2 Commits

Include renames

Author	SHA1	Message	Date
Umut CANandClaude Opus 5	bf8b3baf74	fix(task-9): put the fastener plan in projection with its elevation, and refuse a thread size that is not d ... Two wrong-drawing bugs in SECTION 22. 1. _hex_points defaulted to start_deg=0, putting vertices at 3 and 9 o'clock, so the plan of an M12 hex head measured 18 mm (across flats) across the vertical while the elevation drew that same head 20.78 mm tall (across corners e, silhouette edges at +/- e/4 - the projection of a hexagon with vertices top and bottom). Place the two blocks in projection and the two views of one part disagree. The default is now 30 deg, named HEX_START_DEG and documented on both the constant and _hex_points as the convention the elevation is the projection of, so a future fourth caller cannot pick the other one by accident. The three top builders (_hex_fastener_top, _hex_nut_top, _socket_head_top) inherit it. 2. _thread_feature read the pitch from params['size'] via the ISO 261 table while drawing the geometry from params['d'], never cross-checking the two. feature_spec('thread', {'d': 8.0, 'length': 20.0, 'size': 'M20'}) drew an M8 minor diameter and returned dims['pitch'] = 2.5 with ISO 261 cited as the source - one thread's pitch on another thread's geometry, a silent wrong number carrying a standards citation. A mismatch is now refused by name, like every other check in the module. std_feature_draw's params description says so. Guard tests: the old top-view test asserted only len(points) == 6 and never a vertex coordinate, so the orientation was untested. Added the vertex coordinates, the plan-vs-elevation silhouette-height invariant across ISO 4014 / 4017 / 4032, the socket screw's dk invariant, and the refused thread pair. No ActiveX member is added or changed by either fix; both are pure geometry and validation, so no live measurement is cited. The live AutoCAD could not be probed for a confirmation run - GetActiveObject blocked past 150 s under sibling contention. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd	2026-09-22 20:02:06 +03:00
Umut CANandClaude Opus 5	84c1ef42fb	feat(task-9): SECTION 22 - std_part_list, std_part_insert, std_feature_draw ... engineering/mech/stdparts.py turns the Task 8 tables into real blocks. catalogue() searches 83 transcribed parts by designation, standard, size or family; block_spec() emits the typed primitives and DESIG/STD/SIZE/MAT ATTDEFs block_define takes, in side/top for fasteners and ISO 8826-1 simplified / ISO 8826-2 detailed for bearings; insert_std_part() defines the block once, inserts it and writes the std_part ACADMCP_MECH payload the skeleton pins, so the parts list is a read of the drawing rather than a naming convention. Threads follow ISO 6410 - minor at 0.8 x major, a thread-length limit line to the major, a three-quarter minor arc in the end view. std_feature_draw() adds a thread, a DIN 509 undercut, a DIN 471/472 groove, a DIN 332 centre hole or an ISO 3601-2 O-ring groove to geometry that already exists. Its dimensions come from the shared standards registry, never from this module: an absent table, a size outside coverage or a row missing a dimension is refused by name, and the DIN 509 relief is drawn from the profile its table publishes rather than reconstructed here. DIN 332 form R is refused outright. An unknown designation is refused with the nearest catalogue entries; nothing is drawn approximately. SECTION 22 registers the three tools in the new mech pack, with alias records (INSERT plus shop-floor synonyms in English and Turkish), a regenerated tool inventory, the README release snapshot at 207 tools in 24 groups, and the frozen group-size snapshot gaining mech: 3. Two plan corrections, both verified by running the code: * the plan's @cad_tool summaries for std_part_insert (118 chars) and std_feature_draw (130) overran discovery.serialize.MAX_SUMMARY_CHARS = 110, so tests/test_tool_registry.py::test_no_authored_summary_is_long_enough_to_be_truncated failed - they would have shipped rendered as "...". Both are shortened to 99 and 104 characters with the same content. * the plan's file list omitted tests/test_tool_packs.py, which pins the pack registry, the tool_packs report and the group count. It now carries MECH_TOOLS and distinguishes ALL_PACKS (declaration order, what "available" reports) from ALL_PACKS_ENABLED (sorted, what "enabled" reports) - those two lists stopped being the same list when "mech" was appended after "settings". No new ActiveX member is called: the module drives block_list / block_define / block_insert / entity_set_xdata / entity_create_* only. The COM path was still executed live once on AutoCAD 2026 in a scratch document created and closed by the probe: the bolt block defined with layers CENTER+GEOMETRY, attributes read back as DESIG/STD/SIZE/MAT = ISO 4014 - M12x60 / ISO 4014 / M12x60 / 8.8, the ACADMCP_MECH std_part payload round-tripped through entity_get_xdata, STD_ISO_15_6205_SIMPLIFIED inserted, and the M20 thread's three primitives landing on GEOMETRY. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd	2026-09-22 19:26:49 +03:00