1cc9043d7044956e728ca5babcf866b8bd93d2fa
78
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 grigory
|
1cc9043d70 |
port: наш оверлей 1.5.1 → апстрим 1.6.0 (ветка ours-1.6)
Перенос нашей дельты (10 изменённых + 2 новых файла) с v1.5.1 на тег v1.6.0 трёхсторонним слиянием с ветвью ours-1.5 (v1.5.1 + /opt/data/autocad-mcp-build/patch). Файлы 1.6.0 не перезаписывались копированием: 30 конфликтов разрешены по смыслу. Что перенесено (наше, чего в 1.6.0 не было): - инструменты: titleblock_apply_gost_form3, file_put, file_get, drawing_open_base64, drawing_save_base64, entity_create_attdef, block_get_attdefs, textstyle_ensure, text_apply_style, text_style_report, dimstyle_ensure, layout_set_paper (+ таблица алиасов и регистрация в server.py); - параметр `layout` (адресация в пространство листа) — 36 инструментов, включая геометрию (line/polyline/circle/arc/...), block_insert/block_create_from_entities, dimension_* и аннотацию; в COM-бэкенде этому служит _activate_layout(); - `inline_font` (ГОСТ-шрифт ISOCPEUR прямо в содержимое MTEXT/таблиц) — 5 инструментов; - ГОСТ-стиль по умолчанию (_ensure_default_text_style, DEFAULT_TEXT_STYLE=GOST_A) при drawing_new/drawing_open; - ATTDEF → ATTRIB: block_insert создаёт именованную вставку (не анонимный *U-блок), block_set_attributes достраивает отсутствующие ATTRIB из определений блока; - отчётность block_insert/block_set_attributes: filled / unknown_tags / created_tags и штамп стиля на ATTRIB (mark_style, attr_style); - PDF: page_size («layout» — страница равна формату листа 1:1, «extents» — по содержимому), настоящий текстовый слой (pdf.fonttype=42 + отрисовка текста поверх геометрии, включая текст через видовые экраны) и предупреждения о нечитаемо мелких надписях; - engineering/gost_titleblock.py (основная надпись по ГОСТ Р 21.1101-2013, форма 3) и _fonts/isocpeur.ttf. Что взято у 1.6.0 (наши дубли заменены, чтобы не спорить с апстримом): - drawing_export_pdf: рамка листа считается его _paper_frame() (масштаб, plot area, поворот, поля) вместо нашей _layout_paper_mm(); наш текстовый слой и page_size наложены сверху; - размерные стили: _current_dimstyle_name() вместо нашего _current_dimstyle() (наш хелпер оставлен — им пользуется отчёт о стилях); - таблицы (ezdxf и COM): объединённая строка-заголовок, «span», масштабируемый отступ ячеек и SetCellTextHeight() из 1.6.0 + наш inline_font/style; - block_insert: структура вставки и обработка многострочных ATTRIB из 1.6.0 + наша отчётность и штамп стиля; - экспорт DWG/xref/image_attach/профили, группы arch/pid/mech/sheet/understand — сохранены целиком. Три структурные правки после слияния (git сшил код механически, найдены pyflakes и аудитом дерева): - com_backend: наша подпись drawing_export_pdf попала в тело xref_attach и дублировала метод; вставка убрана, паритетные text_layer/page_size перенесены в настоящую COM-функцию; - _space_name в ezdxf-бэкенде был занят дважды (нашин и 1.6.0): наш переименован в _reply_space_name, иначе он затенял хелпер апстрима; - entity_create_text: ключ "style" в dxfattribs стоял дважды (наш оставлен). Прод :30015 не затронут. |
||
|
grigory
|
2e2a2b96a9 |
ours: наш оверлей к апстриму 1.5.1 (дельта для переноса в 1.6.0)
10 изменённых файлов + 2 новых (engineering/gost_titleblock.py, _fonts/isocpeur.ttf). Ветка-донор для трёхстороннего переноса в ours-1.6. |
||
 Umut CANandClaude Opus 5.5
|
0abbe55041 |
bench: matrix v6 adds arch_roundtrip; four architectural correctness checks; the live arch smoke
The evidence for track F, in the shape tracks A, E and B + G used. - benchmarks/tasks_v6.py: 19 tasks, DEFAULT_MATRIX = "v6"; v5 to v2 stay addressable. arch_roundtrip draws the example plan with arch_plan_from_spec and reads it back without the spec: rooms_detect must find each labelled room within 0.1 % of its label and of the net floor computed by hand (4825 x 5750 and 3825 x 5750), the schedules must list D1, D2, W1, W2, and the plan is gated on a zero-issue critique and a finalize score of at least 90. A test removes one room label and the gate fails naming arch_room_unlabelled. - Four correctness checks, every number worked out by hand in the docstring: L / T / X junction corners and wall areas, a 4 x 5 m room labelled 20.00 m2 rather than its 21.84 m2 axis area, a door interrupting both faces, and a plan of plain lines read as 20 and 15 m2 at confidence 0.6. The published A/B report is re-run over 43 checks: 26 / 43 -> 43 / 43, zero regressed. - scripts/smoke_arch_com.py runs the whole plan once on a live seat and closes every document it opens; the CHANGELOG records what it returned. - The token suite measures a TOOL_PACKS=core,arch row; check_doc_numbers derives the task count from the v6 matrix; CLAUDE.md, both READMEs and the spec status line say what shipped. - fix(com): the first live smoke exited 1 - the room reader found 0 wall segments. Measured on AutoCAD 2026 (2026-09-23): with a makepy cache, ModelSpace.Item(i) returns the gen_py IAcadEntity wrapper (type(item).__name__ == "IAcadEntity") and item.StartPoint on an AcDbLine raises AttributeError, so every entity_list row lost its type-specific properties (28 wall LINEs, 0 with start/end). _entity_info now re-dispatches exactly that wrapper through _com_unnarrow; after the fix 38 of 53 rows carry start/end and the smoke exits 0 with both rooms at 27 743 750 / 21 993 750 mm2 and 0 critique issues. Re-dispatch measured at ~1.7 ms per entity (dynamic vs gencache alike). Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
9168d61397 |
feat(task-6): door, window and room schedules read from the drawing
engineering/arch/schedule.py turns the plan records into schedule rows: doors by tag with width, height, swing, hand and wall; windows by tag with width, height, sill and wall; rooms by number with name and the measured area the label carries, plus a total. Tags compare as numbers (D2 before D10). An opening without a tag gets the next free D1 / W1 - K1 / P1 in Turkish - in wall order; an explicit tag is never renumbered and a generated one never repeats it. A value the model does not carry is an empty cell, never a default, and Turkish output writes decimal commas. draw_schedule reads the ACADMCP_ARCH records off the drawing through the one reader rooms.py already has and draws a real TABLE the way the ISO 7573 parts list does - top-left insertion, the table growing down, the parts list's 7 mm rows and 2.5 mm text at the plot scale, the engine's representation reported. Nothing to schedule, an unknown kind or language and more rows than one TABLE takes are refused before anything is drawn. arch_schedule joins arch_room and arch_rooms_detect under SECTION 25's rooms marker (banner 3 tools), shares the TABLE command with entity_create_table and bom_table, and the counts follow: 232 tools in 25 groups. Live fix in com_backend.entity_create_table. MEASURED on AutoCAD 2026: IAcadTable has no TextHeight property. pywin32 raised AttributeError on `table.TextHeight = h`, the old code swallowed it, and every live table kept the Standard style's heights (title 6.0, header and data 4.5), which is 0.1 mm on paper at 1:50. The member that works is SetCellTextHeight(row, col, h), probed on a scratch document: every cell read back 125.0 via GetCellTextHeight. The row heights stayed 350.0 and GetBoundingBox matched the reported bbox (10000,3250)-(15750,5000). Then draw_schedule ran end to end through ComBackend on a scratch document: a native TABLE on A-SYMB-T-N for doors (5 rows) and rooms/tr (6 rows, total 45,00 m²), and the document was closed afterwards. The new fake in tests/test_table_leader.py has only the measured members. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
2bba18d0f7 |
fix(com): hatch islands on a live seat — typed edges become temporary entities
hatch_add_boundary was refused on COM (hatch_edge_paths), so a transverse section of any hollow part — a bushing, a flange bore — could not be drawn in AutoCAD at all: draw_prims asked the capability map and refused up front. ActiveX takes a loop as whole objects, which is not the same as "cannot take a typed edge": each edge now becomes a real temporary LINE, true ARC or ELLIPSE in the hatch's own space, appended with AppendInnerLoop, evaluated and deleted. A loop that is only chained lines becomes one closed polyline — one COM call instead of 180 for a flattened bore. The edge list is validated in full first with the headless engine's messages; a loop AutoCAD refuses is taken back out with its temporaries. Measured on AutoCAD 2026 (25.1s), in scratch documents closed unsaved: - a two-arc island leaves exactly 10000 - 100*pi (9685.8407) of a 100 x 100 hatch; - the OD40/ID20 sleeve's transverse section B-B, drawn through the view engine and draw_prims, hatches 942.2864 mm2 — the engine's declared 180-gon; - an open chain is refused (E_FAIL) and the entity count is unchanged. hatch_edge_paths is now supported on both engines. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
e6f685643d |
fix(com): a DXF type filter finds what ActiveX names differently
block_find_references asks entity_list(type_filter="INSERT"), and ActiveX calls a block reference AcDbBlockReference, so on a live seat the filter matched nothing and every block reported zero references. Measured on AutoCAD 2026 (25.1s): AcDbBlockReference, AcDbPolyline, and one class per dimension kind (AcDbRotatedDimension, AcDbAlignedDimension, AcDbDiametricDimension, AcDbRadialDimension, AcDb2LineAngularDimension, AcDbOrdinateDimension). entity_list and entity_count now let the DXF name find them: INSERT matches BLOCKREFERENCE/MINSERTBLOCK, LWPOLYLINE matches POLYLINE, and DIMENSION every *DIMENSION class. The reported type stays the ActiveX spelling, so a caller already filtering by it is unaffected. Verified live in a scratch document: two inserts, one dimension and one line are found by INSERT, DIMENSION and LINE (the INSERT filter found 0 before). Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5.5
|
898e775f93 |
bench: matrix v5 adds mech_assembly; the correctness suite grows with the mechanical and sheet checks
The evidence for tracks B and G, in the shape tracks A and E used.
- benchmarks/tasks_v5.py: 18 tasks, DEFAULT_MATRIX = "v5"; v4, v3 and v2 stay
addressable so an earlier report reproduces exactly rather than being only
described. mech_assembly is roadmap criterion 3 - a flange-coupling sheet
built from the part model and the sheet standard, through the code the
tools call (apply_titleblock, draw_part/add_view/dimension_part,
insert_std_part, extract_records -> draw_bom_table, add_balloon), gated on
two numbers that cannot be negotiated: drawing_critique(focus=None) returns
zero issues and the finalize score is at least 90 (it scores 100, 18/18 on
the v5 matrix). The adapter returns the focuses that fired, so a
regression names itself, and a test drops one balloon to prove the gate
fails and names mech_bom_balloon_mismatch.
- Seven correctness checks (32 -> 39). mech_section_hatch_area is the one
that cannot be faked: a sleeve of length 60, outside diameter 40 and bore
20 cuts two faces totalling 1200 mm^2 exactly, read back out of the drawing
through entity_measure. sheet_frame_iso5457_a3 pins the A3 frame (20,10 to
410,287 inside the 420 x 297 trimmed sheet); mech_iso286_on_dimension pins
40 H7 at +0.025/0 through the layout; std_part_iso4014_m12 pins s = 18 and
k = 7.5 by value; mech_thread_unrepresented_is_caught is the seventh: a
quality gate that never fires is not a gate.
- scripts/smoke_mech_com.py executed every new COM path once on AutoCAD 2026
(25.1s): frame, title block, a sectioned shaft with 12 dimensions, an ISO
4014 block with 1 ACADMCP_MECH chunk, a weld symbol, the parts list read off
the drawing, a linked balloon, an xref attached / listed / detached, a
31687-byte .dwg (AC1032) through ActiveX SaveAs, critique 0 issues, exit 0,
every scratch document closed. It retries RPC_E_CALL_REJECTED (measured:
the first call after Documents.Add is refused) and tracks its documents by
the document list, since SaveAs renames them.
- Defects the evidence found, each fixed with a test that fails on the old
code:
* ezdxf dimension_diameter put the text beyond the SECOND chord point;
ActiveX AddDimDiametric puts it beyond the first (measured live: a d50
from (x,170) to (x,220), leader 10, text at (x,160)). Headlessly every
front-view diameter stood on its own chain dimension. ezdxf now follows
ActiveX.
* draw_part's anchor goes on MECH; ActiveX refuses entity.Layer on a
missing layer (measured -0x7ffdfff7 'Key not found'). draw.py ensures
every target layer before the first entity.
* bom.extract_records filtered on INSERT; ActiveX names it BLOCKREFERENCE
(ObjectName AcDbBlockReference) - the live parts list was empty.
* COM _entity_info reported no dimension text_position: ModelSpace.Item
narrows to IAcadEntity, which has no TextPosition (measured
AttributeError); read through _com_unnarrow (TextPosition measured on
AcDbDiametricDimension, WCS). dim_overlap compared bbox centres and a
diameter collided with its own bore.
* pid graph raised KeyError 'start' mid-critique on a LINE whose point read
AutoCAD refused while busy; such a line is left out.
* the validator read "ISO 4014 - M12x60" as fake dimension text.
- The published A/B report is re-run over the grown suite rather than
re-typed (26/39 -> 39/39, 13 fixed, 0 regressed), check_doc_numbers derives
the task count from the v5 matrix, the token table is remeasured with a
TOOL_PACKS=core,mech row (193 tools / 61,673 tokens), and the README's
collected-tests figure is retaken (3990).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
301610620c |
fix(task-14): detach an xref out of every space, and stop the live engine inventing facts
Three blocking findings on the refs group, all of them the same shape: a number or a refusal the caller was entitled to read as measured. 1. ezdxf xref_manage: the victim scan and the `inserts` count both walked `doc.modelspace()` only, then dropped the definition with `delete_block(safe=False)` -- the flag that suppresses the in-use check. An xref shown on a paper-space sheet was reported as 1 insert where the drawing held 2, and detaching it left that sheet INSERT with no BLOCK behind it: `ezdxf.recover` reports `FIX 103 UNDEFINED_BLOCK: Deleted entity INSERT(#34) without required BLOCK definition` and the repo's own drawing_audit silently deletes the sheet geometry. The scan now walks `doc.blocks`, which is every entity space (model space, each paper-space tab, every block definition) and is exactly what ezdxf's own safe check searches with `doc.query('INSERT[name==...]i')` -- hence the case-insensitive name match. `delete_block` is now `safe=True`, as the plan's Interfaces block pins it, so a future miss raises instead of writing a corrupt file. 2. COM xref_manage(action='list') reported `kind: "attach"` for every row, a literal constant. Re-measured on this seat's registered type library (C:\Program Files\Common Files\Autodesk Shared\acax25*.tlb, "AutoCAD 2025 Type Library", installed with AutoCAD 2026): IAcadBlock's xref members are exactly IsXRef, Path, Name, Reload, Unload, Bind, Detach, XRefDatabase -- no overlay indicator exists on the interface, so an overlay was reported to the client as an attachment. The row now says `kind: None`, the same honesty the adjacent `inserts` field already had, and the contract plus the tool docstring say so. 3. COM xref_attach had no duplicate-block-name guard, although contracts/refs.py and the tool docstring both promise the refusal and ezdxf implements it. Two different part.dwg files, or a re-attach after a repath, silently re-pointed or half-wrote the definition while the payload claimed the new path. Added `_block_names(doc)` (Blocks.Count / Blocks.Item(index) / block.Name -- the members xref_manage already walks) and the refusal fires before AttachExternalReference is dispatched, with the same message the headless engine gives. Lower-cased, because AutoCAD symbol-table names are case-insensitive. Tests: five new ones, each failing against the unfixed backends -- an xref shown on Layout1 is counted and detached with the drawing, the detached file audits clean through ezdxf.recover, delete_block's in-use check is pinned, the live listing reports kind None (against a fake that models only the measured members, so it cannot enshrine an invented one), and the live attach refuses a held name (xref and plain block, either case) without dispatching. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
3ef316d520 |
feat(refs): xrefs, raster underlays, data extract and real DWG output
SECTION 24 completes at eleven tools with xref_attach, xref_manage,
image_attach, data_extract and drawing_export_dwg, on the four contract members
that genuinely differ per engine -- backends/contracts/refs.py. Everything else
in the sheet track composes the generic members and is written once.
The ActiveX members were read off the AutoCAD 2026 seat's own type library
(C:\Program Files\Common Files\Autodesk Shared\acax25enu.tlb, "AutoCAD 2025
Type Library" 1.0, the library the running 25.x seat registers) before a line of
the COM path was written, and the measurement is in the code beside the calls:
IAcadModelSpace.AttachExternalReference(PathName, Name, InsertionPoint,
Xscale, Yscale, Zscale, Rotation, bOverlay, Password)
IAcadModelSpace.AddRaster(imageFileName, InsertionPoint, ScaleFactor,
RotationAngle)
IAcadBlock: IsXRef (get), Path (get AND put -- so the repath is an assignment,
not a method), Reload(), Unload(), Bind(bPrefixName), Detach(),
XRefDatabase (get)
IAcadDocument.SaveAs(FullFileName, SaveAsType, vSecurityParams)
AcSaveAsType: ac2000_dwg=12 ac2004_dwg=24 ac2007_dwg=36 ac2010_dwg=48
ac2013_dwg=60 ac2018_dwg=64 (=acNative)
The running seat itself was not answering COM while this landed (its window was
Not Responding and GetActiveObject never returned), so the type library -- which
is the same seat's declared surface and reads without a call into the process --
is what the members are measured from; no document of the operator's was opened
or touched. This repository has been bitten four times by a fake that invented a
member, so the COM fakes in the tests model those names and nothing else.
ActiveX angles are radians, so the degree-to-radian conversion happens at that
boundary and nowhere else.
Headlessly, ezdxf.xref.attach carries the attachment (measured on ezdxf 1.4.4:
block flags 20 for an attachment and 24 for an overlay, so "is this an xref" is
flags & (BLK_XREF | BLK_XREF_OVERLAY) -- masking BLK_XREF alone misses every
overlay), add_image_def + add_image the raster, with Pillow reading the pixel
size so the placed image keeps the file's aspect.
Three capability keys, declared in both maps:
dwg_write -- measured absent here (odafc.is_installed() is False), so the
ezdxf entry is a runtime re-evaluation like viewport_render's
matplotlib check rather than a hardcoded False: installing the
ODA File Converter starts the call working with no edit to the
map. The refusal names the install route and drawing_export_dxf.
xref_live -- reload and bind need a live seat's xref manager and are refused
headlessly; list, detach and path are headless and are not
behind the key.
xlsx_write -- openpyxl is optional and absent here; CSV is always available,
so the refusal never blocks the deliverable and says so.
Two numbers the plan predicted wrongly are corrected to what the registry
actually does. `block` outranks `drawing` in _GROUP_TAG_PRIORITY, so the two
xref tools file under `blocks` (9 -> 11) beside block_insert -- which is where
an xref belongs, being a block definition that lives in another file -- and
`drawing` moves 11 -> 12, not 11 -> 14. And `data_extract` must not say "parts
list" in its own text: that is the golden discovery query for
entity_create_table, and a file writer outranking the tool that draws the thing
is a regression the tuning bar catches. It is described by its destination --
a file -- instead.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
b54271f4ac |
fix(com): four live defects the settings smoke measured on AutoCAD 2026 — rejected calls after a document switch, typelib spelling of color/Lineweight, narrowed layer-state dictionary, layer 0 Freeze put
Measured 2026-09-22 by scripts/smoke_settings_com.py --build-dwt against the running AutoCAD 2026 (25.1s), each on a scratch Documents.Add() document: 1. RPC_E_CALL_REJECTED (-2147418111) on Documents.Count straight after Documents.Open, after Close(False) inside document_close, and in _ensure_document_state: AutoCAD's own message filter refuses incoming calls while it is still switching documents. pywin32 exposes no CoRegisterMessageFilter, so _wait_out_rejected_call waits the window out for read-only callables (0.25 s -> 1 s pauses, 20 s budget, inside COM_CALL_TIMEOUT) at those sites and after Documents.Add/Open; any other com_error is not retried. 2. layer_list raised "'IAcadLayer' object has no attribute 'Color'. Did you mean: 'color'?": acax25enu.tlb spells IAcadEntity/IAcadLayer `color` and `Lineweight`. Late-bound dispatch resolved .Color/.LineWeight case-insensitively; with a makepy cache present (this machine's gen_py was regenerated on 2026-09-17, and every object a method returns is then a generated wrapper) the lookup is exact. All 17 sites now use the typelib spelling, which works on both wrappers; the fakes model the measured names. 3. layer_state_restore raised "'IAcadObject' object has no attribute 'Count'": Dictionaries.Item and IAcadDictionary.Item are declared IAcadObject* (the narrowing _com_unnarrow already handles for MLEADER styles). The save path went through the typed Dictionaries.Add, so only the reopen paths failed. Both now un-narrow; the fakes narrow like pywin32. 4. The Freeze put on layer 0 raises 'Invalid layer' whatever the value, even False while thawed (color/Linetype/Lineweight/Plottable/LayerOn/Lock/ ActiveLayer all fine on it), so a state saved with 0 current restored with two warnings and 0 unapplied. Freeze is written only when it changes the layer. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
f7528b2fa5 |
fix(com): every system variable is read and written on the ActiveX document, not the Application
AcadApplication has no GetVariable/SetVariable members; they live on
AcadDocument. Measured on the running AutoCAD 2026 (25.1s, 2026-09-22,
scratch Documents.Add(), Close(False)):
hasattr(app, 'GetVariable') -> False
hasattr(app, 'SetVariable') -> False
app.GetVariable('INSUNITS') -> AttributeError: ... IAcadApplication
instance ... has no attribute 'GetVariable'
doc.GetVariable('INSUNITS') -> 4
doc.GetVariable('MEASUREMENT') -> 1
doc.GetVariable('FILEDIA') -> 1; doc.SetVariable('FILEDIA', 0) -> None,
reads back 0, restored to 1
doc.GetVariable('AUDITCTL') -> 0, 'CMDACTIVE' -> 0, 'USERS1' -> ''
Fifteen call sites in backends/com_backend.py still went through the
Application inside `try/except ... log.debug`, so on a live seat they
silently degraded: MEASUREMENT defaulted every seat to metric,
drawing_info reported units from a failed INSUNITS read, drawing_audit
never set AUDITCTL, the CMDACTIVE guards of system_run_command /
system_run_lisp never fired and run_lisp never read USERS1 back. All are
rerouted through `_acad_doc()`; the try/except stays only where an
optional read is defaulted (INSUNITS -> "Unknown", AUDITCTL absent on a
host that lacks it, USERS1 after the expression ran) and the log line
says so.
Linetype loading, measured the same way: `SendCommand("_-LINETYPE _LOAD
CENTER acadiso.lin\n\n")` loads nothing with FILEDIA=0 and leaves the
command at `Enter an option [?/Create/Load/Set]:` (LASTPROMPT), which
makes the whole seat answer RPC_E_CALL_REJECTED to every client until
ESC is pressed; with FILEDIA=1 it opens the modal "Select Linetype File"
dialog. `doc.Linetypes.Load("CENTER", "acadiso.lin")` returns None and
the table grows 3 -> 4; a repeat raises 'Duplicate record name', an
unknown name 'Undefined linetype', a missing file 'File system error'.
`_ensure_linetype_loaded` and `linetype_load` now call `Linetypes.Load`
(MEASUREMENT still read on the document to pick the .lin), touch no
FILEDIA, and report a failure with the English excepinfo description.
`apply_standard` reads every variable it will write before the first
style is created, so a read the engine refuses is a refusal with nothing
written (it used to fail after ISO-25 / ISOCP were created and current).
Fakes: every application fake refuses GetVariable/SetVariable
(tests/test_styles.py's COM fixture carried them on the Application,
enshrining the wrong shape); the members exist on document fakes only.
Regression tests per rerouted site: linetype load via Linetypes.Load with
MEASUREMENT on the document, drawing_info units from the document,
AUDITCTL set/restored on the document, CMDACTIVE/USERS1 on the document,
apply_standard refusing before any write.
Live end-to-end with the real ComBackend on a scratch document:
apply_standard('iso') -> INSUNITS 4, ISO-25 (already in acadiso.dwt,
created: false) and ISOCP (created: true) current, second call created:
false / changed: {}; linetype_load('CENTER') -> Linetypes 3 -> 4, FILEDIA
stays 1, repeat already_loaded, 'NOSUCHLT' refused by name;
_ensure_linetype_loaded('HIDDEN') -> 3 -> 4; drawing_info units 'mm';
drawing_audit AUDITCTL 0 -> 0; system_run_command ok;
system_run_lisp('(+ 40 2)') -> '42'.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
90c1194f7f |
merge: track-e group V
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
8e05b5e8eb |
merge: track-e group P
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
3278586c6e |
merge: track-e group C
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
0a581a8da3 |
merge: track-e group S
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
b458923e19 |
feat(templates): drawing_template_save on both engines — dwt_write is a declared capability
Live AutoCAD writes a real .dwt through SaveAs(path, ac2018_Template = 66) and puts the description into the summary Comments; headlessly a .dxf template is written through drawing_save_as and a .dwt request is refused with capability dwt_write, naming the DXF route and the COM route. drawing_save_as's "dwt" entry was 5 (acR13_dxf): a DWT request wrote an R13 DXF under a .dwt name. Probed live on AutoCAD 2026 (typelib: ac2018_Template = 66, acR13_dxf = 5, acTemplateDwg absent; the saved file starts AC1032, the document is rebound, Comments takes). SECTION 19 is now 6 tools; SAVEAS joins SHARED_ACAD_COMMANDS; templates/README.md documents the two files per template. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
021a4eb43d |
fix(task-11): dimensions_using_style is one filtered selection set, not a per-entity COM walk
_com_dimensions_using walked every entity of every layout and, since the un-narrowing fix, re-dispatched each one through a dynamic proxy before reading ObjectName (~8-10 ms per entity), which put dimstyle_modify past the 60 s COM_CALL_TIMEOUT on a ~6k-entity drawing after its SetVariable + CopyFrom had already landed. It is now a single SelectionSet.Select(acSelectionSetAll, (0 . "DIMENSION") (3 . <style>)), which answers from AutoCAD's own index whatever the drawing size. Measured live (AutoCAD 2026, scratch doc, 1000 LINEs + 14 dimensions across model and paper space): walk 12.7-15.8 s, selection 0.02-0.09 s, identical handle sets; the whole dimstyle_modify tool now returns in 0.07 s. The group-3 filter value is a wcmatch pattern, so the style name is backtick-escaped (_wcmatch_literal): unescaped, "A.B" also selected the dimensions of "A_B", "N#1" those of "N21", "P[1]" those of "P1", "S@X" those of "SAX" (measured). Handles are returned in ascending handle order, Select failures propagate, and the selection set is deleted either way. tests/test_styles.py: the fake document carries a SelectionSets that emulates ssget "X" over every layout with wcmatch-literal semantics and narrowed IAcadEntity items, refusing an unescaped wildcard; three tests cover no-per-entity-read, escaping, and cleanup-on-failure. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
17f7228fd6 |
fix(task-19): a .dxf template really reaches the live seat; the fallback dimvars land on Standard
Documents.Add(<file>) accepts only a genuine DWT. Measured on AutoCAD 2026: Add(templates/iso_a3_pid.dxf) returned the default acadiso drawing (layers ['0'], Layout1/Layout2) exactly as Add() and Add(<missing.dwt>) did, so drawing_new(template=<bundled name>) reported ok:true with source 'bundled_dxf' over a blank document, and the explicit .dxf path route was just as blank. ComBackend.drawing_new now converts any non-.dwt template through AutoCAD itself (Documents.Open read-only -> SaveAs ac2018_Template, older constants tried next -> Close(False)), caches the .dwt in the temp folder keyed on path/size/mtime, hands Add the .dwt, and refuses a missing template file instead of letting Add default silently. The tool result carries template.dwt / template.dwt_cached. Re-measured end to end through server.drawing_new on the real ComBackend: ansi_b_mech -> 11 layers, tab B, DIMTAD 0 / DIMTIH 1 / DIMEXO 1.5; iso_a3_pid -> 17 layers, tab A3, second call reuses the cached .dwt (0.8 s conversion once). Fake-ActiveX tests pin the call shape and that the conversion document never stays open. Headlessly the build's fallback wrote spec 4.1 only as header DIM variables, and the renderer folds six of them, so DIMTAD/TIH/TOH/EXE/EXO/GAP/LUNIT/LWD were a no-op: ansi_b_mech dimensioned with ISO text placement while system_get_variable and AutoCAD said ANSI. The fallback now also stores each value on the Standard dimstyle; the five DXFs are rebuilt (--check passes) and a test reads the effective values off a DIMENSION drawn from each template and asserts header and style agree. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
03a5067d83 |
fix(task-11): live text styles write TrueType by typeface, refuse missing fonts and arrowhead blocks before any write, un-narrow the dimension walker
Four review findings against the COM styles block, all measured on AutoCAD 2026
(scratch documents from Documents.Add, closed without saving):
1. textstyle_create: `TextStyle.fontFile = "arial.ttf"` raises 'Filer error' for
every bare TrueType name (bundled presets included) after TextStyles.Add has
run, leaving a stub with an empty font that a retry meets as "already exists";
a full path is accepted but the STYLE record then carries the machine path.
`SetFont("Arial", bold, italic, 0, 0)` — the STYLE dialog's own route — stores
the clean `arial.ttf`. The font is now located before Add (`_com_locate_font`:
support path, then the Windows font folders), a TrueType is written by the
family/subfamily read from its `name` table (`_truetype_face`), an SHX by the
name given, an unlocatable file is refused with nothing written, and a write
ActiveX still refuses after Add deletes the entry it added.
2. _ensure_com_textstyle goes through the same helper, so DIMTXSTY / text_style
ARIAL and ISOCPEUR are created on the first call with a real font instead of
failing once and then silently binding a fontless style.
3. dimstyle_create / dimstyle_modify check a user DIMBLK/DIMBLK1/DIMBLK2 against
doc.Blocks before any write (`_com_require_arrowhead_blocks`, the headless
`_require_arrowhead_blocks` twin, same message and table-spelling rewrite);
a write that fails after DimStyles.Add restores the previous ActiveDimStyle
(discarding the unsaved overrides) and deletes the half-made style and any
preset text style the call created.
4. _com_dimensions_using un-narrows each `Layouts.Item(i).Block.Item(p)` —
declared IAcadEntity*, so `.StyleName` raised AttributeError under a makepy
cache and the blanket except reported `[]` — and swallows nothing.
The fake in tests/test_styles.py now models the measured ActiveX rules (bare
TrueType fontFile refused, SetFont by installed typeface, SetVariable refusing an
unknown arrowhead, IAcadEntity narrowing on block items, Delete) so the old code
cannot pass; nine tests cover the four findings. SECTION 18 docstrings state the
live engine's refusal rule for fonts and the pre-write arrowhead check.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
dda11755cf |
fix(task-16): custom keys follow AutoCAD's simple case compare, and on COM AutoCAD routes the write
|
||
|
Umut CANandClaude Opus 5
|
2e101b95e2 |
fix(task-5): a rollback that fails after a cancellation no longer kills the session, and the COM rollback goes back to an UNDO Mark instead of prompting
Two review findings on
|
||
|
Umut CANandClaude Opus 5
|
4fe2d963c0 |
fix(task-16): custom keys mirror AutoCAD's full AddCustomInfo rule, deletes are exempt, keys match case-insensitively
The |
||
|
Umut CANandClaude Opus 5
|
f6951e2597 |
fix(task-18): the COM plot is foreground, by layout name, and confirmed on disk; plot_style_list reads PrinterStyleSheetPath
Three review findings against SECTION 19 on the live engine, each measured on AutoCAD 2026 in a scratch document with the operator's BACKGROUNDPLOT=2: - plot_style_list read Preferences.Files.PrintStyleSheetPath; the ActiveX member is PrinterStyleSheetPath, so the AttributeError was swallowed and every row came back installed=None. Renamed in the backend, the server docstring and the test fake (which faked the same wrong name). Live: 13 rows, all 9 catalogue ctb files installed, four .stb files as installed. - ComBackend.drawing_export_pdf returned ok before any file existed under background plotting, so batch_plot died on path.stat() with an unhandled FileNotFoundError and a later foreground plot raised E_FAIL. The export now sets BACKGROUNDPLOT=0 around PlotToFile (restored after), honours the method's bool and reports ok only with the file on disk (bytes included). batch_plot turns a backend RuntimeError or a phantom ok into a per-row ok:false, keeping the rows already plotted. - With a sheet current, the Model row was that sheet plotted again: the COM export switched tabs only when a layout was named. layout=None now makes Model current (restoring the tab), and batch_plot names every layout, Model included, so both engines plot the tab the row is labelled with. Live: Model row /Title (Model) at 210x297 beside the A3 sheet, the active tab and BACKGROUNDPLOT restored. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
2052915f34 |
fix(task-23): user_select reports the picked point in WCS — GetEntity answers in the current UCS, so translate acUCS→acWorld before returning
Measured on AutoCAD 2026: under a UCS at (100,50) rotated 90 deg, a pick on a circle at WCS (105,70) came back from IAcadUtility.GetEntity as (20,-5,0), while Utility.GetPoint already answered in WCS. A model doing ucs_set -> user_select -> entity_create_* at `picked` would place geometry at a silently wrong position. The point goes through Utility.TranslateCoordinates(acUCS, acWorld) packed as a VT_ARRAY|VT_R8 VARIANT (the plain tuple GetEntity hands back is refused as "Invalid argument Point"). The fake Utility now models the UCS frame and the VARIANT requirement; a new test pins the measured figures and checks GetPoint stays untranslated. Docstrings state WCS. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
266b6fb838 |
fix(task-10): un-narrow the ACAD_MLEADERSTYLE dictionary route so mleaderstyle_list/create work on the live engine
acax25enu.tlb declares IAcadDictionaries.Item, IAcadDictionary.Item and IAcadDictionary.AddObject as returning IAcadObject*. With a makepy cache for the AutoCAD type library present (it is, on any machine where gencache ever ran against AutoCAD), pywin32 wraps each result in the gen_py class of the declared type, which exposes only IAcadObject members: .Count/.Item/.GetName on the dictionary and .ArrowSize/.LandingGap/.TextHeight/.TextStyle on a style all raised AttributeError, so the previous round's removal of the @capability refusal turned a typed UnsupportedCapabilityError into a raw AttributeError on AutoCAD 2026. `_com_unnarrow` re-dispatches an object on its raw IDispatch through win32com.client.dynamic.Dispatch (no gencache side effect, unlike CastTo), and the dictionary route applies it to the dictionary, to every Item(i) and to the AddObject result. Verified live on AutoCAD 2026 (scratch document, closed afterwards): list reads Standard = 0.18/0.09/0.18/Standard, create writes ISO-LDR = 2.5/1.0/2.5/ISOCP, the duplicate is refused, and an independent late-bound read of the dictionary agrees. The fake in tests/test_styles.py now models the narrowing: Dictionaries.Item, Dictionary.Item and Dictionary.AddObject hand back a wrapper that answers only IAcadObject members and raises on everything else (reads and writes alike) until unwrapped through _oleobj_. Five COM tests fail against the previous backend and pass now; a new test pins the missing-dictionary path (Dictionaries.Add before AddObject). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
f25421709f |
feat(pagesetup): SECTION 19 — page_setup_list/apply, plot_style_list, batch_plot with /MediaBox read-back
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
b83a74e969 |
feat(environment): system_launch, preference whitelist and operator prompts on COM; declared refusals headlessly
user_pick_point / user_select answer {cancelled: true} on ESC (DISP_E_EXCEPTION)
and {timed_out: true} past COM_CALL_TIMEOUT; preferences_set refuses read-only,
unknown and out-of-range keys before any ActiveX call.
The read-only key is Files.PrinterStyleSheetPath, not the spec's
PrintStyleSheetPath: IAcadPreferencesFiles has no member of that name
(measured live on AutoCAD 2026 / R25.1), and a misspelt key would make
preferences_get() raise on every live call.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
10a7372ce7 |
feat(settings): drawing_properties_get/set — SummaryInfo on COM, custom properties on both engines
Summary fields are refused headlessly with capability dwgprops before any write; custom properties are $CUSTOMPROPERTYTAG/$CUSTOMPROPERTY pairs and survive save + reopen. Validation is shared, by name, and never str()-coerces. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
e204f227b4 |
fix(task-10): $DIMBLK header carries the canonical arrowhead name; MLeaderStyle is authored on COM through the ACAD_MLEADERSTYLE dictionary
Two review findings, both root causes.
1. `_sync_header_to_dimstyle` copied the DIMSTYLE entry's ezdxf-internal
arrowhead spelling (OBLIQUE) into the DXF-facing $DIMBLK/$DIMBLK1/$DIMBLK2
header, so the saved file named a block it did not hold (the blocks are
_OBLIQUE / _DOT) and `system_get_variable("DIMBLK")` answered "OBLIQUE"
headlessly against "_OBLIQUE" on COM and in the same engine's own
`dimstyle_list` row. The header write now goes through
`reported_arrowhead` — the same read-side rule `_dimstyle_value` applies.
Pinned by header, `system_get_variable`, save/reopen (`ezdxf.readfile`
header equals the block the file holds) and the Restore-to-Standard
empty-string case in `test_builtin_arrowheads_render_save_and_report_one_spelling`.
2. The `mleaderstyle` capability refusal rested on a false engine boundary.
acax25enu.tlb (AutoCAD 2026) exposes IAcadMLeaderStyle with Name,
ArrowSize, LandingGap, TextHeight, TextStyle, ... — exactly what
`Dictionaries.Item("ACAD_MLEADERSTYLE").Item(i)` returns — and
IAcadDictionary.AddObject(keyword, "AcDbMLeaderStyle") creates one.
COM `mleaderstyle_list` now reads the four values off those objects
(`values_available: True`); COM `mleaderstyle_create` validates every value
(`validate_mleaderstyle`, shared with ezdxf), checks the clash and the text
style before AddObject, then writes the four properties. The contract
method is `@abstractmethod` again, the key is gone from both capability
maps, the fake ActiveX surface models the real call shape, and the spec
(§4.2, §8.1, §9) states the ActiveX route.
Live AutoCAD was not running on this machine (GetActiveObject: operation
unavailable; no acad.exe), so the COM route is type-library-verified and
fake-tested, not executed live — scripts/smoke_settings_com.py (Task 24)
owns that.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
c7dd72410a |
fix(task-22): live named views read and restore the display (VIEWCTR/VIEWSIZE, ZOOM Window), UCS sysvars come from the document, and a frozen current layer is thawed before restore makes it current
Four review findings, all measured by the reviewer on AutoCAD 2026:
1. ucs_list and the ucs_restore('world') CMDACTIVE guard read
app.GetVariable, but GetVariable is an AcadDocument member — the tool
was dead live and the guard's swallowed read forced cmd_active to 0,
sending `_.UCS _W` into any open prompt. Both read the document now,
and a failed CMDACTIVE read refuses instead of proceeding. The fake
app in tests/test_views_ucs.py has no GetVariable any more, so the
old code cannot pass.
2. view_named_save defaulted from doc.ActiveViewport.Center/Height/Width,
which does not track the display (it answered the initial view after
`_.ZOOM _C 5,6 20`). The current view is VIEWCTR / VIEWSIZE at the
SCREENSIZE aspect — what `-VIEW _S` records (width 40.267 for height
20). The fake viewport is deliberately stale so a read of it fails.
3. view_named_restore wrote Center/Height/Width into the AcadViewport;
AutoCAD anchors the lower-left corner and widens to the display
aspect, landing a 10x20 view at (5, 6) on VIEWCTR (20.134, 6). It now
zooms the saved rectangle (app.ZoomWindow), which centres and fits
like `-VIEW _R` (VIEWCTR = saved centre, VIEWSIZE = max(h, w/aspect)),
reports `applied: "zoom_window"` and reads VIEWCTR / VIEWSIZE back.
Headless the same reconciliation moved the centre whenever the
*Active VPORT's aspect was rewritten from w/h (even the 1.34 default
opened at x = 11.734): the aspect the file carries is left alone —
it is the display's, written by AutoCAD at save — and the window is
fitted into it; the payload adds `vport_height` / `aspect_ratio`.
4. layer_state_restore set ActiveLayer before the loop and outside the
try; AutoCAD refuses to make a frozen layer current, so the spec's
own save → freeze → restore path raised an opaque COM error with
nothing applied. When `frozen` is being restored the state's current
layer is thawed first; the write is wrapped and a refusal lands in
`warnings`. The fake document and layer now model both refusals.
Live AutoCAD was not running in this round (GetActiveObject failed, no
acad process), so the fix is measured against the reviewer's numbers,
not re-measured.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
b464bcdaf5 |
fix(task-4): block_define dedupes requested layers case-insensitively so one layer in two spellings is created and reported once
DXF and ActiveX layer tables are case-insensitive, but block_define collected the primitives' layers with a case-sensitive set. A request naming 'Alpha' and 'ALPHA' with create_layers=True made ezdxf add the first, then raise DXFTableEntryError on the second after the write — layer left behind, no block, surfaced as an internal error instead of a named refusal. COM ran Layers.Add twice, got the existing layer back the second time, and reported two layers created for one that appeared; the two engines diverged and the refusal message without create_layers named the same layer twice. referenced_layers() in backends/block_specs.py keys the set on the folded name and keeps the first spelling; both engines consume it. _FakeLayers in the hardening tests now matches Item/Add case-insensitively and returns the existing record on a duplicate Add, as the ActiveX table does, so the COM path is pinned. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
375c9f4c70 |
fix(blocks): block_define refuses a non-finite base point and a missing layer unless create_layers
base_x/base_y were only float()-cast, so a NaN base point was written into the BLOCK record; a primitive on a layer the drawing lacks was written as a dangling reference doc.audit() never flags (and on COM would fail mid-loop after Blocks.Add). validate_base_point names the key; the layer table is probed before the first write and the missing names are refused, or created and reported as layers_created when create_layers=true (new optional kwarg, contract + both engines + tool). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
7f79497928 |
fix(blocks): attribute values are validated before any write; null/bool/objects refused by tag
block_insert and block_set_attributes applied str() to whatever arrived, so a JSON null became the text None and a non-mapping failed after the INSERT was written. validate_attribute_values (backends/block_specs.py) runs first on both engines: strings pass the one-line rule, ints and finite floats are written as plain digits, everything else is a TypeError naming the tag. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
b753a12bb6 |
fix(task-2): find_replace rewrites every surface of a multi-line attribute; COM explode propagates a failing read and undoes a failed burst
Headless text_find_replace matched and wrote only dxf.text of an ATTRIB/ATTDEF, so on a multi-line attribute it reported replaced: 1 while block_get_attributes and block_explode still carried the old embedded MTEXT (and a needle on the second line was never found). The ATTRIB/ATTDEF branch now reads through _attrib_value and writes through _write_attrib_value, the same pair block_get_attributes / block_set_attributes use. COM block_explode swallowed a failing GetAttributes() (attrs = ()), GetConstantAttributes() and Invisible, then exploded, deleted every ATTDEF placeholder and the reference and returned ok: True with no attribute text -- every value destroyed silently on a transient RPC_E_CALL_REJECTED. Those reads now happen before Explode() and propagate with nothing written; a failure after the explode deletes the members it added and the TEXTs written so far and leaves the reference in place (_undo_explode), so the drawing is never left half-burst under an exception. The fakes gain the members a live AcadBlockReference / AcadAttributeDefinition always expose (GetConstantAttributes, Constant, Invisible) instead of relying on the swallow. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
5f33613460 |
fix(task-2): COM burst MTEXT anchors after the attachment; headless multi-line attribute values persist below R2018
Two review findings on the multi-line-attribute paths of block_explode / block_set_attributes. COM: `_add_mtext_from_capture` wrote `InsertionPoint` before `AttachmentPoint`. ActiveX's `AttachmentPoint` keeps the text body where it is and relocates the anchor, so every non-TopLeft attribute was laid out TopLeft-at-anchor with only the label moved (live: a BottomLeft two-line note landed two lines low, BottomRight also a box width right). The anchor is now written last, unconditionally, after the attachment and the frame. Verified live on AutoCAD 2026: every alignment's bbox matches the control and the end-to-end burst MTEXT sits at the ATTRIB's TextAlignmentPoint. The fake MTEXT now relocates `InsertionPoint` on `AttachmentPoint`/`Normal` writes the way ActiveX does, both tests assert where the anchor ended up, and the alignment test uses BottomRight rather than the default TopLeft that could never show the displacement. ezdxf: `_write_attrib_value` relied on `set_mtext`, which mirrors only the first line into `dxf.text`; below R2018 ezdxf exports no embedded MTEXT, so the default R2010 document saved `NEW ONE` where the reader had promised `NEW ONE\PNEW TWO\PNEW THREE`. `dxf.text` now carries the whole value (AutoCAD's own `TextString` convention) after the MTEXT rebuild; the R2010 round-trip test uses a `\P` value, and an R2018 round trip pins both surfaces. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
64cec37cc7 |
fix(task-22): ucs_list decides "world" from the frame, not the empty name — an unnamed UCS is its own current row
An unnamed UCS (UCS Origin / 3P without saving, the common kind) has an empty UCSNAME exactly like WCS does, so both engines answered `current: world` while the drawing was not in WCS — verified live on AutoCAD 2026 (`_.UCS _O 10,10,0` → UCSNAME="" WORLDUCS=0) and on the DXF it writes ($UCSNAME='' $UCSORG=(0,20,0)). A silent wrong value. - COM: a named match still wins; otherwise WORLDUCS (AutoCAD's own answer) decides, and WORLDUCS=0 appends a `name: None` row built from UCSORG/UCSXDIR/UCSYDIR. - ezdxf: the same rule against $UCSORG/$UCSXDIR/$UCSYDIR via the new `engineering.environment.ucs.is_world_axes`; a stale $UCSNAME falls back to the frame instead of leaving no row current. - Server `ucs_list` result: `current` is null for an unnamed UCS (never `world`), plus `current_unnamed: bool` so null is unambiguous. - Tests: helper, headless (unnamed row, stale name, and the exact AutoCAD DXF over the wire), and COM fake reading WORLDUCS + the frame variables. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
e7dafb85ab |
fix(task-2): headless block_set_attributes rewrites the embedded MTEXT; block_explode refuses members ezdxf would silently drop
Two review findings on the headless engine, both content lost with ok: True. Multi-line attribute writer: `block_set_attributes` set only `attrib.dxf.text`, so after an edit `block_get_attributes` reported the new value while `block_explode` (`_burst_attrib`) burst the embedded MTEXT at its pre-edit content -- and on the default R2010 document, where ezdxf exports no embedded MTEXT, a save/reload carried the new value the exploded drawing never showed. `_write_attrib_value` now rebuilds the embedded MTEXT from its own virtual entity with the new content (`virtual_mtext_entity()` + `set_mtext(..., graphic_properties=False)`, the round trip ezdxf's `BaseAttrib.transform` uses), keeping placement, style and height; `_attrib_value` reports the embedded MTEXT's full `Line1\PLine2` content for a multi-line attribute, as AutoCAD's `TextString` does, so get / set / explode / COM agree. Opaque members: `block_explode` iterated `virtual_entities()` without a `skipped_entity_callback`, so ezdxf dropped every member it cannot copy (OLE2FRAME) or transform (VIEWPORT) with a debug log, an ACAD_PROXY_ENTITY without proxy graphics contributed nothing, and the reference was then deleted. `_explodable_members` materializes the list before any write and refuses by member with the typed capability `explode_opaque_members` (declared on both engines: headless False with the reason, COM native), naming the block and the live way out. The block_explode docstrings (backend and tool) now state this refusal instead of claiming the xref/MINSERT gate covered everything. Tests: eight new headless cases in tests/test_track_a_hardening.py -- the multi-line reader, the rewrite (value on every surface, placement unchanged, clean audit), a `\P` value and the empty value, an R2010 save/reload, the single-line path unchanged, the opaque-member refusal (nothing written, reference alive, members named), an ordinary block still exploding under a uniform scale, and the capability declared on both engines. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
f2386a9fdd |
fix(task-17): a rotated sheet's margins turn with it, and a paper-units move is named in changed and warnings
Finding 1: page_setup_list swapped size_mm for plot_rotation 1/3 but reported the margins un-turned, so a 297 x 210 sheet carried its portrait margins ([20, 20, 7.5, 7.5], printable 282 x 170) while ezdxf's Page and _paper_frame plotted [7.5, 7.5, 20, 20] (257 x 195). The mapping now lives once in papers.turned_sheet (cross-checked against Page.from_dxf_layout for all four rotations) and is used by the ezdxf row, _paper_frame and the COM row. page_setup_apply resets plot_rotation to 0; headlessly it now re-writes the turned margins un-turned so the sheet keeps the margins it had (nothing moves, changed says nothing), and on COM, where margins come from the .pc3, the ones that moved show up in changed. Finding 2: both engines forced plot paper units to millimetres with no units field in the row, so an inch-authored ANSI sheet was rescaled 25.4x with ok: True and changed naming only the media. Rows now carry paper_units (mm | inches | pixels, DXF group 72 / AcPlotPaperUnits); resolve_page_setup takes paper_units="mm" (default) | "inches" | None (keep the layout's units, as AutoCAD's own Page Setup does); a move is reported in changed and, with its 25.4x consequence and the way back, in the new warnings list (papers.page_setup_warnings, identical on both engines). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
6cb7a13c66 |
fix(task-2): block_explode bursts multi-line attributes as MTEXT and refuses xrefs and MINSERTs on both engines
A multi-line ATTRIB keeps its content in an embedded MTEXT; dxf.text is only the first line (ezdxf) or "Line1\PLine2" (AutoCAD), so the TEXT the explode emitted silently dropped lines or rendered literal \P with a clean audit. ezdxf: `_burst_attrib` adds `virtual_mtext_entity()` (graphic properties and WCS placement already carried; the reference matrix applied for a constant ATTDEF) and marks it invisible like the ATTRIB. COM: `_capture_attrib` reads `MTextAttribute` / `MTextAttributeContent` / `MTextBoundaryWidth` and `_add_mtext_from_capture` goes through `AddMText` (height, style, frame, then Rotation, then the attachment mapped from the ATTRIB's Alignment). Two INSERT kinds `virtual_entities()` cannot explode were destroyed with ok: True: an xref (no virtual entities, reference deleted) and a MINSERT (only the first cell resolved, the rest of the grid gone). Both are now refused by name before any write, on both engines (`block_record.is_xref` / `mcount > 1` headless; `Blocks.Item(Name).IsXRef` / `AcDbMInsertBlock` live, the latter previously failing the INSERT check with the misleading "not a block reference"). Tests: nine new cases in tests/test_track_a_hardening.py (headless multi-line ATTRIB and constant ATTDEF, xref and MINSERT refusals, a single-cell grid that still explodes; COM multi-line capture, frame-before-angle, and both named refusals). The fake ActiveX surface gains AddMText and IsXRef. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
4bf686e943 |
fix(task-22): headless named views are written as plan views and restore carries the orientation
ezdxf's VIEW default is direction=(1, 1, 1) — an isometric view — so every named view the headless engine wrote to disk was oblique while the tool claimed to store the plan window of center/height; AutoCAD restored it in that DCS. view_named_save now writes direction (0,0,1), target (0,0,0) and view_twist 0 explicitly. view_named_restore copies direction/target/twist from the VIEW into the *Active VPORT instead of flattening a foreign oblique view to plan, reading the attributes the way the file carries them (ezdxf forces those tags on export). Measured live on AutoCAD 2026: Views.Add already creates a plan view, so the COM path only gains a note. Tests: the VIEW entry and the reopened DXF assert 11/21/31 = 0/0/1 and the target; a hand-built oblique, twisted VIEW restores its orientation into the VPORT and a tool-saved view puts it back on plan. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
b12fa854c1 |
fix(task-2): block_explode writes Normal as a VARIANT and keeps constant attributes as TEXT
COM: ``text.Normal`` was a plain Python tuple, which ActiveX marshals as VT_ARRAY|VT_VARIANT and refuses with E_INVALIDARG (verified live on AutoCAD 2026); because the write came after Explode(), the ATTDEF deletes and AddText, the tool raised and left the drawing torn. It now goes through ``_apoint`` like every other point write, and the fake ActiveX surface refuses a bare tuple on Normal/InsertionPoint/TextAlignmentPoint so a test cannot pin the wrong call shape again. COM: every AcDbAttributeDefinition Explode() returned was deleted, but GetAttributes() excludes constant attributes, so a constant attribute's only visible text was destroyed with ok: True. A constant ATTDEF from the explode (Constant member, or its tag in GetConstantAttributes()) is now captured like an ATTRIB and replaced by a TEXT; placeholders are still just deleted. ezdxf: an AutoCAD-authored reference carries no ATTRIB for a constant attribute and virtual_entities() skips ATTDEF, so the same text vanished headlessly. A constant ATTDEF whose tag has no attached ATTRIB becomes a TEXT transformed by the reference matrix, the path add_auto_attribs takes, and is not converted twice when block_insert did attach one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
33604c4408 |
fix(task-14): read and write system variables on the ActiveX document, not the Application
`system_get_variable` / `system_set_variable` called `GetVariable` /
`SetVariable` on the object `_acad_app()` returns. Those are `AcadDocument`
members; `AcadApplication` has neither, so on a live seat every call died
with `AttributeError: AutoCAD.Application.GetVariable` before anything
reached AutoCAD -- `drawing_settings` (all keys, read and write) was dead on
the COM engine although both engines were promised. Measured on AutoCAD
2026: `hasattr(app, "GetVariable")` is False. Both methods now resolve the
document through `_acad_doc()`, whose "No drawing is open" refusal is what a
seat without a document reports. Verified live through `ComBackend`:
LIMMAX reads (277.0, 202.5); `drawing_settings({"annotation_scale": "1:50",
"polar_angle": 45, "polar": True})` applies and reads back 1:50 / 0.02 /
45.0 / True in model space.
The test fake shipped with the task had GetVariable / SetVariable on the
*Application*, so the gate asserted a call shape the real object does not
have. `_FakeApp` now carries only `ActiveDocument` + `Documents.Count` and
raises `AttributeError` for the two names, exactly like the real
Application; the sysvar store is a `_FakeDoc` that the real `_acad_doc()`
resolves. Two regression tests: the document is the target (call list), and
no open drawing raises the clear RuntimeError. The older
`tests/test_com_sprint3.py` coercion test pinned the same wrong target and
now fakes the document.
`tests/test_com_backend.py::_measure_backend` replaced the module-level
`_acad_doc` without ever restoring it, so a MagicMock document leaked into
every later test of the session -- invisible while nothing downstream
resolved the document itself, fatal once the sysvar path did. An autouse
fixture in that module restores it.
Not touched (same root cause, other owners): `app.GetVariable` /
`app.SetVariable` in `_ensure_linetype_loaded`, `drawing_info`,
`drawing_audit`, `system_run_command` and `system_run_lisp` in
backends/com_backend.py.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
dcc8f07bf4 |
feat(environment): portable layer states, named views and UCS on both engines
Layer states are ACADMCP_LAYERSTATES XRECORD chunks (<= 255 ASCII chars each), in the file and not in AutoCAD's Layer States Manager. Headless view restore writes the *Active VPORT (ezdxf's header has no $VIEWCTR; measured). UCS is stored and made current; tool coordinates stay WCS. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
376dc812a5 |
fix(task-17): COM page setup reads mm as mm, 1:5 takes the custom route, and a refused apply puts the media back
Three live-measured behaviours of AutoCAD 2026 that the fake did not replay: * GetPaperSize / GetPaperMargins answer in millimetres whatever PaperUnits says; the 25.4 factor listed every imperial layout as [10668.0, 7543.8] and lost the paper name. No factor now; the fake pins PaperUnits=0. * Layout.StandardScale = 19 (ac1_5) is refused with "Invalid input" in every condition; '1:5' is dropped from ACTIVEX_PLOT_SCALE so it goes through SetCustomScale(1, 5) like 5:1 already did. * Writing ConfigName replaces CanonicalMediaName with the new device's default, and writing the old device back does not bring the media back — the unknown-media refusal and a late refusal both left the layout on the old device's default paper while the error claimed it was restored. The device write now snapshots media / units / rotation and journals one combined undo; the read-back after every unwind is compared to the read-back before the first write and the message names what did not go back instead of asserting it did. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
cc3bd4876b |
feat(styles): dimension, text and multileader styles on both engines; $DIMSTYLE/$TEXTSTYLE reach new entities headlessly
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
415de73137 |
fix(task-2): COM block_explode carries the ATTRIB frame and style onto the TEXT
The BURST path on the live engine read TextString/InsertionPoint/Height/ Rotation/Layer/Invisible and nothing else, so the +Z TEXT that AddText builds got the ATTRIB's OCS Rotation with no Normal: a mirrored reference's tag (Normal (0,0,-1), the same premise the ezdxf regression pins) came back reading theta instead of 180deg-theta, un-mirrored, on the wrong side of its anchor at theta=0, with ok: True. Style members (StyleName, ObliqueAngle, ScaleFactor, Backward/UpsideDown, Alignment + TextAlignmentPoint, Color) were dropped the same way. _capture_attrib_text_members reads the ActiveX twins of the headless _ATTRIB_TO_TEXT carry, guarded per member and never written as a guess; a +Z Normal is not carried and a left-aligned ATTRIB drops its TextAlignmentPoint (ActiveX refuses it). Writes go Normal/Thickness/ style -> Rotation -> InsertionPoint re-asserted in WCS when the frame changed -> Alignment -> TextAlignmentPoint -> Layer -> Color -> Visible. Two fake-surface tests: the mirrored/styled ATTRIB pins every write and the Normal-before-Rotation and Normal-before-InsertionPoint order; the bare ATTRIB pins that absent members are skipped. Both fail on the previous commit. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
20ca39d28a |
fix(task-17): a layout plot never writes CenterPlot, and a refused COM write unwinds every landed one
The ActiveX Reference (CenterPlot Property, acadauto.chm, AutoCAD 2026):
"This property cannot be set to True on a layout object whose PlotType
property is set to acLayout." The shipped sequence wrote PlotType=5 and
then CenterPlot=True for the *default* call, so page_setup_apply(layout,
resolve_page_setup("ISO_A3")) could not succeed live — either COM raised
with nine writes landed and nothing put back, or the result claimed
applied.center=True over a read-back of False.
- resolve_page_setup resolves `center` to None for plot_area="layout"
(validated as a bool first; kept as the bool for "extents"), and
`center_applies(plot_type)` carries the rule for both read-backs.
- Both engines: page_setup_list reports `center: None` under acLayout
instead of a stored flag nothing honours; apply never sets the centre
bit / CenterPlot for a layout plot (ezdxf clears bit 4, the state
AutoCAD stores for acLayout; COM clears a stale CenterPlot=True *before*
PlotType moves to acLayout, and writes CenterPlot for an extents plot
only *after* PlotType=acExtents).
- COM: every write is journaled and unwound in reverse when AutoCAD
refuses one; the ValueError names the refused property and says the
layout was restored (or what could not be). The old device-only
rollback is the same mechanism now.
- tests: the fake enforces the documented CenterPlot rule (the shipped
sequence fails under it, which is the reviewer's repro), and can refuse
a named property; new cases pin the no-write, the ordering both ways,
the reverse unwind including SetCustomScale, and the None read-backs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
df2ab91900 |
fix(task-14): return the plain point list from COM system_set_variable, not the VARIANT
The tuple/list branch put the win32com VARIANT built for SetVariable into the
returned dict. The system_set_variable tool returns that dict verbatim under
output_schema {"type": "object"}; pydantic cannot serialise a VARIANT, FastMCP
drops the structured content and the client sees "outputSchema defined but no
structured output returned" -- after AutoCAD had already applied the write, so
every raw point-variable write (LIMMIN, LIMMAX, GRIDUNIT, SNAPUNIT, INSBASE)
was a retry/undo trap on the live engine while the audit log said TOOL OK.
The VARIANT is now only the SetVariable argument; "value" carries the
coerced Python list. The fake-ActiveX test asserts the reply, and a new
Client(server.mcp) test drives the tool through the output schema so the
serialisation path is covered.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
13851a3d20 |
fix(task-2): block_explode keeps the ATTRIB frame and writes into the owner layout
Two silent wrong-place defects in the BURST path. An ATTRIB is an OCS entity, so the TEXT that replaces it now carries extrusion/thickness with insert/align_point; a mirrored reference (ATTRIB reflected to (0,0,-1), INSERT +Z with yscale=-1) put the tag 50 units across the mirror axis with a clean audit. Members and TEXTs now go into the INSERT's owner layout (ezdxf get_layout, COM ObjectIdToObject(OwnerID)) instead of the current space: a sheet title block exploded while Model was current duplicated geometry into model space and then died on delete_entity headless, and on COM landed the tag text in model space with ok: True. A reference nested in a block definition is refused before any write on both engines. Five regression tests (mirrored INSERT, sheet-owned INSERT with Model current, nested INSERT, and the COM owner-block / nested-refusal call shapes) fail on the previous commit and pass here. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
19610b8f05 |
fix(blocks): block_explode keeps attribute text as TEXT (BURST rule) on both engines
virtual_entities() yields geometry only, so an exploded tagged symbol lost its tag value silently. Every attached ATTRIB now becomes a TEXT at the same WCS placement/height/rotation/style/layer (invisible stays invisible), reported as attribute_texts. COM reads GetAttributes before Explode, deletes the ATTDEF placeholders Explode returns, AddText per value, and deletes the reference ActiveX Explode leaves behind. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |