flatten_bulges chops a semicircle into an even number of chords (36 for
r=50, 12 for r=5), so a flattened vertex lands exactly on the apex — the
axis of symmetry, the one place a P&ID line most plausibly meets a
crossing jump. segments_cross treats a vertex hit as a junction, so both
neighbouring chords dropped it and the arc contributed 0: the (45,0)->(55,0)
bulge -1 jump reported crossings 0 at x=50 and 1 at x=50.3 or x=49, the
plan's own (0,0)->(100,0) semicircle 0 at x=50, and the mirrored frame
(extrusion -Z) 0 at x=-50.
count_crossings now takes bulges= (per-chain DXF bulge lists, zero-padded)
and tests every bulged edge as its exact arc through the new
segment_arc_crossings — circle/segment intersection restricted to the
sweep — with the same junction rule as the straight case: a hit within
_EPS of the segment's ends, of the arc's own two ends, or a tangent, is
not a crossing. Nothing along the sweep is a vertex any more. The arc
parametrisation is factored into _arc_of_bulge and shared with
flatten_bulges, which keeps its promised signature and its ezdxf pin but
no longer feeds the crossing count. draw_line passes the vertices and
bulges through unflattened.
Pinned in tests: the apex case on the semicircle (x=50, y 20->60), the
r=5 jump at x=50 / 50.3 / 49 on +Z and -Z frames, the junction cases
(T-touch on the arc, through the arc's endpoint, chord side, tangent
along the apex, in-and-out at y=4.9 counts 2), and 4x400 seeded random
segment/arc pairs against ezdxf's ConstructionArc.intersect_line (a
20 000-case run in the worktree found 0 mismatches). The eight new
assertions fail on the flattened rule and pass on the exact one.
Headless finding, headless evidence; no new ActiveX call was written, so
the shared live AutoCAD was not touched.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
A foreign or hand-edited ACADMCP_PID payload (from: 'garbage', seq: True)
made the next pid_line_draw raise TypeError; payload_port_refs /
payload_seq now accept only well-formed values and a reader result never
raises. An existing polyline with a bulge was tested as its chord, so a
line through the arc reported crossings 0; flatten_bulges (pure, pinned
against ezdxf.math's flattening) feeds count_crossings on both engines.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
An ISA-5.1 signal line has no pipe line number, yet every pneumatic /
electric line got the bare sequence as its number and a label, and ate a
process sequence number. Signal classes now leave line_number None (a
verbatim one is still honoured), seq None, no label. A radial port aimed
at the far end even with waypoints, so the first segment cut through the
bubble; aim_points (lines.py) aims at the first/last waypoint for both
draw_line and the dry run.
Merge note: benchmarks/adapters/autocad_mcp_pro.py (final group's file)
had its two _task_pid_roundtrip assertion lines moved to the new truth —
the signal row is unnumbered, the connector row is 3.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Closes the four verified BLOCKING findings on pid_graph.
1. scope="all" attached across layouts: the port grid, bbox candidates,
vertex grid, junctions and text lookup were pooled from every space.
The grid is now keyed by (space, cell) and every lookup filters by the
edge's space; junctions carry `space`.
2. A mirrored INSERT (extrusion -Z, as MIRROR3D / foreign DXFs store it)
got its catalogue ports on the unmirrored image at 1.0. Both engines
report `mirrored` on INSERT properties (ezdxf: extrusion z < 0; COM:
Normal z < 0; default False); transform_port takes `mirrored` and
applies x -> -x about the WCS insertion point after rotation/scale,
direction (180 - d) mod 360 — cross-checked against Insert.matrix44.
resolve_endpoint passes it through too, so draw_line starts on the
mirror image as well.
3. The text-tag fallback searched a full circle around the box top, so a
line label or note below the symbol beat the tag above it. Candidates
must now sit at or above top - height/2 (spec §9.2 step 6), nearest
wins, and line-number texts are never equipment tags.
4. A non-uniform INSERT scale re-ran the transform with the X factor and
set `inferred` (reserved for foreign-block ports). transform_port
gains `strict=False` for the reader: point ports scale per axis
exactly; a radial port keeps min(sx, sy)·r and the node drops to 0.6
with notes ["non-uniform scale"]. Node dicts gain `y_scale`,
`mirrored` and `notes` (default []).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two review findings on pid_line_draw, both root-caused:
1. existing_pid_lines() filtered entity_list(type_filter="LWPOLYLINE") and
tested info.type == "LWPOLYLINE". A live LWPOLYLINE's ActiveX ObjectName
is AcDbPolyline (the repo's own 2026-08-06 measurement), which the COM
engine reports as POLYLINE, so on live AutoCAD every auto-built number was
seq 1, crossings always 0 and port_reuse always []. The reader now lists
without a type filter and accepts {LWPOLYLINE, POLYLINE, 2DPOLYLINE} plus
LINE — the same set the Task 14 graph reader keeps. The COM _entity_info
polyline branch matched only the DXF-flavoured "AcDbLWPolyline", so a live
LWPOLYLINE never got `points` either; it now accepts both spellings (with
the OCS normalisation), which is what makes the crossing count real there.
2. resolve_endpoint() applied only x_scale, so a mirrored INSERT
(entity_mirror writes y_scale = -1) resolved its port to a point off the
symbol and the line was drawn through the pump body. transform_port takes
an optional y_scale (default: uniform, signature unchanged) and applies the
full reflect-then-rotate transform to point, direction and radius; a
stretched symbol (|x_scale| != |y_scale|) has no circle for a radial port
and is refused with a clear ValueError instead of a silent wrong number.
Tests: mirror about both axes resolves onto the real geometry, a stretched
copy is refused, and a fake-COM AcDbPolyline probe sees the existing line
with its seq, vertices and from-ref.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
