EzdxfBackend.drawing_export_pdf routed layout=None / layout="Model" through
_msp(), which follows the current tab, so with a sheet current the "Model"
PDF was that sheet's paper-space content with no refusal — the same defect
finding 3 named on COM, still live on the headless engine. Measured: circle
in model space, 390x270 rectangle on an A3 sheet, sheet current — the Model
row's /MediaBox was 176.1x121.9 mm (the rectangle) instead of 121.9x121.9
(the circle). The model target is now doc.modelspace() whichever tab is
current, on both entry points.
The test that vouched for this only asserted the row's shape (paper is None,
true by construction). It is replaced by two tests that prove content: the
Model row's mediabox with a sheet current equals the one with Model current
and carries the circle's square aspect, and drawing_export_pdf(path) with no
layout does the same. Both fail without the backend change. plot.py's
docstring now says which engine does what.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Three review findings against SECTION 19 on the live engine, each measured
on AutoCAD 2026 in a scratch document with the operator's BACKGROUNDPLOT=2:
- plot_style_list read Preferences.Files.PrintStyleSheetPath; the ActiveX
member is PrinterStyleSheetPath, so the AttributeError was swallowed and
every row came back installed=None. Renamed in the backend, the server
docstring and the test fake (which faked the same wrong name). Live: 13
rows, all 9 catalogue ctb files installed, four .stb files as installed.
- ComBackend.drawing_export_pdf returned ok before any file existed under
background plotting, so batch_plot died on path.stat() with an unhandled
FileNotFoundError and a later foreground plot raised E_FAIL. The export
now sets BACKGROUNDPLOT=0 around PlotToFile (restored after), honours the
method's bool and reports ok only with the file on disk (bytes included).
batch_plot turns a backend RuntimeError or a phantom ok into a per-row
ok:false, keeping the rows already plotted.
- With a sheet current, the Model row was that sheet plotted again: the COM
export switched tabs only when a layout was named. layout=None now makes
Model current (restoring the tab), and batch_plot names every layout,
Model included, so both engines plot the tab the row is labelled with.
Live: Model row /Title (Model) at 210x297 beside the A3 sheet, the active
tab and BACKGROUNDPLOT restored.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
`_paper_frame` computed `paper_per_unit = mm_per_unit * unit` where `unit`
is millimetres per paper unit, so an extents+fit plot on an inch sheet
reported `effective_scale: "607.06:1"` for a fit that is `1:1.06276` (off
by 25.4 squared). The render was right (`units_per_mm` is unit-free); only
the label was wrong, and it flowed into `drawing_export_pdf(layout=...)`.
The mm sheet could not see it because there `unit` is 1.
`test_extents_plot_fits_the_printable_area_and_centres` is parametrized
over ISO A3 (mm, width-bound) and ANSI B (inches, height-bound); the ink
position is derived from the centred frame so both cases check the same
invariant. The inch case fails without the fix.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two measured root causes on the headless engine, both silent:
1. page_setup_apply wrote PLOTSETTINGS group 147 (unit_factor) as 1.0 for
every scale. Under USE_STANDARD_SCALE AutoCAD's plot engine scales by
group 147 alone (a 1:10 sheet with code 21 and 147 = 1.0 plotted a
100-unit line at 99.99 mm while the row, `applied` and 142/143 said
1:10; patching 147 to 0.1 alone gave 9.99 mm). AutoCAD writes 147 as
numerator / denominator (measured live on AutoCAD 2026 for fit, 1:1,
1:2, 1:10, 1:50, 2:1, 10:1: 1.0, 1.0, 0.5, 0.1, 0.02, 2.0, 10.0). The
writer now stores 75, 142/143 and 147 from the one resolved ratio on
every route, so no reader can disagree with the plot.
2. DXF_STANDARD_SCALE_TYPE and _plot_scale followed ezdxf's STD_SCALES,
which has no 19 = 1:5 and numbers everything above 18 one lower than
the ObjectARX StdScaleType enum AutoCAD actually writes (1:10 = 21,
1:20 = 23, 1:50 = 26, 1:100 = 27, 2:1 = 28, 10:1 = 31 — measured via COM
SaveAs DXF). An AutoCAD-authored 1:50 sheet listed as "1:100" and a
1:10 sheet rendered at 1:16. papers.py now authors the full file enum
(DXF_STD_SCALES, codes 1-33 with AutoCAD's imperial names), the writer
uses the same codes ActiveX uses, and nothing goes through ezdxf's
table. 1:5 stays on the custom route on both engines (the live setter
refuses 19) while the reader knows code 19 for files AutoCAD wrote.
Tests: the plan's `1:50 -> 25` assertion was the stale numbering and now
pins 26; a pure-data test pins the enum against the measured codes and the
ActiveX numbering; a parametrised writer test checks 75/142/143/147 for
every catalogue scale; a reader test stores the scale exactly as AutoCAD
saves it (including codes 19 and 22 the writer never emits) and checks
page_setup_list and _paper_frame report and render it at its own scale.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Finding 1: page_setup_list swapped size_mm for plot_rotation 1/3 but
reported the margins un-turned, so a 297 x 210 sheet carried its portrait
margins ([20, 20, 7.5, 7.5], printable 282 x 170) while ezdxf's Page and
_paper_frame plotted [7.5, 7.5, 20, 20] (257 x 195). The mapping now lives
once in papers.turned_sheet (cross-checked against Page.from_dxf_layout
for all four rotations) and is used by the ezdxf row, _paper_frame and the
COM row. page_setup_apply resets plot_rotation to 0; headlessly it now
re-writes the turned margins un-turned so the sheet keeps the margins it
had (nothing moves, changed says nothing), and on COM, where margins come
from the .pc3, the ones that moved show up in changed.
Finding 2: both engines forced plot paper units to millimetres with no
units field in the row, so an inch-authored ANSI sheet was rescaled 25.4x
with ok: True and changed naming only the media. Rows now carry
paper_units (mm | inches | pixels, DXF group 72 / AcPlotPaperUnits);
resolve_page_setup takes paper_units="mm" (default) | "inches" | None
(keep the layout's units, as AutoCAD's own Page Setup does); a move is
reported in changed and, with its 25.4x consequence and the way back, in
the new warnings list (papers.page_setup_warnings, identical on both
engines).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
drawing_export_pdf sized the axes window as the sheet at 1:1 whatever
page_setup_apply had written: a 1:2 sheet exported pixel-identical to
the same sheet at 1:1, ok: True, with a MediaBox that read as correct,
so nothing downstream (batch_plot's mediabox gate included) could see it.
_paper_frame now spans the sheet in paper-space units — sheet_mm / unit
x denominator / numerator, the custom ratio for the labels code 75 lacks
(1:5, 5:1) — and honours the plot area: layout (5) from the plot origin;
extents (1) as the paper-space extents (the main viewport excluded, as
AutoCAD excludes it) at the plot origin or centred, scaled to the
printable area under fit. fit under a layout plot is 1:1, the choice
AutoCAD greys out. display/view/limits/window fall back to the sheet
window and say so. The result carries scale, effective_scale,
scale_applied, plot_area, plot_area_applied (and plot_area_note), the
way rotation_applied is already reported.
Tests look at the ink, since the MediaBox cannot see this: an 800-unit
frame ends at (left + 400) / 420 of the width at 1:2 and runs off the
sheet at 1:1; extents + fit spans the printable width exactly; the
custom 1:5 window is 2100 units; an empty extents plot and a display
plot are reported, not hidden.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Three live-measured behaviours of AutoCAD 2026 that the fake did not replay:
* GetPaperSize / GetPaperMargins answer in millimetres whatever PaperUnits
says; the 25.4 factor listed every imperial layout as [10668.0, 7543.8]
and lost the paper name. No factor now; the fake pins PaperUnits=0.
* Layout.StandardScale = 19 (ac1_5) is refused with "Invalid input" in every
condition; '1:5' is dropped from ACTIVEX_PLOT_SCALE so it goes through
SetCustomScale(1, 5) like 5:1 already did.
* Writing ConfigName replaces CanonicalMediaName with the new device's
default, and writing the old device back does not bring the media back —
the unknown-media refusal and a late refusal both left the layout on the
old device's default paper while the error claimed it was restored. The
device write now snapshots media / units / rotation and journals one
combined undo; the read-back after every unwind is compared to the
read-back before the first write and the message names what did not go
back instead of asserting it did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
The ActiveX Reference (CenterPlot Property, acadauto.chm, AutoCAD 2026):
"This property cannot be set to True on a layout object whose PlotType
property is set to acLayout." The shipped sequence wrote PlotType=5 and
then CenterPlot=True for the *default* call, so page_setup_apply(layout,
resolve_page_setup("ISO_A3")) could not succeed live — either COM raised
with nine writes landed and nothing put back, or the result claimed
applied.center=True over a read-back of False.
- resolve_page_setup resolves `center` to None for plot_area="layout"
(validated as a bool first; kept as the bool for "extents"), and
`center_applies(plot_type)` carries the rule for both read-backs.
- Both engines: page_setup_list reports `center: None` under acLayout
instead of a stored flag nothing honours; apply never sets the centre
bit / CenterPlot for a layout plot (ezdxf clears bit 4, the state
AutoCAD stores for acLayout; COM clears a stale CenterPlot=True *before*
PlotType moves to acLayout, and writes CenterPlot for an extents plot
only *after* PlotType=acExtents).
- COM: every write is journaled and unwound in reverse when AutoCAD
refuses one; the ValueError names the refused property and says the
layout was restored (or what could not be). The old device-only
rollback is the same mechanism now.
- tests: the fake enforces the documented CenterPlot rule (the shipped
sequence fails under it, which is the reviewer's repro), and can refuse
a named property; new cases pin the no-write, the ordering both ways,
the reverse unwind including SetCustomScale, and the None read-backs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
AutoCAD stores ISO A4 landscape as 210 x 297 media with plot_rotation 1;
paper-space X then runs along the 297 mm side. _paper_frame turned the
figure but not the axes window, so a 297 x 210 page carried a 210-wide data
window; set_aspect("equal") shrank the axes box to 0.707 and everything past
x = 210 minus the margin was cut, with ok: True and a MediaBox that read as
correct. The window now takes the turned size, and the margins turn with it
the way ezdxf's own Page.from_dxf_layout maps them (rotation 2 included).
Test: a rotated layout with a 277 mm frame exported to PNG; the ink must
reach the right of the sheet (it stopped at column 1314/1753, now 1752),
and the MediaBox still reads 297 x 210.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Closes the four verified BLOCKING findings on pid_graph.
1. scope="all" attached across layouts: the port grid, bbox candidates,
vertex grid, junctions and text lookup were pooled from every space.
The grid is now keyed by (space, cell) and every lookup filters by the
edge's space; junctions carry `space`.
2. A mirrored INSERT (extrusion -Z, as MIRROR3D / foreign DXFs store it)
got its catalogue ports on the unmirrored image at 1.0. Both engines
report `mirrored` on INSERT properties (ezdxf: extrusion z < 0; COM:
Normal z < 0; default False); transform_port takes `mirrored` and
applies x -> -x about the WCS insertion point after rotation/scale,
direction (180 - d) mod 360 — cross-checked against Insert.matrix44.
resolve_endpoint passes it through too, so draw_line starts on the
mirror image as well.
3. The text-tag fallback searched a full circle around the box top, so a
line label or note below the symbol beat the tag above it. Candidates
must now sit at or above top - height/2 (spec §9.2 step 6), nearest
wins, and line-number texts are never equipment tags.
4. A non-uniform INSERT scale re-ran the transform with the X factor and
set `inferred` (reserved for foreign-block ports). transform_port
gains `strict=False` for the reader: point ports scale per axis
exactly; a radial port keeps min(sx, sy)·r and the node drops to 0.6
with notes ["non-uniform scale"]. Node dicts gain `y_scale`,
`mirrored` and `notes` (default []).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two verified blocking findings on pid_graph.
A foreign block's inferred ports were any line end within tolerance of
its drawn box *or strictly inside it*. A sheet border or title block is
an INSERT too, and its box encloses the whole drawing, so every end that
missed a port attached to the border instead of becoming the junction
or dangling end the tool exists to report: on a border sheet the plan's
own small P&ID read back with no junction, no dangling end and its open
signal line "connected" to A3_BORDER. The test is the boundary again, as
spec 9.2 step 3 says (within tolerance of the block's bounding-box
boundary); overshoot into a body is the tolerance's business. The
nearest-insertion tie-break stays for two boundaries that share an end.
The COM engine's `geometry_bbox` carried each definition member's own
axis-aligned box through the INSERT corner by corner, which is exact at
a right-angle rotation and too large everywhere else: a 45-degree-turned
circle of radius 5 read as 7.07, a diagonal line stood upright read 7.07
wide, and the two engines disagreed on the same drawing with no marker.
Off a right angle the member's real geometry is now measured - a LINE,
POINT and straight polyline by their vertices, a CIRCLE by the
closed-form extents of the scaled-and-turned ellipse, an ARC and a
bulged polyline by their ends and the quadrant points the sweep passes
(uniform scale, reflection reversing the sense) - and cross-checked
against ezdxf's `virtual_entities` extents at 37 and 45 degrees, scaled
and mirrored. A member that cannot be measured (text, hatch, a nested
reference, an elliptical arc) is still carried by its corners and the
box then says `approximate: true`; the graph takes the tighter wall of
that box and the attribute-inclusive `bounding_box`, both of which hold
the drawn geometry.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two verified blocking findings on pid_graph.
`_point_segment_distance` put the centre of an arc larger than a
semicircle (|bulge| > 1) on the wrong side of the chord: `copysign`
discarded the sign of `radius - sagitta`, which is exactly what carries
the centre across the chord past 180 degrees. A bulge-2 arc was tested
as its own reflection, so a line ending on its true apex dangled and one
ending on empty paper made a junction. The offset now keeps that sign
and only takes the bulge's direction from the bulge.
Foreign-block port inference tested line ends against the INSERT's
`bounding_box`, which on both engines takes the ATTRIB text with it. A
TAG lettered above a valve pushed the box past the body, so a line
ending on the body's real edge on that side was *inside* the box and
reported dangling. Both engines now report `geometry_bbox` for an
INSERT - the drawn geometry only, ATTRIB/ATTDEF excluded, in WCS, omitted
when the block draws nothing (ezdxf via `virtual_entities`, COM by
carrying each definition member's box through the INSERT's origin,
scale and rotation). The graph prefers it over `bounding_box`, counts
an end as touching when it is within tolerance of the box or inside it,
and when several foreign boxes hold the end picks the nearest insertion.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
The per-vertex `bulges` list was handed out in the entity's own frame next
to `points` that had been translated to WCS. A mirrored LWPOLYLINE
(extrusion / Normal -Z, what `entity_mirror` produces) is a reflection,
which reverses every arc's sense, so the reader tested endpoints against
the arc's mirror image: a line ending on the true apex dangled, a line
ending on empty paper made a junction, and `length` (frame-invariant)
said nothing. Both engines had it — ezdxf emitted `get_points("xyb")`
raw, COM returned `GetBulge` raw after reflecting `Coordinates`.
`ocs.wcs_bulge(extrusion, bulge)` now negates the sign for a left-handed
frame (the same rule `wcs_arc_angles` applies to an ARC's endpoints) and
both `_entity_info` paths route bulges through it whenever they translate
the points. Fenced by an end-to-end mirrored-pipe graph test, the COM
`_entity_info` fake with Normal -Z, and a boundary-level OCS test.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two reader defects, both about trusting a derived number over the drawing.
Stale junctions: endpoints were resolved before a foreign line's membership
was decided, so a P&ID line ending on a foreign line that was then discarded
(it touched no node) kept `{"junction": "J1"}` while `junctions` was empty
and `stats.dangling` was one short. Node attachment now runs first for every
edge, the foreign lines that attach are admitted, and only then are junctions
and dangling ends resolved over the edges actually in the graph.
Chord length: `length` was a chord walk over the vertices, 12.5% short on a
semicircular crossing jump with no field saying so, and junction detection
tested the chord too, so a line ending on the arc dangled. Both engines now
report per-vertex `bulges` next to `points` (COM asks GetBulge only when
`Length` exceeds the chord walk, since an arc is always longer than its
chord); the reader takes the engine's bulge-aware `length` and tests
endpoints against the arc. The chord sum survives only for an engine that
reports no length, and is then labelled `length_approximate`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two review findings on pid_line_draw, both root-caused:
1. existing_pid_lines() filtered entity_list(type_filter="LWPOLYLINE") and
tested info.type == "LWPOLYLINE". A live LWPOLYLINE's ActiveX ObjectName
is AcDbPolyline (the repo's own 2026-08-06 measurement), which the COM
engine reports as POLYLINE, so on live AutoCAD every auto-built number was
seq 1, crossings always 0 and port_reuse always []. The reader now lists
without a type filter and accepts {LWPOLYLINE, POLYLINE, 2DPOLYLINE} plus
LINE — the same set the Task 14 graph reader keeps. The COM _entity_info
polyline branch matched only the DXF-flavoured "AcDbLWPolyline", so a live
LWPOLYLINE never got `points` either; it now accepts both spellings (with
the OCS normalisation), which is what makes the crossing count real there.
2. resolve_endpoint() applied only x_scale, so a mirrored INSERT
(entity_mirror writes y_scale = -1) resolved its port to a point off the
symbol and the line was drawn through the pump body. transform_port takes
an optional y_scale (default: uniform, signature unchanged) and applies the
full reflect-then-rotate transform to point, direction and radius; a
stretched symbol (|x_scale| != |y_scale|) has no circle for a radial port
and is refused with a clear ValueError instead of a silent wrong number.
Tests: mirror about both axes resolves onto the real geometry, a stretched
copy is refused, and a fake-COM AcDbPolyline probe sees the existing line
with its seq, vertices and from-ref.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
encode_values() let strings and nan/inf through float() into 1010 point
coordinates and never finiteness-checked bare 1040 reals, so
entity_set_xdata(handle, app, [["nan", 1]]) or [float("inf")] wrote a
literal "nan"/"inf" into the DXF (and every undo snapshot) and read back
as null. Numbers now go through the same rule block_specs._scalar applies:
int/float only, bool refused, math.isfinite, error naming values[i][j].
The advertised 16 KB limit was per call per app; AutoCAD's is per object
across every application (xdroom/xdsize), so three 15 KB apps on one
entity passed headless and would fail SetXData live. check_entity_budget()
now sums the entity's existing XDATA under every other app (ACAD's DSTYLE
overrides included) plus each 1001 marker with AutoCAD's resbuf sizes,
and both engines run it before registering the APPID or writing; removal
is never refused. The result's "bytes" is that same accounting.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
encode_values() accepted strings containing "\n" or "\r". ezdxf writes
1000-tag values verbatim, so the separator split the tag pair: the saved
DXF failed to reopen (DXFStructureError) and, because every undo and
transaction snapshot is also a DXF save, transaction_rollback broke after
a single such write. Both engines route through encode_values, so the
refusal (ValueError naming values[i]) now happens there, before either
backend touches the document. Only LF and CR split a DXF tag; tabs and
the other Unicode separators round-trip and stay allowed.
Tests: pure encoder refusal for \n, \r, \r\n; other control characters
still typed; ezdxf refuses-then-rollback-and-reopen round trip; COM fake
sees no SetXData / RegisteredApplications call.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
`text`, ATTDEF `prompt` and `default` were only isinstance(str)-checked, so
'A\nB' and '10^' passed validation and ezdxf's DXFAttr fixer
(`fix_one_line_text`) rewrote them on `add_text` / `add_attdef` at DEBUG
log level — the declared ATTRIB value and the one the P&ID reader gets back
differed silently, and COM (raw string) diverged from ezdxf. Same hole the
tag check closed in 4158575, left open on its three siblings.
A `_one_line(value, where)` helper now refuses '\n', '\r', any other C0
control, and a trailing '^' (ezdxf's own `is_valid_one_line_text` rule),
naming `entities[i]: 'text'` / `attdefs[i]: 'prompt'|'default'`. Tests cover
the refusals, the strings ezdxf keeps verbatim ('10^2', 'Ø20 H7', '%%C20'),
and an ezdxf round-trip proving accepted values are stored unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two ways a malformed block_define request slipped past the pre-write
validator and reached the engine:
* `ATTDEF_TAG_RE.match` with a `$` anchor accepts 'TAG\n' because `$`
matches before a trailing newline. ezdxf strips the newline on write, so
'TAG\n' + 'TAG' landed as two ATTDEFs with one tag, defeating the
duplicate-tag refusal, and the tag-keyed attribute readers then dropped
one silently. Now `fullmatch`.
* `_layer` only required a non-empty string, so a DXF-illegal name such as
'BAD<LAYER' passed and ezdxf raised DXFValueError mid-loop, after the
block existed and earlier primitives were written (with overwrite=True,
after the old definition was already wiped). The gate now refuses on the
same forbidden-character rule `sanitize_symbol_name` uses, exposed as
`security.illegal_symbol_name_chars`, with a TypeError naming
`entities[i]` and 'layer'.
Tests cover both repros and fail against the previous code.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
`add_blockref` never checks the name and `add_auto_attribs` skips autofill
when `Insert.block()` resolves to None, so a typo'd block name returned a
handle whose attribute values were silently dropped and whose dangling
INSERT `doc.audit()` later deletes. Check `name in self._doc.blocks` and
raise `ValueError` on both the attribute and no-attribute paths, matching
the COM engine's `InsertBlock` refusal for an unknown name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Every one of these was reported ok/clean to the caller while being wrong.
Silently wrong numbers
- selection_filter(min_area) read `entity.dxf.get("area", 0.0)` for SOLID,
TRACE and HATCH, none of which carry that attribute, so every hatch
measured 0.0. A 1600 mm^2 hatch was excluded by min_area=1.0 while
`filtered_by` asserted the filter had run, and COM (which reads ActiveX
.Area) returned a different selection for the same call. It now answers
from the measurement `entity_measure` uses, so the two cannot disagree.
- Every headless dimension rendered through ezdxf's bare `Standard` style:
1.0 mm text with a comma decimal marker, against ISO 3098's 2.5 mm minimum
and ISO 129's point -- while the document header itself said $DIMTXT 2.5.
`ezdxf.new(setup=True)` is not the fix; measured, it renders a 100 mm
dimension as "10000". The attributes are now stored explicitly.
- Saving writes `dimrnd = 0.0` onto the Standard style, and ezdxf applies
`xround(value, dimrnd)` whenever the attribute is present at all --
`xround(33.333, 0.0)` is 33. So on any reopened file, including one this
server saved, every dimension was rounded to a whole unit before DIMDEC
formatted it: a 12.75 mm feature dimensioned 13. AutoCAD means DIMRND 0 as
*no* rounding; the sentinel is now discarded at every load site, and a real
0.5 mm rounding is left alone.
- The DIM* header fold gave out-of-range values teeth they did not have when
they died in the header: dim_decimals=-1 returned ok and then killed the
next dimension with `ValueError: Format specifier missing precision` from
inside ezdxf, and 40 printed forty digits of float noise onto the sheet.
Ranges are now AutoCAD's own (DIMDEC 0-8, DIMZIN 0-15, lengths positive).
Security
- security.py recorded the policy as "sanitize_command and sanitize_lisp each
have exactly ONE caller ... the policy is scoped to the CHANNEL". The
premise was false. `_ensure_linetype_loaded` and `ComBackend.linetype_load`
build `_-LINETYPE _LOAD {name} {file}` and hand it to SendCommand, which
treats a newline and ';' as segment separators -- so a `linetype=` argument
carrying either injected further AutoCAD commands, and the 36-verb denylist
never saw that channel. Guarded with the DXF symbol-name rule (the
injection characters fall out of it rather than being enumerated) plus
validate_path for the file argument, which was also the one path-taking
tool reaching the filesystem unchecked. The policy comment is corrected.
Gates that could not see
- drawing_critique returned zero issues on a quarantined document: all seven
checks wrapped their backend call in a bare `except Exception`. CLAUDE.md
rule 7 makes that call the gate an agent is told to trust. Only the
quarantine now escapes; an ordinary broken check still degrades.
`_check_dimension_legibility` also read `_doc` directly from the event loop
thread, missing the gate and performing exactly the unsynchronised access
the quarantine exists to prevent. `construction_clear` answered
"deleted: 0" -- there was nothing to clear -- for the same reason.
- The iso128 focus checked layer lineweights only, so a sheet lettered at
1.0 mm critiqued clean. It now reads the effective dimension height and
separator, header-then-style, in the order the renderer resolves.
- check_doc_numbers.py derived five values it never checked, and those were
the ones that had drifted. The collected-test count (README said 1274, the
tree had 1369) and the A/B pass-rate and Fixed columns are now gated.
- benchmarks/README.md's v1.4.0 table was impossible on its face -- 21
passing plus 5 fixed is 26, not 24 -- and contradicted the report it
linked, because `ab-v1.4.0-vs-v1.5.0.json` was regenerated from a tree that
already carried the dimension fixes and so never measured the v1.5.0 tag.
Replaced with a real run: ab-v1.4.0-vs-v1.5.1.json, 21/26 -> 26/26.
Release gate
- release.yml ran one ubuntu/3.11 lane, so a Windows-only defect could reach
PyPI with no Windows job having executed. That is not hypothetical: v1.5.0
shipped `except pywintypes.com_error` raising NameError wherever pywin32 is
absent. It now runs the same three lanes as ci.yml, Windows included.
1368 passed, 1 xfailed. ruff clean. Tool inventory and all 16 gated document
numbers match the tree.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
**COM discarded areas it had already read.** `entity_measure` fell back to
rebuilding geometry from `.Coordinates` when `.Area` *or* `.Length` was
missing, coupling two independent property reads. HATCH, REGION and 3DSOLID
expose `.Area` and neither of the others, so the fallback fired, found no
vertices, and raised "AutoCAD reported neither an area nor usable vertices" --
while holding the area. Those are the exact types the README sells the COM
backend on. Now only a missing `.Area` triggers the fallback; an absent
perimeter is reported as `None` with `perimeter_exact: False` instead of being
invented, which also removes a `round(None, 6)` TypeError waiting for the first
type that answers `.Area` and nothing else.
**A plain square hatch reported itself self-intersecting.** `ezdxf.path
.flattening()` repeats the start point, and `is_self_intersecting` excluded
adjacent edges *by index*, so with the duplicate present the first and last
real edges were cross-tested and registered as crossing. Measured: a 40x40
SOLID hatch came back `area: 1600.0, self_intersecting: True`. A closed loop
now answers the same whether or not it carries its closing vertex, and a real
bowtie is still caught (`area: 0.0, self_intersecting: True`).
**The bowtie warning never fired on the live backend.** `self_intersecting` was
only computed inside the COM fallback, so an LWPOLYLINE bowtie -- which has
both `.Area` and `.Length` and never reaches it -- returned `area: 0.0,
self_intersecting: null`. The confident zero this field exists to flag, going
out unflagged. It is now computed on the normal path too.
Also corrects a docstring written earlier today in `contracts/analysis.py`
claiming the live backend "asks AutoCAD for `.Area`, which has already applied
the [hatch island] style". Whether ActiveX's hatch area applies the style is
not verified against a live seat, and the method could not measure a hatch at
all. It now says so.
The ActiveX member profiles behind the COM tests are assumptions, not facts,
and the tests say so; a live seat settles them. `.Circumference` for CIRCLE and
`.Perimeter` for REGION are deliberately NOT added here -- writing more members
from the reference is what produced four wrong beliefs in v1.4/v1.5.
1267 passed, 1 xfailed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three defects found after 1.5.0 reached PyPI, two of them by the adversarial
pass over the rewritten README.
The HTTP bind guard failed open on the launch path it was written for.
`_guarded_run_async` read the bind address from the `host` kwarg and treated an
absent one as loopback. It is not: `fastmcp run` forwards that kwarg only when
`--host` was passed, and fastmcp otherwise resolves the host from
`fastmcp.settings.host`, which is environment-backed. So
FASTMCP_HOST=0.0.0.0 fastmcp run server.py:mcp --transport http
bound every interface -- 149 tools including file open/save and AutoCAD command
execution, no token -- while the guard inspected the literal "127.0.0.1" and
waved it through. v1.4.0's changelog claimed this guard "fires on every launch
path"; it fired, and looked at the wrong host. It now resolves the effective
host, and warns rather than staying silent if it cannot.
`[com]` and `[full]` could not be installed off Windows. Both listed
`pywin32>=306` with no environment marker, and pywin32 publishes Windows wheels
and no sdist, so `pip install autocad-mcp-pro[full]` died at resolution on
Linux and macOS -- and `[full]` is the extra the README recommended to
contributors. CI never caught it because every Linux lane installs `[pdf]` or
syncs from uv.lock, whose resolution markers hide the gap. Both entries carry
`; sys_platform == "win32"` now, with a release-consistency test to keep them.
`drawing_settings({"dimscale": ...})` reported success and changed nothing
headlessly. It writes `$DIMSCALE`, which is what AutoCAD reads when it draws a
dimension, so the call worked on COM; ezdxf renders from the dimstyle table
entry and never consults the header. One call, one reported success, two
different drawings. The header value now folds into the per-dimension override
on all five dimension tools -- including `dimension_aligned` and
`dimension_angular`, which do not share the tolerance-override path and the
obvious fix would have missed. DIMSCALE 1.0 writes nothing.
README: every engine-conditional family in the feature table now says which
engine (boundary tracing, WIPEOUT/REVCLOUD/MTEXT masks, CHSPACE, typed hatch
edge paths, headless undo), and the checkout install line stopped recommending
an extra that could not resolve on the reader's platform.
1257 passed, 1 xfailed. 1.5.0 is to be yanked: its diameter and radius callouts
put wrong numbers on drawings at default settings.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`add_diameter_dim` / `add_radius_dim` measure to the point they are handed;
`leader_length` is a text placement. The ezdxf backend passed
`centre + (radius + leader)` as that point, so the leader became part of the
measurement: a true 40 mm bore was dimensioned 60 at the default
`leader_length=10`, and 108 at 34. Radius callouts were `leader_length` too
large the same way.
This is the worst class of defect for this project -- a wrong number, at
default settings, on the one part of a drawing that exists to carry numbers --
and it shipped in v1.4.0 and earlier. The size now comes from `radius` and
`location` only places the text.
The live COM backend was never affected: ActiveX's AddDimDiametric takes the
two chord points and the leader length as separate arguments. The two engines
had been disagreeing by 2 x leader_length on the same call.
Found while building the drawing for the new README, whose own bore callout was
wrong. Two checks added to correctness_suite.py; both report fail -> pass
against v1.4.0, not miss -> pass, which is what separates a repaired defect
from new capability in that lane. A/B is now 21/26 -> 26/26, five fixed, zero
regressed.
README rewritten from scratch
- Hero is a real ISO A3 sheet the server drew: m6 z24 involute spur gear, DIN
6885 keyed bore, section A-A, ISO 129 dimensions, ISO 286 H7 fit, ISO 7200
title block, 56 entities, drawing_critique clean. New
scripts/render_readme_showcase.py rebuilds it, and the tool-call sequence
that produces it is printed in the page.
- Star history chart, badge row, capability matrix, five evidence lanes, and a
"what this release is bad at" section carrying the 28% throughput regression.
- Every image and repo link is now an absolute URL: README.md is the PyPI long
description, where relative paths 404.
Corrections this work forced, all measured
- The df=0 example was wrong. FILLET is already in entity_fillet's own text;
the commands that genuinely scored zero are WBLOCK, PEDIT, OVERKILL,
LAYTRANS and MATCHPROP.
- 40,305 tokens is the tools/list wire payload; ~25,143 is the part forwarded
to the model. The old wording said "of schema", which is neither.
- `--tokenizer anthropic` needs a package and credentials this repo does not
lock, and refuses rather than falling back. Said so.
- Discovery ranks over the 149-tool advertised catalog, not the 154 registered.
- Five middlewares, not four; the fifth is what makes refusals machine-readable.
- Five of the 27 capability keys are environment-dependent, so the matrix
carries footnotes instead of bare ticks.
- "Every coordinate is WCS" has one deliberate exception: TEXT rotation.
- render_live_chart's axis still said "fixed 10-task matrix" while our bar came
from v3's fifteen. Each bar now carries its own matrix.
- .env.example said MAX_UNDO_STACK=50 (code: 5) and omitted four real
variables, two of them the remote-HTTP controls.
- server.json described an empty ALLOWED_PATHS as blocking access. It disables
the allowlist.
- server.py called the lean profile ~46 tools; it is 47.
- backends/capability.py cited a test file that does not exist.
1249 passed, 1 xfailed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Python evaluates an `except` clause on the way out of every failed call,
not only the ones it is meant to catch. `pywintypes` is bound only when
`sys.platform == "win32"` and the import succeeded, so on any host
without pywin32 -- all of Linux, and Windows installed without the
`[com]` extra -- an ordinary exception leaving `ComBackend._run` hit that
clause and became `NameError: name 'pywintypes' is not defined`, burying
the real error.
Every Linux CI leg failed on exactly this, in
test_ordinary_errors_are_unchanged. The timeout tests survived only
because they matched an earlier `except`; nothing else in the suite sends
a non-timeout exception through `_run`.
Fixed with a module-level `_COM_ERROR` tuple: `(pywintypes.com_error,)`
where the import worked, `()` where it did not. An empty tuple catches
nothing, which is correct when no com_error type exists to be raised -- a
placeholder Exception subclass would be worse than the bug, silently
swallowing unrelated errors.
Reproduced on Windows before fixing by deleting the module attribute,
which resolves the name the same way the absent import does; that is now
a test, alongside one pinning `_COM_ERROR` as a tuple. Verified through
the locked environment CI uses: 1244 passed, 1 xfailed.
README test-count snapshot 1243 -> 1245.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tool count 131 -> 154; 474 -> 1242 collected tests.
The release exists for two measured reasons. A 149-tool catalog costs a client
~40,300 tokens before it has asked for anything, and a drafter searching the way
drafters think -- FILLET, BPOLY, QSELECT, WBLOCK -- scored df=0 against the stock
index, because those words were simply not in the data.
Discovery and batching
- DISCOVERY_MODE=search replaces the catalog with search_tools + call_tool,
ranked over an AutoCAD command and synonym corpus (discovery/aliases.py) on
top of fastmcp's BM25 index. Measured: 40,305 -> 356 tokens advertised.
- cad_batch runs a step list in one round trip; fields= projects result-heavy
responses. The `core` profile is gone -- discovery replaced it.
Honesty debt (Tier 0)
- OCS/ECS: `extrusion` appeared nowhere in this codebase, so mirrored and
rotated geometry reported coordinates that were quietly wrong. backends/ocs.py
translates at the backend boundary; every tool coordinate is WCS on both
engines, and a tilted plane refuses rather than answering with a number that
looks fine.
- drawing_save_as(fmt="dwg") wrote DXF bytes to a .dwg path. drawing_audit never
repaired. analysis_measure_area shoelaced points the caller typed in.
- ezdxf calls gained a per-call timeout, so one hung call can no longer wedge a
server whose document lock is a single asyncio.Lock.
Architecture
- The 1854-line backend ABC is 19 contract modules; @capability(key, reason=)
makes optional methods declarative and a gate fails on undeclared holes.
- 8 layout/viewport tools, CHSPACE, CAD_PROGID escape hatch.
- Wave A: selection filters, boundary tracing, hatch depth, annotation objects,
measurement -- 13 tools of a planned 39. The REGION and 2D-boolean family was
cut on evidence: add_region() yields zero ACIS bytes and the greiner_hormann
substitute loses 28.2% of the area on a square with one semicircular edge.
Verified against a live AutoCAD 2026, which found four COM defects no amount of
reading would have caught -- AcadPViewport has no ViewCenter, and the line that
set it had been swallowed by a bare except since v1.4.
Benchmark v3 (15 tasks) and what it caught
- v2 scored this server 10/10, which carried no information: every task in it
exercised something the server was built around. Five tasks were added because
they can fail, and three did while being written -- a hatch could not be
measured though the refusal listed HATCH as measurable, the boundary tools and
the measure tool disagreed about the same shape (139.2177 vs 139.2699), and a
circle stored as two bulged vertices measured 0.0.
- Competitor reports are NOT re-scored. They are pinned v1.4 runs against v2 and
were never asked these five questions; the chart shows those rows `not run`.
- Correctness A/B: 21/24 -> 24/24, zero regressions.
Performance, stated plainly
The published v1.4 perf report was recorded on CPython 3.14 and the new one on
3.11.15, so the apparent 2-6x speedup is the interpreter, not this release.
Re-measured on one interpreter, v1.5.0 is 28% slower creating entities and 22%
slower on the 10k roundtrip. Fully attributed: EZDXF_CALL_TIMEOUT=0 restores
v1.4.0's exact numbers. That is the deadlock fix being paid for, the knob is
documented, and winning it back is on the 1.6 roadmap.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- TOOL_PROFILE=lean|core|full applied in the lifespan via server-level enable/disable; system_about reports the active profile; opt-in solid_* tools are hidden while ENABLE_3D=false
- layouts: layout_list/create/set_current + viewport_create (scaled model viewports) on both backends; drawing_export_pdf(layout=...); ezdxf uses TILEMODE + active-layout binding, COM switches ActiveLayout and restores it
- ISO 286: engineering/fits.py authored IT4-11 + fundamental-deviation tables (1-500 mm; shafts d..p/h/js, holes D..H/JS) with clear out-of-scope errors; dimension_linear/radius/diameter gained fit= resolved from the measured nominal
- tolerances: DIMTM now signed in deviation/limit modes so double-positive fits (p6 +0.035/+0.022) render correctly; legacy positive-magnitude contract preserved
- solids: solid_box/cylinder/extrude/revolve/boolean native on COM (AddBox/AddCylinder/AddRegion+AddExtrudedSolid/AddRevolvedSolid/Boolean); ezdxf reports the honest solid_3d capability boundary
- capability maps: paper_space native, new viewport_render feature, ENABLE_3D-gated solid_3d
- 60 new tests (profiles, layouts, viewports, layout PDF, fits, gating); version pins in tests now read version.__version__
Co-authored-by: Cursor <cursoragent@cursor.com>
ruff format was never run repo-wide; CI now enforces 'ruff format --check', so normalize every module once. No behavior changes.
Co-authored-by: Cursor <cursoragent@cursor.com>
dimension_linear always failed with '<unknown>.AddDimLinear' on the COM
backend — pywin32's dynamic dispatch error for a method that does not
exist: the AutoCAD ActiveX API has no AddDimLinear. AddDimRotated takes
the same arguments (XLine1Point, XLine2Point, DimLineLocation,
RotationAngle), so the call site only changes the method name.
Adds a mocked regression test asserting AddDimRotated is called with
the exact point/rotation arguments and AddDimLinear never is.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adds production-grade engineering features and tools: 2D GD&T (feature control frames + datum features) via engineering/gdt.py, ISO‑129 dimension tolerance support (engineering/tolerances.py) and an ezdxf/COM plumbing for toleranced dims, a scalar drawing score + invalidity ratio (engineering/scoring.py) wired into drawing_finalize, in-place entity editors (entity_edit_text/entity_edit_geometry), and a friendly drawing_settings facade. Includes server tool wiring, COM/ezdxf backend implementations, datum-consistency critique, many unit tests, README/CLAUDE/CHANGELOG updates, and a version bump to 1.2.0. Also corrects COM backend capability label (entities_2d).
New COM-only Entity Query tool that reads AutoCAD's implied ("pickfirst")
selection set and returns the selected entity handles + EntityInfo, so the AI
can scope work (e.g. dimension_auto) to exactly what the user picked in the
viewport instead of the whole drawing. Resolves#1 — the layer-juggling
workaround is no longer needed.
- backends/base.py: abstract selection_get() returning a status dict
- backends/com_backend.py: reads ActiveDocument.PickfirstSelectionSet, surfaces
the PICKFIRST sysvar, handles the empty-selection case
- backends/ezdxf_backend.py: headless stub (ok=False, empty handles, same shape)
- server.py: @mcp.tool registration (readOnlyHint), SECTION 5 3 -> 4 tools
- README + CHANGELOG + pyproject: 110 -> 111 tools, v1.1.0 -> v1.1.1
Verified live on AutoCAD 2027 (COM): selection_get correctly returned the
user's grip selection across two distinct picks; 318 tests pass, ruff-clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Audit-driven fixes across the dual backend, the premium workflow, and the
engineering layer. 318 tests, ruff-clean.
Quality gate (the moat):
- drawing_finalize now runs the premium ISO-128 critique in addition to the
8-step validator; leftover construction, non-ISO lineweights, untrimmed
corners, duplicates and dim overlap block the gate (strict_critique fails on
warnings too).
- dim_overlap critique no longer a no-op (dim reference point + bbox fallback);
dim/construction layers resolve from the active layer set (iso13567 too).
Stability / correctness:
- view_screenshot & drawing_export_pdf render headless via Agg (no more
worker-thread SIGSEGV).
- gear tooth profile no longer self-overlaps at high tooth counts; section view
no longer duplicates bore lines; validator keyway heuristic fixed.
- ezdxf aligned/angular dim API, full-circle polar array duplicate already
covered by Sprint 1; this bundle adds save-format-from-extension,
entity_offset side selection, ARC length, properties parity (bounding_box /
rotation / char_height), mtext rotation.
COM robustness (mocked-COM tested):
- CoUninitialize on teardown; transaction commit/rollback try/finally + UNDO via
the CMDACTIVE guard; system_run_lisp guard + USERS1 value capture;
set_variable type coercion; HWND via Application.HWND; BlockInfo.description.
Security:
- HTTP remote-bind guard fires on every launch path (incl. `fastmcp run`);
StaticTokenVerifier wired into FastMCP; AutoLISP allowlist bypass-vector tests.
Hygiene: linetype-on-demand in _apply_attrs, honest view_zoom returns, snap-on-arc
sweep handling, point_tangent acos clamp, dynamic tool_groups / tool count,
word-boundary SPUR/HELICAL, undo-stack locking.
Deferred: R22 (undo/transaction stack isolation) lands with the I1 refiner (1.2),
which depends on it.
New concrete base methods (backend-agnostic, use entity_get + pure math):
- AutoCADBackend.point_intersection: LINE-LINE, LINE-CIRCLE, CIRCLE-CIRCLE
with ref_x/ref_y disambiguation for multiple candidates.
- AutoCADBackend.point_tangent: external-point-to-circle tangent touch-point
with ref_x/ref_y for side selection; correct perpendicularity formula
(T-F)⊥(T-C) via cos(θ-α)=-r/d.
Registered as MCP tools: point_intersection, point_tangent.
13 new tests in tests/test_meta_tools_geometry.py.
226 tests total.
Three production-blocking defects + two legal/infra gaps from the recon pass.
R1 (CRITICAL): the 8 premium meta-tools (drawing_plan, drawing_critique,
point_from_snap, construction_xline, construction_clear, drawing_apply_iso_layers,
dimension_auto, entity_select_smart) raised NotImplementedError on the COM
backend — i.e. the entire "non-negotiable" premium workflow crashed on the
DEFAULT Windows backend. Lifted all eight to AutoCADBackend as concrete,
backend-agnostic implementations built on the shared abstract primitives +
the identical EntityInfo.properties contract, so both backends inherit them.
The only backend-specific piece left is the new `_create_xline` primitive
(XLINE has no cross-backend entity_create_* equivalent). Removes ~285 lines of
ezdxf-only duplication; the existing meta-tool test suite now covers shared code.
R2 (CRITICAL): layer_create/layer_modify/entity_set_properties used
int(lineweight), truncating every millimetre lineweight (0.50, 0.25, 0.18, 0.13)
to 0 — silently wiping the whole ISO 128 discipline, because engineering/layers.py
passes mm-floats while the MCP boundary passes hundredths-ints. Added
normalize_lineweight() to reconcile both conventions to ezdxf/COM hundredths and
wired it into all six call sites.
R3 (HIGH): _check_iso128 was a permanent no-op (everything was 0 from R2, so the
`lw <= 0: continue` guard skipped all layers). Fixed by R2; additionally exclude
CONSTRUCTION-class layers (intentionally sub-ISO 0.05mm scratch weight) to avoid
a new false positive, and corrected the misleading "normalises to mm" comment.
Also: add MIT LICENSE (referenced by CLAUDE.md but missing — legal gap) and
restore .github/workflows/ci.yml (lint kept non-blocking until the repo-wide
ruff cleanup; the test job is the real gate).
Verified: 182 passed / 2 xfailed; functional check confirms lineweights now
store as hundredths (GEOMETRY=50) and the ISO critique correctly flags a 0.40mm
layer while passing a clean ISO drawing.
Introduce the autocad-mcp-premium skill with workflow docs, examples, and references (.claude/skills/autocad-mcp-premium/*). Add PlanSpec/critique plumbing and engineering helpers (engineering/plan_spec.py, engineering/critique.py) plus tests and a smoke script. Extend backend API (backends/base.py) with corner operations and premium meta-tools (trim/extend/fillet/chamfer, drawing_plan, drawing_critique, point_from_snap, construction_xline/clear, drawing_apply_iso_layers, dimension_auto, entity_select_smart) and implement COM backend corner ops (backends/com_backend.py) with placeholders for meta-tools. Update CLAUDE.md to document the premium drawing rules and standard workflow. Misc: add examples, references, and tests for premium features, and minor server/backend adjustments.
Introduces an engineering/ package that lets MCP clients produce production-
quality technical drawings without LLM-improvised geometry. Adds 7 new MCP
tools, an 8-step pre-completion validator, and an automatic linetype + layer
bootstrap on drawing_new so CENTER/HIDDEN/PHANTOM and standard mechanical
layers (GEOMETRY, DIM, HATCH, TEXT, TITLEBLOCK, ...) are always available.
- engineering/gear.py: pure-Python involute math, 40+ points/flank, helical
+ spur front views, deterministic section A-A (no helix lines in section).
- engineering/keyway.py: DIN 6885 keyway table + parametric keyed bore /
side-section drawers.
- engineering/titleblock.py: ISO 7200 A3 (420x297 mm) title block; title
text is written verbatim to the title cell.
- engineering/validator.py: DrawingValidator with 8 checks (real DIMENSION
entities, no hidden orphans, linetypes loaded, bore + keyway in both
views when expected, title consistency e.g. forbid 'HELICAL SPUR GEAR'
when helix_angle truthy, saved-to-disk + file-on-disk, screenshot
exported, dwg path returned).
- backends/ezdxf_backend.py: AutoCAD-only linetype fallback (HIDDEN,
BORDER families) so ezdxf doc gets correct patterns when linetype_load
is called for names ezdxf.tools.standards does not ship.
- backends/base.py: concrete helpers set_layer_active / ensure_linetypes.
- server.py: Section 12 with 7 engineering tools, drawing_new(bootstrap=
True), and an ENGINEERING WORKFLOW block in the MCP instructions string.
- 30 new tests covering gear math, DIN6885 lookup, ISO A3 layout, title
verbatim, and every validator check. Tool count 89 -> 96.
