pid_graph step 5 ran the TEXT label fallback for every edge without a
number. Once signal lines stopped carrying a fabricated number (3c0babf),
every pneumatic/electric run drawn by pid_line_draw entered it, and a
transmitter-to-controller run 12 mm above a labelled header came back as
line_number="100-P-1", number_source="label" — on both engines, with no
confidence field on edges to flag it.
The fallback now skips an edge that carries its own record (an
ACADMCP_PID payload: its `number: null` is the answer) and any
signal-class edge, payload or layer-classified (`signal_unknown`
included): LINE_NUMBER_RE is the pipe grammar, so a match near a signal
line always belongs to a neighbouring pipe. A foreign process line still
takes its label; a verbatim number on a signal line still reads back
from XDATA.
Tests: the finding's layout in test_pid_graph (engine-drawn signal beside
a labelled pipe, verbatim signal number, foreign electric and
signal_unknown lines beside a labelled foreign pipe) and the line_list
row in test_pid_deliverables — three of the four fail on the old reader.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Closes the four verified BLOCKING findings on pid_graph.
1. scope="all" attached across layouts: the port grid, bbox candidates,
vertex grid, junctions and text lookup were pooled from every space.
The grid is now keyed by (space, cell) and every lookup filters by the
edge's space; junctions carry `space`.
2. A mirrored INSERT (extrusion -Z, as MIRROR3D / foreign DXFs store it)
got its catalogue ports on the unmirrored image at 1.0. Both engines
report `mirrored` on INSERT properties (ezdxf: extrusion z < 0; COM:
Normal z < 0; default False); transform_port takes `mirrored` and
applies x -> -x about the WCS insertion point after rotation/scale,
direction (180 - d) mod 360 — cross-checked against Insert.matrix44.
resolve_endpoint passes it through too, so draw_line starts on the
mirror image as well.
3. The text-tag fallback searched a full circle around the box top, so a
line label or note below the symbol beat the tag above it. Candidates
must now sit at or above top - height/2 (spec §9.2 step 6), nearest
wins, and line-number texts are never equipment tags.
4. A non-uniform INSERT scale re-ran the transform with the X factor and
set `inferred` (reserved for foreign-block ports). transform_port
gains `strict=False` for the reader: point ports scale per axis
exactly; a radial port keeps min(sx, sy)·r and the node drops to 0.6
with notes ["non-uniform scale"]. Node dicts gain `y_scale`,
`mirrored` and `notes` (default []).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two verified blocking findings on pid_graph.
A foreign block's inferred ports were any line end within tolerance of
its drawn box *or strictly inside it*. A sheet border or title block is
an INSERT too, and its box encloses the whole drawing, so every end that
missed a port attached to the border instead of becoming the junction
or dangling end the tool exists to report: on a border sheet the plan's
own small P&ID read back with no junction, no dangling end and its open
signal line "connected" to A3_BORDER. The test is the boundary again, as
spec 9.2 step 3 says (within tolerance of the block's bounding-box
boundary); overshoot into a body is the tolerance's business. The
nearest-insertion tie-break stays for two boundaries that share an end.
The COM engine's `geometry_bbox` carried each definition member's own
axis-aligned box through the INSERT corner by corner, which is exact at
a right-angle rotation and too large everywhere else: a 45-degree-turned
circle of radius 5 read as 7.07, a diagonal line stood upright read 7.07
wide, and the two engines disagreed on the same drawing with no marker.
Off a right angle the member's real geometry is now measured - a LINE,
POINT and straight polyline by their vertices, a CIRCLE by the
closed-form extents of the scaled-and-turned ellipse, an ARC and a
bulged polyline by their ends and the quadrant points the sweep passes
(uniform scale, reflection reversing the sense) - and cross-checked
against ezdxf's `virtual_entities` extents at 37 and 45 degrees, scaled
and mirrored. A member that cannot be measured (text, hatch, a nested
reference, an elliptical arc) is still carried by its corners and the
box then says `approximate: true`; the graph takes the tighter wall of
that box and the attribute-inclusive `bounding_box`, both of which hold
the drawn geometry.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two verified blocking findings on pid_graph.
`_point_segment_distance` put the centre of an arc larger than a
semicircle (|bulge| > 1) on the wrong side of the chord: `copysign`
discarded the sign of `radius - sagitta`, which is exactly what carries
the centre across the chord past 180 degrees. A bulge-2 arc was tested
as its own reflection, so a line ending on its true apex dangled and one
ending on empty paper made a junction. The offset now keeps that sign
and only takes the bulge's direction from the bulge.
Foreign-block port inference tested line ends against the INSERT's
`bounding_box`, which on both engines takes the ATTRIB text with it. A
TAG lettered above a valve pushed the box past the body, so a line
ending on the body's real edge on that side was *inside* the box and
reported dangling. Both engines now report `geometry_bbox` for an
INSERT - the drawn geometry only, ATTRIB/ATTDEF excluded, in WCS, omitted
when the block draws nothing (ezdxf via `virtual_entities`, COM by
carrying each definition member's box through the INSERT's origin,
scale and rotation). The graph prefers it over `bounding_box`, counts
an end as touching when it is within tolerance of the box or inside it,
and when several foreign boxes hold the end picks the nearest insertion.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
The per-vertex `bulges` list was handed out in the entity's own frame next
to `points` that had been translated to WCS. A mirrored LWPOLYLINE
(extrusion / Normal -Z, what `entity_mirror` produces) is a reflection,
which reverses every arc's sense, so the reader tested endpoints against
the arc's mirror image: a line ending on the true apex dangled, a line
ending on empty paper made a junction, and `length` (frame-invariant)
said nothing. Both engines had it — ezdxf emitted `get_points("xyb")`
raw, COM returned `GetBulge` raw after reflecting `Coordinates`.
`ocs.wcs_bulge(extrusion, bulge)` now negates the sign for a left-handed
frame (the same rule `wcs_arc_angles` applies to an ARC's endpoints) and
both `_entity_info` paths route bulges through it whenever they translate
the points. Fenced by an end-to-end mirrored-pipe graph test, the COM
`_entity_info` fake with Normal -Z, and a boundary-level OCS test.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two reader defects, both about trusting a derived number over the drawing.
Stale junctions: endpoints were resolved before a foreign line's membership
was decided, so a P&ID line ending on a foreign line that was then discarded
(it touched no node) kept `{"junction": "J1"}` while `junctions` was empty
and `stats.dangling` was one short. Node attachment now runs first for every
edge, the foreign lines that attach are admitted, and only then are junctions
and dangling ends resolved over the edges actually in the graph.
Chord length: `length` was a chord walk over the vertices, 12.5% short on a
semicircular crossing jump with no field saying so, and junction detection
tested the chord too, so a line ending on the arc dangled. Both engines now
report per-vertex `bulges` next to `points` (COM asks GetBulge only when
`Length` exceeds the chord walk, since an arc is always longer than its
chord); the reader takes the engine's bulge-aware `length` and tests
endpoints against the arc. The chord sum survives only for an engine that
reports no length, and is then labelled `length_approximate`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
