock(size="A3", projection=None, zones=False, marks=False), which is the geometry it always drew, and tests/test_engineering_titleblock.py passes unchanged -- that is the regression gate for the fold. No new ActiveX member is called: both tools reach the drawing only through contract members the A3 title block has used on both engines since v1.0 (entity_create_polyline / _line / _circle / _text, layout_list, layout_set_current), so there was nothing to probe live. Declared, not glossed: the zone divisions drawn here are equal, so ISO 5457's allowance for shorter corner fields is not implemented; the division counts, which are what a zone reference quotes, are the standard's. ISO 7200's full optional-field list is not transcribed, only the fields this block has a cell for. Coverage is A4-A0; an unknown size is refused by name with the five it has. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
a4ce46ba9b |
feat(mech): SECTION 23 opens with surface_texture and weld_symbol
ISO 1302:2002's seven transcribed symbol-proportion rows (text height -> line width d', short-leg height H1, minimum height H2) drive the 60 deg vee, the machining-required bar at H1, the machining-prohibited circle inscribed in the vee, and the all-around circle at the kink; the Ra/Rz values, the process, the lay symbol and the machining allowance land around the extension line, which grows with the widest of them. A text height outside the seven rows is refused by name rather than interpolated, and ISO 1302 is accepted as an alias designation for drawings still issued under it - the graphical symbol is the same one. ISO 2553:2019's reference line, dashed identification line (omitted for a symmetrical weld, as the standard permits), size written before the symbol, length and pitch written after it, field-weld flag, all-around circle and process tail. Six elementary symbols are transcribed - square, single-V, single-bevel, single-U, single-J, fillet. The rest of the elementary table is deliberately not shipped: a weld kind outside the six is refused with the list of the six, because a guessed weld symbol is a wrong instruction to a welder. Both tools place the symbol on a plain leader - a line plus an arrowhead with the proportions the backend's own mleader already draws - rather than through leader_create_mleader, which refuses empty text and would hang an MTEXT label off every symbol. Proportions neither standard dimensions (the all-around circles, the flag, the identification line's dashes, the text pitch and the character width estimate) are named constants documented as this implementation's declared choices, never as transcribed values. No new ActiveX member is called: both tools compose LINE / ARC / CIRCLE / LWPOLYLINE / TEXT through the entity-creation contracts both engines already implement, so no live COM probe was needed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
49b972f007 |
feat(task-8): ISO fastener and ISO 15 bearing tables, transcribed and pinned
engineering/mech/standards/fasteners.py carries ISO 4014:2011 / ISO 4017:2014 head dimensions (s, k), ISO 4032:2012 nut heights, ISO 7089:2000 washer d1/d2/h and ISO 4762:2004 socket head cap screws, plus the ISO 261:1998 coarse pitch column. bearings.py carries the ISO 15:2017 deep groove boundary dimensions for 6000-6010, 6200-6210 and 6300-6310. Only the ISO 261 first-choice sizes ship. M14/M18/M22/M27/M33, everything above M36 (above M24 for ISO 4762), the 618x/619x/16xx bearing series, bore numbers above 10 and every suffixed bearing variant are refused by name rather than interpolated: a narrow table is merely narrow, a wrong row ships a wrong workshop drawing. Across-corners e is derived geometry (2s/sqrt(3)), so no e column had to be transcribed at all, and the ISO 8826-1 cross and ISO 8826-2 element-symbol fractions are declared drawing conventions, not table values. No ActiveX member is called by this task, so no live AutoCAD probe was needed; the two modules are pure tables and pure arithmetic. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
04d269318a |
feat(task-2): the mechanical part model - RevolvedPart, PrismaticPart, build_part
engineering/mech/part.py is the model the whole track draws from: a revolved stack of segments along +X, or a closed prismatic outline plus a thickness, each carrying a list of typed features. Pure arithmetic - no backend, no async, no DXF - which is what lets the view engine be tested without a drawing. Every refusal fires before anything is drawn and names the offending path the way pid_from_spec does: a non-finite or non-positive number as segments[2].d_outer, a bore that is not smaller than its outside (a bore that changes diameter is two segments), an outline with fewer than three distinct vertices, an outline that crosses itself (engineering.measure.is_self_intersecting - the shoelace cancels crossed lobes rather than failing, so a bowtie would otherwise measure 0.0), an unknown material, an unknown segment key, a duplicate feature id. Two gates are the reason this is a model rather than a dict: a feature whose placement is off the part is refused by its own name and by the range it missed, and two features that would remove the same material are refused with both names and the overlapping box. Neither is clamped. part_to_dict round-trips through build_part, which is what lets mech_part_draw write the model onto the drawing as ACADMCP_MECH XDATA and mech_view_add read it back months later without the caller re-describing the part. Two fixes to the plan's own code and test list, both recorded in deviations: _features_from imported engineering.mech.features unconditionally, so a featureless part - every fixture in this module, and both round-trips - died on ModuleNotFoundError until Task 3 lands; the import now happens only when there is a feature dict to build. And the plan's test file omitted test_a_duplicate_feature_id_is_refused while its own gate deselects it by name, so the duplicate-id refusal the commit message claims went unpinned; the test is written here and Task 3 turns it green. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
2bb8044144 |
feat(mech): shared foundation - primitives, XDATA codec, standards registry, ISO 128-50 materials
engineering/mech/ opens with the four modules every track-B/G branch imports, so the four worktrees can be cut from this commit and none of them has to invent a name the others will conflict with. - primitives.py: the typed descriptions the pure modules emit (Line, Arc, Circle, Poly, HatchArea, Text, DimIntent) with bbox / translate / rotate / scale, and ROLE_LAYER - the one place an ISO 128 line role becomes a layer name, so no module hardcodes a layer. The arc bbox sweeps its quadrants: a 0-180 arc reports y=+r, not its endpoints, which is what keeps the view layout from stacking two views on top of each other. - xdata.py: the ACADMCP_MECH codec in Track A's shape - a 1001 application marker, 1000 chunks of at most 255 ASCII characters, the 16 KB per-entity ceiling enforced before anything is written, and a foreign application, a corrupt chunk stream, a wrong version or an unknown kind refused with ValueError instead of decoded into something plausible. - standards/__init__.py: the table registry. A size outside the coverage is refused against the coverage; a size inside it that is not a listed row is refused against the rows. Nothing is interpolated, an ambiguous variant is never resolved by taking the first row, and a registration whose SOURCE does not name the table it was transcribed from is refused. - standards/materials.py: the section-hatch map for nine materials. ISO 128-50 standardises only the general hatching (narrow continuous lines at 45 degrees) - that is acadiso.pat ANSI31 and what engineering/gear.py already draws for steel. The distinguishing symbols are ASME Y14.2M's section lining as shipped in AutoCAD 2026's acadiso.pat, read off the installed file; cast iron's departure from ASME and the absence of any mechanical symbol for concrete and wood are stated in the rows themselves. Angles are 0.0 because the patterns already carry 45 degrees, and the two architectural patterns' scales are derived from the ANSI31 line spacing and recomputed by the test rather than chosen. No tool is registered here. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
a8482a5f0d |
docs(spec): align tracks B+G with the written plan
The five gaps the plan's reconciliation found, each resolved in the spec: part placement lives in draw_part(at=, rotation=) so the dataclasses carry no origin; engineering/sheet/refs.py is gone with the contract correction; image_attach takes no clip and titleblock_apply no position (the ISO 7200 corner is fixed by the standard) — both recorded as out of 1.6; balloon_add places one balloon per call against the item numbers bom_extract already assigned. Records the four feature tables that ship empty (DIN 509, DIN 471/472, DIN 332-1, ISO 3601-2): no row could be verified against the standard here, so the structure, the row-key contract and the refusal ship without rows, and the features draw from explicit dimensions until the tables are transcribed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
5497dc01d9 |
docs(plan): tracks B+G — 16 TDD tasks in five groups
Assembles the skeleton and the five drafted parts into one plan, Task 1 through Task 16, each a TDD task with its failing test, its implementation and its gate. Groups: - (main) Task 1 — primitives, the ACADMCP_MECH codec, the standards registry and the ISO 128-50 material map; the shared foundation the four branches all consume. - M (Tasks 2-7) — the part model, the feature catalogue with its DIN/ISO tables, the view engine (orthographic, then sections and details), dimensioning, and SECTION 21's six tools. - S (Tasks 8-9) — the ISO 4014/4017/4032/7089/4762 and ISO 15 tables, and SECTION 22's three tools. - A (Tasks 10-11) — ISO 21920-1 surface texture, ISO 2553 welds, centre marks, the ISO 128-40 cutting-plane line and the material hatch: SECTION 23's five tools. - G (Tasks 12-14) — ISO 5457 frames and ISO 7200 title blocks A4-A0, revisions, the ISO 7573 parts list and ISO 6433 balloons, xrefs, images, data extract and DWG: SECTION 24's eleven tools and the four contract members. - F (Tasks 15-16) — the six mech_* critique focuses, the mech pack, lean, aliases and golden queries; then the v5 benchmark, the correctness checks, the live COM smoke and the docs. Interface pass over the assembled file: View.dims is tuple[DimIntent, ...] as the skeleton pins it; every XDATA writer calls Task 1's to_values rather than re-deriving the chunk split from encode; stdparts' five standard features are STD_FEATURE_KINDS so they do not collide with features.FEATURE_KINDS; the revision block carries its own ACADMCP_SHEET_REV application instead of a fourth ACADMCP_MECH kind that the pinned KINDS would refuse; and Task 16 states 39 correctness checks, which is what it registers. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
c97be8fc40 |
docs(plan): tracks B+G skeleton — 16 tasks in five groups, interfaces pinned
The header, global constraints, file structure, the interface block every task builds against, the group/ownership table and the merge notes. Task sections are drafted next. Also corrects the spec's architecture section: the engineering tools compose the generic contract members the way gear/keyway/titleblock already do, so only four operations (xref_attach, xref_manage, image_attach, drawing_export_dwg) need contract members and an implementation per engine. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
5ff66b641f |
docs: tracks B+G (mechanical 2D and the sheet standard) design spec
One part model — a revolved or prismatic profile plus typed features — and one view engine that projects it into front/side/section/detail views with hidden lines, cut faces and dimensions, instead of a generator per part shape. Around it: the standard-parts catalogue as code inserted as blocks with attributes, the ISO annotation symbols, and the sheet standard (ISO 5457 frames A4-A0, ISO 7200 title blocks, revisions, ISO 7573 parts list, balloons, xrefs, DWG). 25 tools in four sections, new pack `mech`, three capability keys, six mech_* critique focuses, benchmark task `mech_assembly` and six correctness checks. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
39e6e2f9e4 |
docs(settings): track E shipped — CLAUDE.md sections 18-20, README, changelog with the live COM smoke record
CLAUDE.md gains items 18-20 (styles, page setup & templates, environment), the grown drawing_settings facade on item 11, lean 55 / 52 and TOOL_PACKS=all|core,pid,settings, and three conventions: layer states are ours (ACADMCP_LAYERSTATES XRECORD, mode "xrecord"), page-setup evidence is the PDF's own /MediaBox, nothing interprets coordinates in UCS. README token table re-measured on this tree with benchmarks/token_suite.py (ratio/v1 estimates): full 199 tools / 59,315 tokens, core,settings 190 / 55,593, core 168 / 48,825, lean 55 / 16,360, search 2 / 356; corpus re-derived from discovery.aliases: 186 AutoCAD command names, 933 synonym phrases, 204 tools. Styles & standards row, page setup & templates row, final environment wording, and "Known limitations of the settings track". CHANGELOG Unreleased: the track E intro, Added (styles, page setup & templates, environment, drawing_settings growth, benchmark evidence), Fixed (the Track A hardening list), Changed (three groups, packs, measured idle cost, release snapshot 204 · 8 · 5 · 3284). Spec status: implemented. Where the plan's text and the tree disagreed, the tree wins: mleaderstyle_create is implemented on both engines through the ACAD_MLEADERSTYLE dictionary and no `mleaderstyle` capability key exists (spec §4, capability maps), so the docs say so instead of calling it ezdxf-only; the Task 7 fix (tolerant ACADMCP_PID payloads, crossings tested against the arc) joins the hardening list the plan left it out of. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
18c7c69da6 |
fix(task-25): page_setup_truth and settings_pdf_mediabox_a3 move the sheet to ANSI B before proving A3
A fresh Layout1 is already ISO A3 landscape (ezdxf R2018 default: 420 x 297, plot_rotation 0), so an A3-only /MediaBox read-back passed with page_setup_apply stubbed to a no-op: the A/B gate row and the v4 matrix task could not fail on the setter. Both now apply ANSI B (432 x 279, a size no fresh document has; spec section 9 names it) and read that PDF first, then apply ISO A3, read its PDF, and require the setter's changed.size_mm to have moved from B to A3. The stub fails at the first PDF. The moved-sheet comparison is +/-0.5 mm, the spec's tolerance, not exact: measured live on AutoCAD 2026 (scratch Documents.Add(), closed unsaved), the COM engine reports ANSI B as 431.8 x 279.4 and the DWG To PDF.pc3 file's MediaBox as 431.8 x 279.4 then 420.158 x 297.039 for A3; the task passes there with changed.size_mm [[431.8, 279.4], [420.0, 297.0]]. Headless it is [[432.0, 279.0], [420.0, 297.0]]. tests/test_benchmark_v4.py gains the mutation test the finding describes (setter stubbed -> both rows must fail; both passed on the old code) and a run of the gate row itself; the headless task test asserts the B stage. README rows and the tasks_v4 docstring say what the task now does; the README collected-tests figure follows the two new tests (3282 -> 3284). The regenerated A/B report against v1.5.1 is byte-identical (26 -> 32/32). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
c2942d3c94 |
bench: matrix v4 adds page_setup_truth; correctness suite grows to 32 with three settings checks (A/B vs v1.5.1: 26 -> 32 / 32)
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
02dbb133b5 |
feat(settings): live COM smoke on AutoCAD 2026 builds the five .dwt twins and records the run
scripts/smoke_settings_com.py --build-dwt exited 0 on AutoCAD 2026 (25.1s), 2026-09-22: five templates/*.dwt written through drawing_template_save (SaveAs code 66, each file opens with AC1032), page setup plotted and the PDF's own /MediaBox read back as 420.158 x 297.039 mm, iso_a3_mech.dwt reopened as source "bundled" with ISO-25 current, layer state / named view / UCS / preferences / SummaryInfo / prompt line all through the COM engine. The record is in CHANGELOG.md under Unreleased. The smoke keeps a ledger of the documents it opens and closes them on the way out, so a failed run never leaves scratch documents on the operator's seat. Two of its expectations were corrected to the merged tree: mleaderstyle_create is implemented on COM (spec: no `mleaderstyle` key), and plot_style_list marks catalogue rows with `installed`. --interactive was not run unattended on the shared seat (an unanswered GetPoint holds the command line); Task 23 measured the pick live. *.dwt / *.dwg are binary in .gitattributes; AutoCAD's plot.log is ignored. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
b54271f4ac |
fix(com): four live defects the settings smoke measured on AutoCAD 2026 — rejected calls after a document switch, typelib spelling of color/Lineweight, narrowed layer-state dictionary, layer 0 Freeze put
Measured 2026-09-22 by scripts/smoke_settings_com.py --build-dwt against the running AutoCAD 2026 (25.1s), each on a scratch Documents.Add() document: 1. RPC_E_CALL_REJECTED (-2147418111) on Documents.Count straight after Documents.Open, after Close(False) inside document_close, and in _ensure_document_state: AutoCAD's own message filter refuses incoming calls while it is still switching documents. pywin32 exposes no CoRegisterMessageFilter, so _wait_out_rejected_call waits the window out for read-only callables (0.25 s -> 1 s pauses, 20 s budget, inside COM_CALL_TIMEOUT) at those sites and after Documents.Add/Open; any other com_error is not retried. 2. layer_list raised "'IAcadLayer' object has no attribute 'Color'. Did you mean: 'color'?": acax25enu.tlb spells IAcadEntity/IAcadLayer `color` and `Lineweight`. Late-bound dispatch resolved .Color/.LineWeight case-insensitively; with a makepy cache present (this machine's gen_py was regenerated on 2026-09-17, and every object a method returns is then a generated wrapper) the lookup is exact. All 17 sites now use the typelib spelling, which works on both wrappers; the fakes model the measured names. 3. layer_state_restore raised "'IAcadObject' object has no attribute 'Count'": Dictionaries.Item and IAcadDictionary.Item are declared IAcadObject* (the narrowing _com_unnarrow already handles for MLEADER styles). The save path went through the typed Dictionaries.Add, so only the reopen paths failed. Both now un-narrow; the fakes narrow like pywin32. 4. The Freeze put on layer 0 raises 'Invalid layer' whatever the value, even False while thawed (color/Linetype/Lineweight/Plottable/LayerOn/Lock/ ActiveLayer all fine on it), so a state saved with 0 current restored with two warnings and 0 unapplied. Freeze is written only when it changes the layer. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
0514f8f15d |
chore(templates): rebuild the five bundled DXFs on the merged tree (styles via dimstyle_create/textstyle_create, iso_a1_arch annotation scale 1:50)
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
d072df9fd4 |
fix(task-24a): apply_standard decides each unit write on a read taken after the dimension style switch
|
||
|
Umut CANandClaude Opus 5
|
f7528b2fa5 |
fix(com): every system variable is read and written on the ActiveX document, not the Application
AcadApplication has no GetVariable/SetVariable members; they live on
AcadDocument. Measured on the running AutoCAD 2026 (25.1s, 2026-09-22,
scratch Documents.Add(), Close(False)):
hasattr(app, 'GetVariable') -> False
hasattr(app, 'SetVariable') -> False
app.GetVariable('INSUNITS') -> AttributeError: ... IAcadApplication
instance ... has no attribute 'GetVariable'
doc.GetVariable('INSUNITS') -> 4
doc.GetVariable('MEASUREMENT') -> 1
doc.GetVariable('FILEDIA') -> 1; doc.SetVariable('FILEDIA', 0) -> None,
reads back 0, restored to 1
doc.GetVariable('AUDITCTL') -> 0, 'CMDACTIVE' -> 0, 'USERS1' -> ''
Fifteen call sites in backends/com_backend.py still went through the
Application inside `try/except ... log.debug`, so on a live seat they
silently degraded: MEASUREMENT defaulted every seat to metric,
drawing_info reported units from a failed INSUNITS read, drawing_audit
never set AUDITCTL, the CMDACTIVE guards of system_run_command /
system_run_lisp never fired and run_lisp never read USERS1 back. All are
rerouted through `_acad_doc()`; the try/except stays only where an
optional read is defaulted (INSUNITS -> "Unknown", AUDITCTL absent on a
host that lacks it, USERS1 after the expression ran) and the log line
says so.
Linetype loading, measured the same way: `SendCommand("_-LINETYPE _LOAD
CENTER acadiso.lin\n\n")` loads nothing with FILEDIA=0 and leaves the
command at `Enter an option [?/Create/Load/Set]:` (LASTPROMPT), which
makes the whole seat answer RPC_E_CALL_REJECTED to every client until
ESC is pressed; with FILEDIA=1 it opens the modal "Select Linetype File"
dialog. `doc.Linetypes.Load("CENTER", "acadiso.lin")` returns None and
the table grows 3 -> 4; a repeat raises 'Duplicate record name', an
unknown name 'Undefined linetype', a missing file 'File system error'.
`_ensure_linetype_loaded` and `linetype_load` now call `Linetypes.Load`
(MEASUREMENT still read on the document to pick the .lin), touch no
FILEDIA, and report a failure with the English excepinfo description.
`apply_standard` reads every variable it will write before the first
style is created, so a read the engine refuses is a refusal with nothing
written (it used to fail after ISO-25 / ISOCP were created and current).
Fakes: every application fake refuses GetVariable/SetVariable
(tests/test_styles.py's COM fixture carried them on the Application,
enshrining the wrong shape); the members exist on document fakes only.
Regression tests per rerouted site: linetype load via Linetypes.Load with
MEASUREMENT on the document, drawing_info units from the document,
AUDITCTL set/restored on the document, CMDACTIVE/USERS1 on the document,
apply_standard refusing before any write.
Live end-to-end with the real ComBackend on a scratch document:
apply_standard('iso') -> INSUNITS 4, ISO-25 (already in acadiso.dwt,
created: false) and ISOCP (created: true) current, second call created:
false / changed: {}; linetype_load('CENTER') -> Linetypes 3 -> 4, FILEDIA
stays 1, repeat already_loaded, 'NOSUCHLT' refused by name;
_ensure_linetype_loaded('HIDDEN') -> 3 -> 4; drawing_info units 'mm';
drawing_audit AUDITCTL 0 -> 0; system_run_command ok;
system_run_lisp('(+ 40 2)') -> '42'.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
70afd57831 |
feat(server): settings pack — 22 environment tools behind TOOL_PACKS, lean grows to 55, three groups, golden set +10
Task 24 (merge sanity) on main after the five track E groups merged.
- TOOL_PACK_NAMES = ("core", "pid", "settings"); PACK_TOOL_NAMES["settings"]
is exactly the 22 SECTION 20 tools. Styles and page setup stay in core.
- LEAN_TOOL_NAMES += page_setup_apply, batch_plot (53 -> 55).
- _GROUP_TAG_PRIORITY / _GROUP_TAG_LABELS: "style" moved up next to "pid",
"pagesetup" -> page_setup and "environment" -> environment added; the 28
SECTION 19/20 decorators gain their section tag, so _tool_groups() reports
styles 10 / page_setup 6 / environment 22 (23 groups, 204 tools) and
pack == group == section for the settings pack.
- SECTION headers, backends/base.py composition, contracts/__init__.py
exports and the layer_states feature entry were already correct after the
merge (read and confirmed, nothing edited).
- Pack text: config.py, .env.example, README config row; README <sub> line
204 tools in 23 groups; release snapshot 3259 collected tests (measured).
- docs/tool-inventory.json regenerated; registry snapshot re-derived.
- tests: test_tool_packs.py replaced (11 tests), test_capability_contract.py
+3 (composition, the agreed capability flags, layer_states honesty),
golden set +10 tuning cases (81 = 66 tuning + 15 holdout); all ten route
in the top 3 without alias edits.
Deviation from the plan text: TRACK_E_KEYS carries five keys, not six. The
plan's "mleaderstyle" (ezdxf True / com False) contradicts spec §8.1, which
retracted that key because the ActiveX route exists (§4.2); measured on the
tree: capability_keys() == {boundary_trace, chspace, interactive_prompt,
live_application, preferences, revcloud, wipeout}, and
ComBackend.mleaderstyle_create is a native implementation
(backends/com_backend.py:6752, is_capability_default -> False). The test now
also asserts the key is absent.
No new ActiveX call was written in this task, so no live probe was needed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
90c1194f7f |
merge: track-e group V
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
8e05b5e8eb |
merge: track-e group P
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
3278586c6e |
merge: track-e group C
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
0a581a8da3 |
merge: track-e group S
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
6b3477081c |
merge: track-e group H
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
d313da783a |
docs(analysis): Track A review backlog — every minor finding with a disposition
Waves 1-4 of the Track A review produced ~170 minor findings that lived only in the orchestrator's scratchpad. Filed de-duplicated, one line each: fixed-in-task-N (this track's hardening tasks), fixed-in-track-A (with the commit), accepted-limitation (with the reason) or deferred-1.7. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
efcc8bbba1 |
fix(task-7): crossings test the exact arc, so a line through a jump's apex counts
flatten_bulges chops a semicircle into an even number of chords (36 for r=50, 12 for r=5), so a flattened vertex lands exactly on the apex — the axis of symmetry, the one place a P&ID line most plausibly meets a crossing jump. segments_cross treats a vertex hit as a junction, so both neighbouring chords dropped it and the arc contributed 0: the (45,0)->(55,0) bulge -1 jump reported crossings 0 at x=50 and 1 at x=50.3 or x=49, the plan's own (0,0)->(100,0) semicircle 0 at x=50, and the mirrored frame (extrusion -Z) 0 at x=-50. count_crossings now takes bulges= (per-chain DXF bulge lists, zero-padded) and tests every bulged edge as its exact arc through the new segment_arc_crossings — circle/segment intersection restricted to the sweep — with the same junction rule as the straight case: a hit within _EPS of the segment's ends, of the arc's own two ends, or a tangent, is not a crossing. Nothing along the sweep is a vertex any more. The arc parametrisation is factored into _arc_of_bulge and shared with flatten_bulges, which keeps its promised signature and its ezdxf pin but no longer feeds the crossing count. draw_line passes the vertices and bulges through unflattened. Pinned in tests: the apex case on the semicircle (x=50, y 20->60), the r=5 jump at x=50 / 50.3 / 49 on +Z and -Z frames, the junction cases (T-touch on the arc, through the arc's endpoint, chord side, tangent along the apex, in-and-out at y=4.9 counts 2), and 4x400 seeded random segment/arc pairs against ezdxf's ConstructionArc.intersect_line (a 20 000-case run in the worktree found 0 mismatches). The eight new assertions fail on the flattened rule and pass on the exact one. Headless finding, headless evidence; no new ActiveX call was written, so the shared live AutoCAD was not touched. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
d3ef7b45a2 |
feat(discovery): style golden queries; dimstyle/textstyle set_current and drawing_apply_standard join the lean profile
Five tuning cases for the styles surface (DDIM, the ISO-25 set-current paraphrase, the one-call drafting-standard paraphrase, the isocp text style, and the dimstyle counting question) — measured against the live catalog every one ranks top-1, so no alias vocabulary changed. The docstring count moves to seventy-one (56 tuning + 15 holdout); the holdout set is untouched. Lean decision (spec §8.2): dimstyle_set_current, textstyle_set_current and drawing_apply_standard join LEAN_TOOL_NAMES (50 -> 53); the seven authoring/list tools stay full-only and all ten stay in core (no pack claims them). Pinned by the new profile test in tests/test_styles.py, written async like the rest of that module (its module-wide asyncio mark warns on a sync test). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
9cb4bee587 |
fix(pid): existing line payloads are read tolerantly and crossings follow arcs, not chords
A foreign or hand-edited ACADMCP_PID payload (from: 'garbage', seq: True) made the next pid_line_draw raise TypeError; payload_port_refs / payload_seq now accept only well-formed values and a reader result never raises. An existing polyline with a bulge was tested as its chord, so a line through the arc reported crossings 0; flatten_bulges (pure, pinned against ezdxf.math's flattening) feeds count_crossings on both engines. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
a5d166f365 |
feat(styles): drawing_apply_standard — ISO or ANSI styles, units and layers in one idempotent call
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
b458923e19 |
feat(templates): drawing_template_save on both engines — dwt_write is a declared capability
Live AutoCAD writes a real .dwt through SaveAs(path, ac2018_Template = 66) and puts the description into the summary Comments; headlessly a .dxf template is written through drawing_save_as and a .dwt request is refused with capability dwt_write, naming the DXF route and the COM route. drawing_save_as's "dwt" entry was 5 (acR13_dxf): a DWT request wrote an R13 DXF under a .dwt name. Probed live on AutoCAD 2026 (typelib: ac2018_Template = 66, acR13_dxf = 5, acTemplateDwg absent; the saved file starts AC1032, the document is rebound, Comments takes). SECTION 19 is now 6 tools; SAVEAS joins SHARED_ACAD_COMMANDS; templates/README.md documents the two files per template. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
cfb5d5082c |
fix(task-6): the reader no longer hands a signal line the neighbouring pipe's label
pid_graph step 5 ran the TEXT label fallback for every edge without a
number. Once signal lines stopped carrying a fabricated number (
|
||
|
Umut CANandClaude Opus 5
|
021a4eb43d |
fix(task-11): dimensions_using_style is one filtered selection set, not a per-entity COM walk
_com_dimensions_using walked every entity of every layout and, since the un-narrowing fix, re-dispatched each one through a dynamic proxy before reading ObjectName (~8-10 ms per entity), which put dimstyle_modify past the 60 s COM_CALL_TIMEOUT on a ~6k-entity drawing after its SetVariable + CopyFrom had already landed. It is now a single SelectionSet.Select(acSelectionSetAll, (0 . "DIMENSION") (3 . <style>)), which answers from AutoCAD's own index whatever the drawing size. Measured live (AutoCAD 2026, scratch doc, 1000 LINEs + 14 dimensions across model and paper space): walk 12.7-15.8 s, selection 0.02-0.09 s, identical handle sets; the whole dimstyle_modify tool now returns in 0.07 s. The group-3 filter value is a wcmatch pattern, so the style name is backtick-escaped (_wcmatch_literal): unescaped, "A.B" also selected the dimensions of "A_B", "N#1" those of "N21", "P[1]" those of "P1", "S@X" those of "SAX" (measured). Handles are returned in ascending handle order, Select failures propagate, and the selection set is deleted either way. tests/test_styles.py: the fake document carries a SelectionSets that emulates ssget "X" over every layout with wcmatch-literal semantics and narrowed IAcadEntity items, refusing an unescaped wildcard; three tests cover no-per-entity-read, escaping, and cleanup-on-failure. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
17f7228fd6 |
fix(task-19): a .dxf template really reaches the live seat; the fallback dimvars land on Standard
Documents.Add(<file>) accepts only a genuine DWT. Measured on AutoCAD 2026: Add(templates/iso_a3_pid.dxf) returned the default acadiso drawing (layers ['0'], Layout1/Layout2) exactly as Add() and Add(<missing.dwt>) did, so drawing_new(template=<bundled name>) reported ok:true with source 'bundled_dxf' over a blank document, and the explicit .dxf path route was just as blank. ComBackend.drawing_new now converts any non-.dwt template through AutoCAD itself (Documents.Open read-only -> SaveAs ac2018_Template, older constants tried next -> Close(False)), caches the .dwt in the temp folder keyed on path/size/mtime, hands Add the .dwt, and refuses a missing template file instead of letting Add default silently. The tool result carries template.dwt / template.dwt_cached. Re-measured end to end through server.drawing_new on the real ComBackend: ansi_b_mech -> 11 layers, tab B, DIMTAD 0 / DIMTIH 1 / DIMEXO 1.5; iso_a3_pid -> 17 layers, tab A3, second call reuses the cached .dwt (0.8 s conversion once). Fake-ActiveX tests pin the call shape and that the conversion document never stays open. Headlessly the build's fallback wrote spec 4.1 only as header DIM variables, and the renderer folds six of them, so DIMTAD/TIH/TOH/EXE/EXO/GAP/LUNIT/LWD were a no-op: ansi_b_mech dimensioned with ISO text placement while system_get_variable and AutoCAD said ANSI. The fallback now also stores each value on the Standard dimstyle; the five DXFs are rebuilt (--check passes) and a test reads the effective values off a DIMENSION drawn from each template and asserts header and style agree. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
3c0babfef1 |
fix(pid): signal lines carry no fabricated number; a bubble exits towards the first waypoint
An ISA-5.1 signal line has no pipe line number, yet every pneumatic / electric line got the bare sequence as its number and a label, and ate a process sequence number. Signal classes now leave line_number None (a verbatim one is still honoured), seq None, no label. A radial port aimed at the far end even with waypoints, so the first segment cut through the bubble; aim_points (lines.py) aims at the first/last waypoint for both draw_line and the dry run. Merge note: benchmarks/adapters/autocad_mcp_pro.py (final group's file) had its two _task_pid_roundtrip assertion lines moved to the new truth — the signal row is unnumbered, the connector row is 3. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
03a5067d83 |
fix(task-11): live text styles write TrueType by typeface, refuse missing fonts and arrowhead blocks before any write, un-narrow the dimension walker
Four review findings against the COM styles block, all measured on AutoCAD 2026
(scratch documents from Documents.Add, closed without saving):
1. textstyle_create: `TextStyle.fontFile = "arial.ttf"` raises 'Filer error' for
every bare TrueType name (bundled presets included) after TextStyles.Add has
run, leaving a stub with an empty font that a retry meets as "already exists";
a full path is accepted but the STYLE record then carries the machine path.
`SetFont("Arial", bold, italic, 0, 0)` — the STYLE dialog's own route — stores
the clean `arial.ttf`. The font is now located before Add (`_com_locate_font`:
support path, then the Windows font folders), a TrueType is written by the
family/subfamily read from its `name` table (`_truetype_face`), an SHX by the
name given, an unlocatable file is refused with nothing written, and a write
ActiveX still refuses after Add deletes the entry it added.
2. _ensure_com_textstyle goes through the same helper, so DIMTXSTY / text_style
ARIAL and ISOCPEUR are created on the first call with a real font instead of
failing once and then silently binding a fontless style.
3. dimstyle_create / dimstyle_modify check a user DIMBLK/DIMBLK1/DIMBLK2 against
doc.Blocks before any write (`_com_require_arrowhead_blocks`, the headless
`_require_arrowhead_blocks` twin, same message and table-spelling rewrite);
a write that fails after DimStyles.Add restores the previous ActiveDimStyle
(discarding the unsaved overrides) and deletes the half-made style and any
preset text style the call created.
4. _com_dimensions_using un-narrows each `Layouts.Item(i).Block.Item(p)` —
declared IAcadEntity*, so `.StyleName` raised AttributeError under a makepy
cache and the blanket except reported `[]` — and swallows nothing.
The fake in tests/test_styles.py now models the measured ActiveX rules (bare
TrueType fontFile refused, SetFont by installed typeface, SetVariable refusing an
unknown arrowhead, IAcadEntity narrowing on block items, Delete) so the old code
cannot pass; nine tests cover the four findings. SECTION 18 docstrings state the
live engine's refusal rule for fonts and the pre-write arrowhead check.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
dda11755cf |
fix(task-16): custom keys follow AutoCAD's simple case compare, and on COM AutoCAD routes the write
|
||
|
Umut CANandClaude Opus 5
|
a76d9e08a3 |
feat(templates): five bundled templates built by the server's own tools; drawing_new(template=name)
SECTION 19 grows to five tools with drawing_template_list; drawing_new takes a
bundled name (iso_a3_mech, iso_a1_arch, iso_a3_pid, ansi_b_mech, ansi_d_arch)
or a .dwt/.dxf path and reports template: {name|path, path, source}.
scripts/build_templates.py builds templates/*.dxf through EzdxfBackend
(layer set, header DIM variables until group S's styles land, drawing_settings,
sheet tab, ISO 5457 frame on A3, page_setup_apply) and --check pins them
reproducible. One drift the plan's same-process measurement could not see is
fixed at the source rather than masked: ezdxf orders CLASSES by set iteration,
so two processes disagreed on LAYOUT / ACDBPLACEHOLDER; the section is re-keyed
(required list first, then by name) before the save.
The root .gitignore ignores *.dxf as generated output; templates/*.dxf is
un-ignored there, since the bundled set is the one DXF that is committed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
86c5d6ad65 |
fix(task-18): the headless Model plot is doc.modelspace(), not the current tab
EzdxfBackend.drawing_export_pdf routed layout=None / layout="Model" through _msp(), which follows the current tab, so with a sheet current the "Model" PDF was that sheet's paper-space content with no refusal — the same defect finding 3 named on COM, still live on the headless engine. Measured: circle in model space, 390x270 rectangle on an A3 sheet, sheet current — the Model row's /MediaBox was 176.1x121.9 mm (the rectangle) instead of 121.9x121.9 (the circle). The model target is now doc.modelspace() whichever tab is current, on both entry points. The test that vouched for this only asserted the row's shape (paper is None, true by construction). It is replaced by two tests that prove content: the Model row's mediabox with a sheet current equals the one with Model current and carries the circle's square aspect, and drawing_export_pdf(path) with no layout does the same. Both fail without the backend change. plot.py's docstring now says which engine does what. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
2e101b95e2 |
fix(task-5): a rollback that fails after a cancellation no longer kills the session, and the COM rollback goes back to an UNDO Mark instead of prompting
Two review findings on
|
||
|
Umut CANandClaude Opus 5
|
a60f801205 |
feat(server): SECTION 18 styles — dimstyle/textstyle/mleaderstyle tools with DIMSTYLE/STYLE/MLEADERSTYLE aliases
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
4fe2d963c0 |
fix(task-16): custom keys mirror AutoCAD's full AddCustomInfo rule, deletes are exempt, keys match case-insensitively
The |
||
|
Umut CANandClaude Opus 5
|
f6951e2597 |
fix(task-18): the COM plot is foreground, by layout name, and confirmed on disk; plot_style_list reads PrinterStyleSheetPath
Three review findings against SECTION 19 on the live engine, each measured on AutoCAD 2026 in a scratch document with the operator's BACKGROUNDPLOT=2: - plot_style_list read Preferences.Files.PrintStyleSheetPath; the ActiveX member is PrinterStyleSheetPath, so the AttributeError was swallowed and every row came back installed=None. Renamed in the backend, the server docstring and the test fake (which faked the same wrong name). Live: 13 rows, all 9 catalogue ctb files installed, four .stb files as installed. - ComBackend.drawing_export_pdf returned ok before any file existed under background plotting, so batch_plot died on path.stat() with an unhandled FileNotFoundError and a later foreground plot raised E_FAIL. The export now sets BACKGROUNDPLOT=0 around PlotToFile (restored after), honours the method's bool and reports ok only with the file on disk (bytes included). batch_plot turns a backend RuntimeError or a phantom ok into a per-row ok:false, keeping the rows already plotted. - With a sheet current, the Model row was that sheet plotted again: the COM export switched tabs only when a layout was named. layout=None now makes Model current (restoring the tab), and batch_plot names every layout, Model included, so both engines plot the tab the row is labelled with. Live: Model row /Title (Model) at 210x297 beside the A3 sheet, the active tab and BACKGROUNDPLOT restored. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
2052915f34 |
fix(task-23): user_select reports the picked point in WCS — GetEntity answers in the current UCS, so translate acUCS→acWorld before returning
Measured on AutoCAD 2026: under a UCS at (100,50) rotated 90 deg, a pick on a circle at WCS (105,70) came back from IAcadUtility.GetEntity as (20,-5,0), while Utility.GetPoint already answered in WCS. A model doing ucs_set -> user_select -> entity_create_* at `picked` would place geometry at a silently wrong position. The point goes through Utility.TranslateCoordinates(acUCS, acWorld) packed as a VT_ARRAY|VT_R8 VARIANT (the plain tuple GetEntity hands back is refused as "Invalid argument Point"). The fake Utility now models the UCS frame and the VARIANT requirement; a new test pins the measured figures and checks GetPoint stays untranslated. Docstrings state WCS. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
266b6fb838 |
fix(task-10): un-narrow the ACAD_MLEADERSTYLE dictionary route so mleaderstyle_list/create work on the live engine
acax25enu.tlb declares IAcadDictionaries.Item, IAcadDictionary.Item and IAcadDictionary.AddObject as returning IAcadObject*. With a makepy cache for the AutoCAD type library present (it is, on any machine where gencache ever ran against AutoCAD), pywin32 wraps each result in the gen_py class of the declared type, which exposes only IAcadObject members: .Count/.Item/.GetName on the dictionary and .ArrowSize/.LandingGap/.TextHeight/.TextStyle on a style all raised AttributeError, so the previous round's removal of the @capability refusal turned a typed UnsupportedCapabilityError into a raw AttributeError on AutoCAD 2026. `_com_unnarrow` re-dispatches an object on its raw IDispatch through win32com.client.dynamic.Dispatch (no gencache side effect, unlike CastTo), and the dictionary route applies it to the dictionary, to every Item(i) and to the AddObject result. Verified live on AutoCAD 2026 (scratch document, closed afterwards): list reads Standard = 0.18/0.09/0.18/Standard, create writes ISO-LDR = 2.5/1.0/2.5/ISOCP, the duplicate is refused, and an independent late-bound read of the dictionary agrees. The fake in tests/test_styles.py now models the narrowing: Dictionaries.Item, Dictionary.Item and Dictionary.AddObject hand back a wrapper that answers only IAcadObject members and raises on everything else (reads and writes alike) until unwrapped through _oleobj_. Five COM tests fail against the previous backend and pass now; a new test pins the missing-dictionary path (Dictionaries.Add before AddObject). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
2b9791fbcd |
fix(task-16): custom properties refuse pre-R2004 headlessly, line breaks, and AutoCAD's invalid keys before any write
Three header-only-write / half-write classes in drawing_properties_set:
1. Measured: ezdxf emits $CUSTOMPROPERTYTAG / $CUSTOMPROPERTY only after
$LASTSAVEDBY, which does not exist before R2004, so on an R12 (AC1009) or
R2000 (AC1015) document the write reported ok, drawing_properties_get
echoed it from memory, and drawing_save_as (version kept) wrote nothing --
the class
|
||
|
Umut CANandClaude Opus 5
|
f25421709f |
feat(pagesetup): SECTION 19 — page_setup_list/apply, plot_style_list, batch_plot with /MediaBox read-back
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
b83a74e969 |
feat(environment): system_launch, preference whitelist and operator prompts on COM; declared refusals headlessly
user_pick_point / user_select answer {cancelled: true} on ESC (DISP_E_EXCEPTION)
and {timed_out: true} past COM_CALL_TIMEOUT; preferences_set refuses read-only,
unknown and out-of-range keys before any ActiveX call.
The read-only key is Files.PrinterStyleSheetPath, not the spec's
PrintStyleSheetPath: IAcadPreferencesFiles has no member of that name
(measured live on AutoCAD 2026 / R25.1), and a misspelt key would make
preferences_get() raise on every live call.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
32821c6410 |
fix(task-5): pid_from_spec shields its rollback so a real client cancellation rolls the sheet back on both engines
The MCP SDK cancels a request by cancelling an anyio scope, and anyio cancellation is level-triggered: task.cancel() is re-issued on every loop iteration while the task is inside the cancelled scope. run_spec's `except BaseException: await backend.transaction_rollback()` was therefore cancelled at its first await, before the rollback body ran. Measured through the real transport (fastmcp.Client + notifications/cancelled): five symbols left in an open transaction on ezdxf; on the COM shape EndUndoMark / _UNDO B never sent while the backend's `finally` already cleared _transaction_active, so the next transaction_begin nested a StartUndoMark. A native Task.cancel() (what the plan's Step-4 note reasoned about) is delivered once and clears, which is why raising CancelledError from a mock passed trivially. The rollback now runs inside anyio.CancelScope(shield=True). The COM hard timeout (asyncio.wait_for inside ComBackend._run) still fires inside the shield, measured at 0.62 s with a 0.5 s deadline, so a hung rollback cannot freeze the server. Tests: the mock-raise test is replaced by real cancellations that fail on the unshielded code — a cancelled anyio task-group scope (parametrized alongside the native Task.cancel() case), the real transport via Client.cancel(request id) polled mid-run, and the COM shape (real ComBackend._run, a real single-thread executor and the real transaction_rollback over a recording ActiveX document, with a call in flight when the scope is cancelled) which asserts StartUndoMark, EndUndoMark, _UNDO B land and the next begin is fresh. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |