457c53644f950902e280b8108239ca3b667314bd
4
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Umut CANandClaude Opus 5
|
457c53644f |
fix(task-3): keyway end-view arc, the machined face, and the chamfer's segment bound
Three defects in the feature catalogue, all faithfully transcribed from the plan text and all wrong in shipped code. 1. Keyway.prims(view="side") emitted the arc the keyway REMOVES. `Arc` is CCW start -> end, and the emitted (right wall -> left wall) is the ~31 degree cap over the slot opening, not the ~329 degrees of shaft that survives it. Measured live on AutoCAD 2026 (Documents.Add scratch doc, closed in a finally): ModelSpace.AddArc(center, radius, start_rad, end_rad) -- angles in RADIANS, CCW start -> end -- gives ArcLength 8.098 mm for the emitted 74.534 -> 105.466 deg and 86.150 mm for the reversed 105.466 -> 74.534 deg, against a 94.248 mm full circle at r = 15; StartPoint/EndPoint of the emitted arc are exactly the notch walls at x = +/-4. Swapped, so the arc now runs left wall -> right wall the long way round, and the side view's bbox goes from (-4, 11, 4, 15) to (-15, -15, 15, 14.457). 2. Hole and Pocket cut the plate from OPPOSITE faces in the same view frame: Hole ran z = 0 -> depth, Pocket z = thickness -> thickness - depth, and neither takes a face parameter. A plate carrying both showed the pocket milled from one side and the blind hole drilled from the other, silently -- omission() returns None for both, so nothing reported it. The frame comment now names the machined face (v = thickness, the face the front view looks at), and Hole drills from it: the blind floor, the counterbore step and the through bore all hang down from there, as Pocket already did. 3. Chamfer.validate bounded the axial leg against the whole part, never against the segment the chamfer sits on. A shallow lead-in passed validation and was drawn straight through a shoulder at a radius that segment does not have (size 30 at 10 deg on a 15 mm end segment: radial 5.29 < 10 so the radial guard was happy, yet `before` landed at x = 45, two segments away). New helper _anchor_segment names the segment a corner actually cuts into -- at a step, the adjacent one carrying the larger radius -- and the leg is bounded by its length, refused by name with the step it would have crossed. Tests: the keyway test asserted only primitive counts and two x coordinates, so it passed with the arc reversed; it now pins the sweep, the endpoints and the bbox. The hole test exercised only a through hole, which is symmetric; added a blind-hole-and-pocket test that pins both to the same face, and a counterbore test. Added three chamfer tests (two refusals, one that must still be accepted). Each fix was mutation-checked: reverting it fails its test. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
ac6c4075ba |
feat(task-3): the feature catalogue and its standards tables
engineering/mech/features.py is the nineteen typed features of spec section 5,
each answering the same four questions - is my placement legal, what do I
contribute to this view, to a cut face, and what dimension do I want - plus the
five structural hooks the view engine needs: removal_box, radial_edit,
corner_edit, outline_edit and omission. Pure arithmetic; a test asserts emitted
primitive tuples, not a screenshot.
Nothing restates a table the repository already owns: Keyway takes its width
and depth from engineering.keyway (DIN 6885-1) and is refused by name outside
that table's bore range; GearTeeth takes its outline from engineering.gear's
involute generator and is refused when its tip diameter disagrees with the
segment it sits on.
standards/threads.py transcribes ISO 261 Table 1 and Table 2 - first-choice
M1.6-M64 plus second-choice M14/M18/M22/M27/M33/M39/M45/M52/M60 - and computes
ISO 724's basic minor and pitch diameters from ISO 68-1's own formula, pinned
against the published values (M20x2.5 -> 17.294 / 18.376). The remaining
second-choice diameters, every third-choice diameter and fine pitches below M8
are not transcribed and are refused by name, never interpolated. The drawing
rules are ISO 6410: minor at 0.8 x major, a thread-length limit line across the
major, a three-quarter circle in the end view, and an internal thread whose
section hatch runs to the major diameter.
standards/{undercuts,rings,centres,orings}.py ship DIN 509, DIN 471/472,
DIN 332-1 and ISO 3601-2 with their SOURCE, their row-key contract and an
**empty** row set. That is deliberate and is the track's table rule taken at its
word: a row that could not be verified against the standard is not shipped,
because a wrong relief depth or groove diameter is a wrong workshop drawing
while a narrow table is merely narrow. Every lookup is refused by name and says
what to transcribe and where; the features accept explicit dimensions so the
geometry is fully exercised, and DIN 332 form R is refused outright rather than
approximated by the straight 60 degree cone of forms A and B. Filling any of
these tables later is a data edit with no code change, and a shape test already
fails any row that lands without a column the drawing code reads.
Three deviations from the plan text, each measured rather than assumed
(the merge agent should keep exactly one copy of the first):
1. standards/__init__.py (Task 1, on main) refused a registration with no rows
("registered no rows"), which would have made the four not-transcribed
tables impossible to register at all - and registering them is what keeps a
later transcription a data edit. register() now refuses a rows argument that
is not a dict and accepts an empty one; two tests in tests/test_mech_standards.py
pin both halves. No existing test asserted the old refusal.
2. ORingGroove's housing kind is carried by `housing`, not `kind`. A dataclass
field named `kind` overwrites the discriminator _Base.to_dict() writes:
measured, Probe(id='og').to_dict() == {'kind': 'radial', 'id': 'og'}, so
feature_from_dict would then refuse its own payload as an unknown feature
kind and no part carrying an O-ring groove could round-trip through XDATA.
A new test pins the round trip.
3. The plan's end-chamfer test asserted after == (75.0, 10.0) - the corner
itself - and before == (72.0, 8.268), a point on neither surface. The real
edit is before (72.0, 10.0) on the cylinder and after (75.0, 8.268) on the
end face, consistent with the 45-degree start chamfer the same file pins.
The test was corrected to the measured geometry; the behaviour is unchanged.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
|
||
|
Umut CANandClaude Opus 5
|
04d269318a |
feat(task-2): the mechanical part model - RevolvedPart, PrismaticPart, build_part
engineering/mech/part.py is the model the whole track draws from: a revolved stack of segments along +X, or a closed prismatic outline plus a thickness, each carrying a list of typed features. Pure arithmetic - no backend, no async, no DXF - which is what lets the view engine be tested without a drawing. Every refusal fires before anything is drawn and names the offending path the way pid_from_spec does: a non-finite or non-positive number as segments[2].d_outer, a bore that is not smaller than its outside (a bore that changes diameter is two segments), an outline with fewer than three distinct vertices, an outline that crosses itself (engineering.measure.is_self_intersecting - the shoelace cancels crossed lobes rather than failing, so a bowtie would otherwise measure 0.0), an unknown material, an unknown segment key, a duplicate feature id. Two gates are the reason this is a model rather than a dict: a feature whose placement is off the part is refused by its own name and by the range it missed, and two features that would remove the same material are refused with both names and the overlapping box. Neither is clamped. part_to_dict round-trips through build_part, which is what lets mech_part_draw write the model onto the drawing as ACADMCP_MECH XDATA and mech_view_add read it back months later without the caller re-describing the part. Two fixes to the plan's own code and test list, both recorded in deviations: _features_from imported engineering.mech.features unconditionally, so a featureless part - every fixture in this module, and both round-trips - died on ModuleNotFoundError until Task 3 lands; the import now happens only when there is a feature dict to build. And the plan's test file omitted test_a_duplicate_feature_id_is_refused while its own gate deselects it by name, so the duplicate-id refusal the commit message claims went unpinned; the test is written here and Task 3 turns it green. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |
||
|
Umut CANandClaude Opus 5
|
2bb8044144 |
feat(mech): shared foundation - primitives, XDATA codec, standards registry, ISO 128-50 materials
engineering/mech/ opens with the four modules every track-B/G branch imports, so the four worktrees can be cut from this commit and none of them has to invent a name the others will conflict with. - primitives.py: the typed descriptions the pure modules emit (Line, Arc, Circle, Poly, HatchArea, Text, DimIntent) with bbox / translate / rotate / scale, and ROLE_LAYER - the one place an ISO 128 line role becomes a layer name, so no module hardcodes a layer. The arc bbox sweeps its quadrants: a 0-180 arc reports y=+r, not its endpoints, which is what keeps the view layout from stacking two views on top of each other. - xdata.py: the ACADMCP_MECH codec in Track A's shape - a 1001 application marker, 1000 chunks of at most 255 ASCII characters, the 16 KB per-entity ceiling enforced before anything is written, and a foreign application, a corrupt chunk stream, a wrong version or an unknown kind refused with ValueError instead of decoded into something plausible. - standards/__init__.py: the table registry. A size outside the coverage is refused against the coverage; a size inside it that is not a listed row is refused against the rows. Nothing is interpolated, an ambiguous variant is never resolved by taking the first row, and a registration whose SOURCE does not name the table it was transcribed from is refused. - standards/materials.py: the section-hatch map for nine materials. ISO 128-50 standardises only the general hatching (narrow continuous lines at 45 degrees) - that is acadiso.pat ANSI31 and what engineering/gear.py already draws for steel. The distinguishing symbols are ASME Y14.2M's section lining as shipped in AutoCAD 2026's acadiso.pat, read off the installed file; cast iron's departure from ASME and the absence of any mechanical symbol for concrete and wood are stated in the rows themselves. Angles are 0.0 because the patterns already carry 45 degrees, and the two architectural patterns' scales are derived from the ANSI31 line spacing and recomputed by the test rather than chosen. No tool is registered here. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd |