Live AutoCAD writes a real .dwt through SaveAs(path, ac2018_Template = 66) and
puts the description into the summary Comments; headlessly a .dxf template is
written through drawing_save_as and a .dwt request is refused with capability
dwt_write, naming the DXF route and the COM route. drawing_save_as's "dwt"
entry was 5 (acR13_dxf): a DWT request wrote an R13 DXF under a .dwt name.
Probed live on AutoCAD 2026 (typelib: ac2018_Template = 66, acR13_dxf = 5,
acTemplateDwg absent; the saved file starts AC1032, the document is rebound,
Comments takes). SECTION 19 is now 6 tools; SAVEAS joins SHARED_ACAD_COMMANDS;
templates/README.md documents the two files per template.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
An ISA-5.1 signal line has no pipe line number, yet every pneumatic /
electric line got the bare sequence as its number and a label, and ate a
process sequence number. Signal classes now leave line_number None (a
verbatim one is still honoured), seq None, no label. A radial port aimed
at the far end even with waypoints, so the first segment cut through the
bubble; aim_points (lines.py) aims at the first/last waypoint for both
draw_line and the dry run.
Merge note: benchmarks/adapters/autocad_mcp_pro.py (final group's file)
had its two _task_pid_roundtrip assertion lines moved to the new truth —
the signal row is unnumbered, the connector row is 3.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
SECTION 19 grows to five tools with drawing_template_list; drawing_new takes a
bundled name (iso_a3_mech, iso_a1_arch, iso_a3_pid, ansi_b_mech, ansi_d_arch)
or a .dwt/.dxf path and reports template: {name|path, path, source}.
scripts/build_templates.py builds templates/*.dxf through EzdxfBackend
(layer set, header DIM variables until group S's styles land, drawing_settings,
sheet tab, ISO 5457 frame on A3, page_setup_apply) and --check pins them
reproducible. One drift the plan's same-process measurement could not see is
fixed at the source rather than masked: ezdxf orders CLASSES by set iteration,
so two processes disagreed on LAYOUT / ACDBPLACEHOLDER; the section is re-keyed
(required list first, then by name) before the save.
The root .gitignore ignores *.dxf as generated output; templates/*.dxf is
un-ignored there, since the bundled set is the one DXF that is committed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
user_pick_point / user_select answer {cancelled: true} on ESC (DISP_E_EXCEPTION)
and {timed_out: true} past COM_CALL_TIMEOUT; preferences_set refuses read-only,
unknown and out-of-range keys before any ActiveX call.
The read-only key is Files.PrinterStyleSheetPath, not the spec's
PrintStyleSheetPath: IAcadPreferencesFiles has no member of that name
(measured live on AutoCAD 2026 / R25.1), and a misspelt key would make
preferences_get() raise on every live call.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Summary fields are refused headlessly with capability dwgprops before any
write; custom properties are $CUSTOMPROPERTYTAG/$CUSTOMPROPERTY pairs and
survive save + reopen. Validation is shared, by name, and never str()-coerces.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
90 authored rows (type, range/enum, default, meaning, saved-in, per-engine
support, friendly key); every ezdxf claim is checked against the real
backend and the registry-saved set is pinned to what the backend refuses.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Layer states are ACADMCP_LAYERSTATES XRECORD chunks (<= 255 ASCII chars each),
in the file and not in AutoCAD's Layer States Manager. Headless view restore
writes the *Active VPORT (ezdxf's header has no $VIEWCTR; measured). UCS is
stored and made current; tool coordinates stay WCS.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
virtual_entities() yields geometry only, so an exploded tagged symbol lost
its tag value silently. Every attached ATTRIB now becomes a TEXT at the
same WCS placement/height/rotation/style/layer (invisible stays
invisible), reported as attribute_texts. COM reads GetAttributes before
Explode, deletes the ATTDEF placeholders Explode returns, AddText per
value, and deletes the reference ActiveX Explode leaves behind.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
EnvironmentContract carries every member of the track E interface; the two
drawing_properties_* members are @capability('dwgprops') in this worktree only
and become @abstractmethod when group C's implementations merge.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Headlessly, grid/snap are stored on the active VPORT, CANNOSCALE in
AcDbVariableDictionary (+ an ACAD_SCALELIST entry), and LIMMIN/LIMMAX on
the model-space layout as well as the header — measured: the header alone
is overwritten at save. Registry-saved variables (AUTOSNAP, POLARANG, …)
are refused with capability registry_sysvar instead of vanishing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Tool count 131 -> 154; 474 -> 1242 collected tests.
The release exists for two measured reasons. A 149-tool catalog costs a client
~40,300 tokens before it has asked for anything, and a drafter searching the way
drafters think -- FILLET, BPOLY, QSELECT, WBLOCK -- scored df=0 against the stock
index, because those words were simply not in the data.
Discovery and batching
- DISCOVERY_MODE=search replaces the catalog with search_tools + call_tool,
ranked over an AutoCAD command and synonym corpus (discovery/aliases.py) on
top of fastmcp's BM25 index. Measured: 40,305 -> 356 tokens advertised.
- cad_batch runs a step list in one round trip; fields= projects result-heavy
responses. The `core` profile is gone -- discovery replaced it.
Honesty debt (Tier 0)
- OCS/ECS: `extrusion` appeared nowhere in this codebase, so mirrored and
rotated geometry reported coordinates that were quietly wrong. backends/ocs.py
translates at the backend boundary; every tool coordinate is WCS on both
engines, and a tilted plane refuses rather than answering with a number that
looks fine.
- drawing_save_as(fmt="dwg") wrote DXF bytes to a .dwg path. drawing_audit never
repaired. analysis_measure_area shoelaced points the caller typed in.
- ezdxf calls gained a per-call timeout, so one hung call can no longer wedge a
server whose document lock is a single asyncio.Lock.
Architecture
- The 1854-line backend ABC is 19 contract modules; @capability(key, reason=)
makes optional methods declarative and a gate fails on undeclared holes.
- 8 layout/viewport tools, CHSPACE, CAD_PROGID escape hatch.
- Wave A: selection filters, boundary tracing, hatch depth, annotation objects,
measurement -- 13 tools of a planned 39. The REGION and 2D-boolean family was
cut on evidence: add_region() yields zero ACIS bytes and the greiner_hormann
substitute loses 28.2% of the area on a square with one semicircular edge.
Verified against a live AutoCAD 2026, which found four COM defects no amount of
reading would have caught -- AcadPViewport has no ViewCenter, and the line that
set it had been swallowed by a bare except since v1.4.
Benchmark v3 (15 tasks) and what it caught
- v2 scored this server 10/10, which carried no information: every task in it
exercised something the server was built around. Five tasks were added because
they can fail, and three did while being written -- a hatch could not be
measured though the refusal listed HATCH as measurable, the boundary tools and
the measure tool disagreed about the same shape (139.2177 vs 139.2699), and a
circle stored as two bulged vertices measured 0.0.
- Competitor reports are NOT re-scored. They are pinned v1.4 runs against v2 and
were never asked these five questions; the chart shows those rows `not run`.
- Correctness A/B: 21/24 -> 24/24, zero regressions.
Performance, stated plainly
The published v1.4 perf report was recorded on CPython 3.14 and the new one on
3.11.15, so the apparent 2-6x speedup is the interpreter, not this release.
Re-measured on one interpreter, v1.5.0 is 28% slower creating entities and 22%
slower on the 10k roundtrip. Fully attributed: EZDXF_CALL_TIMEOUT=0 restores
v1.4.0's exact numbers. That is the deadlock fix being paid for, the knob is
documented, and winning it back is on the 1.6 roadmap.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
