Three ways `engineering/pid/lines.py` could emit a silent wrong result or
an opaque crash instead of an honest refusal:
- `format_line_number` only recognised a token that was exactly `{field}`;
`P-{seq:04d}`, `{size}"-{service}` or `{bogus}x` were copied verbatim,
braces and all, into the line number. Tokens are now parsed with
`string.Formatter`: one named known field per token, a format spec is
honoured (`{seq:04d}` -> `0007`), literal decoration around the field
survives with it and drops out with it, and conversions, positional
fields, multi-field tokens, unbalanced braces and specs the value cannot
take are all refused by token name.
- `route` never checked finiteness: a NaN `end` collapsed the U candidate
to a valid two-point "straight" path ending at the stub point. Every
coordinate of start/end/waypoints and the stub are now checked and the
refusal names the offending `end.x` / `waypoints[1].y` / stub.
- A non-axis port direction (45.0, 90.5, nan) raised `KeyError` from the
AXIS lookup. `axis_direction()` now normalises with a 1e-6 deg tolerance
for engine drift and otherwise raises ValueError naming `start_dir` /
`end_dir` and how to resolve it (rotate to a multiple of 90 or pass
waypoints).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Every one of these was reported ok/clean to the caller while being wrong.
Silently wrong numbers
- selection_filter(min_area) read `entity.dxf.get("area", 0.0)` for SOLID,
TRACE and HATCH, none of which carry that attribute, so every hatch
measured 0.0. A 1600 mm^2 hatch was excluded by min_area=1.0 while
`filtered_by` asserted the filter had run, and COM (which reads ActiveX
.Area) returned a different selection for the same call. It now answers
from the measurement `entity_measure` uses, so the two cannot disagree.
- Every headless dimension rendered through ezdxf's bare `Standard` style:
1.0 mm text with a comma decimal marker, against ISO 3098's 2.5 mm minimum
and ISO 129's point -- while the document header itself said $DIMTXT 2.5.
`ezdxf.new(setup=True)` is not the fix; measured, it renders a 100 mm
dimension as "10000". The attributes are now stored explicitly.
- Saving writes `dimrnd = 0.0` onto the Standard style, and ezdxf applies
`xround(value, dimrnd)` whenever the attribute is present at all --
`xround(33.333, 0.0)` is 33. So on any reopened file, including one this
server saved, every dimension was rounded to a whole unit before DIMDEC
formatted it: a 12.75 mm feature dimensioned 13. AutoCAD means DIMRND 0 as
*no* rounding; the sentinel is now discarded at every load site, and a real
0.5 mm rounding is left alone.
- The DIM* header fold gave out-of-range values teeth they did not have when
they died in the header: dim_decimals=-1 returned ok and then killed the
next dimension with `ValueError: Format specifier missing precision` from
inside ezdxf, and 40 printed forty digits of float noise onto the sheet.
Ranges are now AutoCAD's own (DIMDEC 0-8, DIMZIN 0-15, lengths positive).
Security
- security.py recorded the policy as "sanitize_command and sanitize_lisp each
have exactly ONE caller ... the policy is scoped to the CHANNEL". The
premise was false. `_ensure_linetype_loaded` and `ComBackend.linetype_load`
build `_-LINETYPE _LOAD {name} {file}` and hand it to SendCommand, which
treats a newline and ';' as segment separators -- so a `linetype=` argument
carrying either injected further AutoCAD commands, and the 36-verb denylist
never saw that channel. Guarded with the DXF symbol-name rule (the
injection characters fall out of it rather than being enumerated) plus
validate_path for the file argument, which was also the one path-taking
tool reaching the filesystem unchecked. The policy comment is corrected.
Gates that could not see
- drawing_critique returned zero issues on a quarantined document: all seven
checks wrapped their backend call in a bare `except Exception`. CLAUDE.md
rule 7 makes that call the gate an agent is told to trust. Only the
quarantine now escapes; an ordinary broken check still degrades.
`_check_dimension_legibility` also read `_doc` directly from the event loop
thread, missing the gate and performing exactly the unsynchronised access
the quarantine exists to prevent. `construction_clear` answered
"deleted: 0" -- there was nothing to clear -- for the same reason.
- The iso128 focus checked layer lineweights only, so a sheet lettered at
1.0 mm critiqued clean. It now reads the effective dimension height and
separator, header-then-style, in the order the renderer resolves.
- check_doc_numbers.py derived five values it never checked, and those were
the ones that had drifted. The collected-test count (README said 1274, the
tree had 1369) and the A/B pass-rate and Fixed columns are now gated.
- benchmarks/README.md's v1.4.0 table was impossible on its face -- 21
passing plus 5 fixed is 26, not 24 -- and contradicted the report it
linked, because `ab-v1.4.0-vs-v1.5.0.json` was regenerated from a tree that
already carried the dimension fixes and so never measured the v1.5.0 tag.
Replaced with a real run: ab-v1.4.0-vs-v1.5.1.json, 21/26 -> 26/26.
Release gate
- release.yml ran one ubuntu/3.11 lane, so a Windows-only defect could reach
PyPI with no Windows job having executed. That is not hypothetical: v1.5.0
shipped `except pywintypes.com_error` raising NameError wherever pywin32 is
absent. It now runs the same three lanes as ci.yml, Windows included.
1368 passed, 1 xfailed. ruff clean. Tool inventory and all 16 gated document
numbers match the tree.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
**COM discarded areas it had already read.** `entity_measure` fell back to
rebuilding geometry from `.Coordinates` when `.Area` *or* `.Length` was
missing, coupling two independent property reads. HATCH, REGION and 3DSOLID
expose `.Area` and neither of the others, so the fallback fired, found no
vertices, and raised "AutoCAD reported neither an area nor usable vertices" --
while holding the area. Those are the exact types the README sells the COM
backend on. Now only a missing `.Area` triggers the fallback; an absent
perimeter is reported as `None` with `perimeter_exact: False` instead of being
invented, which also removes a `round(None, 6)` TypeError waiting for the first
type that answers `.Area` and nothing else.
**A plain square hatch reported itself self-intersecting.** `ezdxf.path
.flattening()` repeats the start point, and `is_self_intersecting` excluded
adjacent edges *by index*, so with the duplicate present the first and last
real edges were cross-tested and registered as crossing. Measured: a 40x40
SOLID hatch came back `area: 1600.0, self_intersecting: True`. A closed loop
now answers the same whether or not it carries its closing vertex, and a real
bowtie is still caught (`area: 0.0, self_intersecting: True`).
**The bowtie warning never fired on the live backend.** `self_intersecting` was
only computed inside the COM fallback, so an LWPOLYLINE bowtie -- which has
both `.Area` and `.Length` and never reaches it -- returned `area: 0.0,
self_intersecting: null`. The confident zero this field exists to flag, going
out unflagged. It is now computed on the normal path too.
Also corrects a docstring written earlier today in `contracts/analysis.py`
claiming the live backend "asks AutoCAD for `.Area`, which has already applied
the [hatch island] style". Whether ActiveX's hatch area applies the style is
not verified against a live seat, and the method could not measure a hatch at
all. It now says so.
The ActiveX member profiles behind the COM tests are assumptions, not facts,
and the tests say so; a live seat settles them. `.Circumference` for CIRCLE and
`.Perimeter` for REGION are deliberately NOT added here -- writing more members
from the reference is what produced four wrong beliefs in v1.4/v1.5.
1267 passed, 1 xfailed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tool count 131 -> 154; 474 -> 1242 collected tests.
The release exists for two measured reasons. A 149-tool catalog costs a client
~40,300 tokens before it has asked for anything, and a drafter searching the way
drafters think -- FILLET, BPOLY, QSELECT, WBLOCK -- scored df=0 against the stock
index, because those words were simply not in the data.
Discovery and batching
- DISCOVERY_MODE=search replaces the catalog with search_tools + call_tool,
ranked over an AutoCAD command and synonym corpus (discovery/aliases.py) on
top of fastmcp's BM25 index. Measured: 40,305 -> 356 tokens advertised.
- cad_batch runs a step list in one round trip; fields= projects result-heavy
responses. The `core` profile is gone -- discovery replaced it.
Honesty debt (Tier 0)
- OCS/ECS: `extrusion` appeared nowhere in this codebase, so mirrored and
rotated geometry reported coordinates that were quietly wrong. backends/ocs.py
translates at the backend boundary; every tool coordinate is WCS on both
engines, and a tilted plane refuses rather than answering with a number that
looks fine.
- drawing_save_as(fmt="dwg") wrote DXF bytes to a .dwg path. drawing_audit never
repaired. analysis_measure_area shoelaced points the caller typed in.
- ezdxf calls gained a per-call timeout, so one hung call can no longer wedge a
server whose document lock is a single asyncio.Lock.
Architecture
- The 1854-line backend ABC is 19 contract modules; @capability(key, reason=)
makes optional methods declarative and a gate fails on undeclared holes.
- 8 layout/viewport tools, CHSPACE, CAD_PROGID escape hatch.
- Wave A: selection filters, boundary tracing, hatch depth, annotation objects,
measurement -- 13 tools of a planned 39. The REGION and 2D-boolean family was
cut on evidence: add_region() yields zero ACIS bytes and the greiner_hormann
substitute loses 28.2% of the area on a square with one semicircular edge.
Verified against a live AutoCAD 2026, which found four COM defects no amount of
reading would have caught -- AcadPViewport has no ViewCenter, and the line that
set it had been swallowed by a bare except since v1.4.
Benchmark v3 (15 tasks) and what it caught
- v2 scored this server 10/10, which carried no information: every task in it
exercised something the server was built around. Five tasks were added because
they can fail, and three did while being written -- a hatch could not be
measured though the refusal listed HATCH as measurable, the boundary tools and
the measure tool disagreed about the same shape (139.2177 vs 139.2699), and a
circle stored as two bulged vertices measured 0.0.
- Competitor reports are NOT re-scored. They are pinned v1.4 runs against v2 and
were never asked these five questions; the chart shows those rows `not run`.
- Correctness A/B: 21/24 -> 24/24, zero regressions.
Performance, stated plainly
The published v1.4 perf report was recorded on CPython 3.14 and the new one on
3.11.15, so the apparent 2-6x speedup is the interpreter, not this release.
Re-measured on one interpreter, v1.5.0 is 28% slower creating entities and 22%
slower on the 10k roundtrip. Fully attributed: EZDXF_CALL_TIMEOUT=0 restores
v1.4.0's exact numbers. That is the deadlock fix being paid for, the knob is
documented, and winning it back is on the 1.6 roadmap.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- TOOL_PROFILE=lean|core|full applied in the lifespan via server-level enable/disable; system_about reports the active profile; opt-in solid_* tools are hidden while ENABLE_3D=false
- layouts: layout_list/create/set_current + viewport_create (scaled model viewports) on both backends; drawing_export_pdf(layout=...); ezdxf uses TILEMODE + active-layout binding, COM switches ActiveLayout and restores it
- ISO 286: engineering/fits.py authored IT4-11 + fundamental-deviation tables (1-500 mm; shafts d..p/h/js, holes D..H/JS) with clear out-of-scope errors; dimension_linear/radius/diameter gained fit= resolved from the measured nominal
- tolerances: DIMTM now signed in deviation/limit modes so double-positive fits (p6 +0.035/+0.022) render correctly; legacy positive-magnitude contract preserved
- solids: solid_box/cylinder/extrude/revolve/boolean native on COM (AddBox/AddCylinder/AddRegion+AddExtrudedSolid/AddRevolvedSolid/Boolean); ezdxf reports the honest solid_3d capability boundary
- capability maps: paper_space native, new viewport_render feature, ENABLE_3D-gated solid_3d
- 60 new tests (profiles, layouts, viewports, layout PDF, fits, gating); version pins in tests now read version.__version__
Co-authored-by: Cursor <cursoragent@cursor.com>
ruff format was never run repo-wide; CI now enforces 'ruff format --check', so normalize every module once. No behavior changes.
Co-authored-by: Cursor <cursoragent@cursor.com>
Adds production-grade engineering features and tools: 2D GD&T (feature control frames + datum features) via engineering/gdt.py, ISO‑129 dimension tolerance support (engineering/tolerances.py) and an ezdxf/COM plumbing for toleranced dims, a scalar drawing score + invalidity ratio (engineering/scoring.py) wired into drawing_finalize, in-place entity editors (entity_edit_text/entity_edit_geometry), and a friendly drawing_settings facade. Includes server tool wiring, COM/ezdxf backend implementations, datum-consistency critique, many unit tests, README/CLAUDE/CHANGELOG updates, and a version bump to 1.2.0. Also corrects COM backend capability label (entities_2d).
Audit-driven fixes across the dual backend, the premium workflow, and the
engineering layer. 318 tests, ruff-clean.
Quality gate (the moat):
- drawing_finalize now runs the premium ISO-128 critique in addition to the
8-step validator; leftover construction, non-ISO lineweights, untrimmed
corners, duplicates and dim overlap block the gate (strict_critique fails on
warnings too).
- dim_overlap critique no longer a no-op (dim reference point + bbox fallback);
dim/construction layers resolve from the active layer set (iso13567 too).
Stability / correctness:
- view_screenshot & drawing_export_pdf render headless via Agg (no more
worker-thread SIGSEGV).
- gear tooth profile no longer self-overlaps at high tooth counts; section view
no longer duplicates bore lines; validator keyway heuristic fixed.
- ezdxf aligned/angular dim API, full-circle polar array duplicate already
covered by Sprint 1; this bundle adds save-format-from-extension,
entity_offset side selection, ARC length, properties parity (bounding_box /
rotation / char_height), mtext rotation.
COM robustness (mocked-COM tested):
- CoUninitialize on teardown; transaction commit/rollback try/finally + UNDO via
the CMDACTIVE guard; system_run_lisp guard + USERS1 value capture;
set_variable type coercion; HWND via Application.HWND; BlockInfo.description.
Security:
- HTTP remote-bind guard fires on every launch path (incl. `fastmcp run`);
StaticTokenVerifier wired into FastMCP; AutoLISP allowlist bypass-vector tests.
Hygiene: linetype-on-demand in _apply_attrs, honest view_zoom returns, snap-on-arc
sweep handling, point_tangent acos clamp, dynamic tool_groups / tool count,
word-boundary SPUR/HELICAL, undo-stack locking.
Deferred: R22 (undo/transaction stack isolation) lands with the I1 refiner (1.2),
which depends on it.
Three production-blocking defects + two legal/infra gaps from the recon pass.
R1 (CRITICAL): the 8 premium meta-tools (drawing_plan, drawing_critique,
point_from_snap, construction_xline, construction_clear, drawing_apply_iso_layers,
dimension_auto, entity_select_smart) raised NotImplementedError on the COM
backend — i.e. the entire "non-negotiable" premium workflow crashed on the
DEFAULT Windows backend. Lifted all eight to AutoCADBackend as concrete,
backend-agnostic implementations built on the shared abstract primitives +
the identical EntityInfo.properties contract, so both backends inherit them.
The only backend-specific piece left is the new `_create_xline` primitive
(XLINE has no cross-backend entity_create_* equivalent). Removes ~285 lines of
ezdxf-only duplication; the existing meta-tool test suite now covers shared code.
R2 (CRITICAL): layer_create/layer_modify/entity_set_properties used
int(lineweight), truncating every millimetre lineweight (0.50, 0.25, 0.18, 0.13)
to 0 — silently wiping the whole ISO 128 discipline, because engineering/layers.py
passes mm-floats while the MCP boundary passes hundredths-ints. Added
normalize_lineweight() to reconcile both conventions to ezdxf/COM hundredths and
wired it into all six call sites.
R3 (HIGH): _check_iso128 was a permanent no-op (everything was 0 from R2, so the
`lw <= 0: continue` guard skipped all layers). Fixed by R2; additionally exclude
CONSTRUCTION-class layers (intentionally sub-ISO 0.05mm scratch weight) to avoid
a new false positive, and corrected the misleading "normalises to mm" comment.
Also: add MIT LICENSE (referenced by CLAUDE.md but missing — legal gap) and
restore .github/workflows/ci.yml (lint kept non-blocking until the repo-wide
ruff cleanup; the test job is the real gate).
Verified: 182 passed / 2 xfailed; functional check confirms lineweights now
store as hundredths (GEOMETRY=50) and the ISO critique correctly flags a 0.40mm
layer while passing a clean ISO drawing.
Introduce the autocad-mcp-premium skill with workflow docs, examples, and references (.claude/skills/autocad-mcp-premium/*). Add PlanSpec/critique plumbing and engineering helpers (engineering/plan_spec.py, engineering/critique.py) plus tests and a smoke script. Extend backend API (backends/base.py) with corner operations and premium meta-tools (trim/extend/fillet/chamfer, drawing_plan, drawing_critique, point_from_snap, construction_xline/clear, drawing_apply_iso_layers, dimension_auto, entity_select_smart) and implement COM backend corner ops (backends/com_backend.py) with placeholders for meta-tools. Update CLAUDE.md to document the premium drawing rules and standard workflow. Misc: add examples, references, and tests for premium features, and minor server/backend adjustments.
Introduces an engineering/ package that lets MCP clients produce production-
quality technical drawings without LLM-improvised geometry. Adds 7 new MCP
tools, an 8-step pre-completion validator, and an automatic linetype + layer
bootstrap on drawing_new so CENTER/HIDDEN/PHANTOM and standard mechanical
layers (GEOMETRY, DIM, HATCH, TEXT, TITLEBLOCK, ...) are always available.
- engineering/gear.py: pure-Python involute math, 40+ points/flank, helical
+ spur front views, deterministic section A-A (no helix lines in section).
- engineering/keyway.py: DIN 6885 keyway table + parametric keyed bore /
side-section drawers.
- engineering/titleblock.py: ISO 7200 A3 (420x297 mm) title block; title
text is written verbatim to the title cell.
- engineering/validator.py: DrawingValidator with 8 checks (real DIMENSION
entities, no hidden orphans, linetypes loaded, bore + keyway in both
views when expected, title consistency e.g. forbid 'HELICAL SPUR GEAR'
when helix_angle truthy, saved-to-disk + file-on-disk, screenshot
exported, dwg path returned).
- backends/ezdxf_backend.py: AutoCAD-only linetype fallback (HIDDEN,
BORDER families) so ezdxf doc gets correct patterns when linetype_load
is called for names ezdxf.tools.standards does not ship.
- backends/base.py: concrete helpers set_layer_active / ensure_linetypes.
- server.py: Section 12 with 7 engineering tools, drawing_new(bootstrap=
True), and an ENGINEERING WORKFLOW block in the MCP instructions string.
- 30 new tests covering gear math, DIN6885 lookup, ISO A3 layout, title
verbatim, and every validator check. Tool count 89 -> 96.
