Nozzle stubs started at the bounding-box edge, so on a dished head, a
hopper's sloped wall or a cone roof they floated off the vessel (default
horizontal_vessel N3/N4 by 0.8 mm, reactor N3/N4 by 0.06 mm, unbounded for
user fractions). The port now stays STUB outside the bbox and the stub is
drawn from there in to where its axis-aligned line meets the outline, via a
new geometry.scan_hits helper; jacketed reactors' stubs pass through the
jacket to the wall.
validate_vessel_params refuses height <= width for vertical capsules
(vertical_vessel, column, reactor), width <= height for horizontal_vessel
and height <= width/6 for a cone-roof tank: those folded the heads through
each other and produced geometry outside the declared bbox. Unknown keys
inside a nozzle dict are refused naming nozzles[i] and the key, like the
top-level parameters already were.
Tests: a fuzz over every accepted vessel shape x 28 nozzle positions checks
the declared bbox and that each stub's inner end lies on the outline (exact
point-to-arc/segment distance); the default-symbol repros and the refusals
are pinned. 137 of the new cases fail against the previous module.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Task 9 of the v1.6 P&ID plan: engineering/pid/symbols_equipment.py fills
the stub with three ISO 10628-2 families registered on import — rotating
(centrifugal_pump, pd_pump, compressor, fan, agitator, ejector), heat
(shell_tube_hx, plate_hx, air_cooler, fired_heater) and misc inline
fittings (filter, strainer_y, reducer with shape=concentric|eccentric,
flange_pair, spectacle_blind, orifice_plate with a signal port,
drain_vent). Every port sits on the declared bbox edge and every symbol
carries the TAG/DESC attribute pair; the catalogue harness now covers
103 specs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two authoring slips in the valve x actuator composition:
- The diaphragm actuator's stem stopped at y=4 while the dome's flat base
sat at y=6, so the canonical control-valve symbol (PID_VALVE_*_DIAPHRAGM,
9 catalogue entries) shipped with its dome floating 2 mm above the stem.
- Actuators were placed at a fixed y=4 regardless of the body, so on the
needle body (top 5.6) the piston/motor/solenoid glyphs were drawn over
the knob and the hand bar across the needle's stem; the stem line(0,0,0,4)
also duplicated the needle's own axial line (and the butterfly disc).
Placement is now body-relative: `_body` reports `axis_top` (where its own
geometry on x=0 ends) and the stem runs from there to the glyph base at
`body_top + STEM_CLEARANCE`; the diaphragm dome's base is the stem top
(base + DIAPHRAGM_YOKE), and the FAIL attribute follows the glyph base.
The reference 8x4 bodies keep their published numbers (globe+diaphragm
signal at y=9.0, bbox top 9.0).
Tests: per-combination check that the stem starts at the body's derived
axis top, the glyph's lowest edge equals the stem top, the glyph clears
the body, and the signal port is the topmost edge; plus a catalogue-wide
no-duplicate-primitives gate. 33 combinations fail on the old geometry.
The plan's Step 3 snippet is synced with the fixed module.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
build_instrument drew a circle for every type, so `computer` shipped as
circle + hexagon and `plc` as circle + square + diamond (10 of the 20 bubble
blocks wrong, and the circle poked 0.67 mm outside the hexagon's flat top).
Spec 4.4: discrete = circle; dcs = circle inside a square; computer =
hexagon; plc = diamond inside a square. The outline is now chosen per type.
Location lines were always drawn from -r to +r, overshooting the hexagon's
slanted sides by 0.46 mm at y=+/-0.8 and the circle's chord by 0.06 mm.
They now end on the outline (`_bubble_half_width`): chord for the circle,
full width for the square, `r - |y| / tan 60` for the hexagon.
Tests now assert the exact primitive list per type and that every location
line stays on/inside its outline (both fail against the previous code).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Three ways `engineering/pid/lines.py` could emit a silent wrong result or
an opaque crash instead of an honest refusal:
- `format_line_number` only recognised a token that was exactly `{field}`;
`P-{seq:04d}`, `{size}"-{service}` or `{bogus}x` were copied verbatim,
braces and all, into the line number. Tokens are now parsed with
`string.Formatter`: one named known field per token, a format spec is
honoured (`{seq:04d}` -> `0007`), literal decoration around the field
survives with it and drops out with it, and conversions, positional
fields, multi-field tokens, unbalanced braces and specs the value cannot
take are all refused by token name.
- `route` never checked finiteness: a NaN `end` collapsed the U candidate
to a valid two-point "straight" path ending at the stub point. Every
coordinate of start/end/waypoints and the stub are now checked and the
refusal names the offending `end.x` / `waypoints[1].y` / stub.
- A non-axis port direction (45.0, 90.5, nan) raised `KeyError` from the
AXIS lookup. `axis_direction()` now normalises with a 1e-6 deg tolerance
for engine drift and otherwise raises ValueError naming `start_dir` /
`end_dir` and how to resolve it (rotate to a multiple of 90 or pass
waypoints).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
