Two review findings on pid_line_draw, both root-caused:
1. existing_pid_lines() filtered entity_list(type_filter="LWPOLYLINE") and
tested info.type == "LWPOLYLINE". A live LWPOLYLINE's ActiveX ObjectName
is AcDbPolyline (the repo's own 2026-08-06 measurement), which the COM
engine reports as POLYLINE, so on live AutoCAD every auto-built number was
seq 1, crossings always 0 and port_reuse always []. The reader now lists
without a type filter and accepts {LWPOLYLINE, POLYLINE, 2DPOLYLINE} plus
LINE — the same set the Task 14 graph reader keeps. The COM _entity_info
polyline branch matched only the DXF-flavoured "AcDbLWPolyline", so a live
LWPOLYLINE never got `points` either; it now accepts both spellings (with
the OCS normalisation), which is what makes the crossing count real there.
2. resolve_endpoint() applied only x_scale, so a mirrored INSERT
(entity_mirror writes y_scale = -1) resolved its port to a point off the
symbol and the line was drawn through the pump body. transform_port takes
an optional y_scale (default: uniform, signature unchanged) and applies the
full reflect-then-rotate transform to point, direction and radius; a
stretched symbol (|x_scale| != |y_scale|) has no circle for a radial port
and is refused with a clear ValueError instead of a silent wrong number.
Tests: mirror about both axes resolves onto the real geometry, a stretched
copy is refused, and a fake-COM AcDbPolyline probe sees the existing line
with its seq, vertices and from-ref.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Nozzle stubs started at the bounding-box edge, so on a dished head, a
hopper's sloped wall or a cone roof they floated off the vessel (default
horizontal_vessel N3/N4 by 0.8 mm, reactor N3/N4 by 0.06 mm, unbounded for
user fractions). The port now stays STUB outside the bbox and the stub is
drawn from there in to where its axis-aligned line meets the outline, via a
new geometry.scan_hits helper; jacketed reactors' stubs pass through the
jacket to the wall.
validate_vessel_params refuses height <= width for vertical capsules
(vertical_vessel, column, reactor), width <= height for horizontal_vessel
and height <= width/6 for a cone-roof tank: those folded the heads through
each other and produced geometry outside the declared bbox. Unknown keys
inside a nozzle dict are refused naming nozzles[i] and the key, like the
top-level parameters already were.
Tests: a fuzz over every accepted vessel shape x 28 nozzle positions checks
the declared bbox and that each stub's inner end lies on the outline (exact
point-to-arc/segment distance); the default-symbol repros and the refusals
are pinned. 137 of the new cases fail against the previous module.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Task 9 of the v1.6 P&ID plan: engineering/pid/symbols_equipment.py fills
the stub with three ISO 10628-2 families registered on import — rotating
(centrifugal_pump, pd_pump, compressor, fan, agitator, ejector), heat
(shell_tube_hx, plate_hx, air_cooler, fired_heater) and misc inline
fittings (filter, strainer_y, reducer with shape=concentric|eccentric,
flange_pair, spectacle_blind, orifice_plate with a signal port,
drain_vent). Every port sits on the declared bbox edge and every symbol
carries the TAG/DESC attribute pair; the catalogue harness now covers
103 specs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two authoring slips in the valve x actuator composition:
- The diaphragm actuator's stem stopped at y=4 while the dome's flat base
sat at y=6, so the canonical control-valve symbol (PID_VALVE_*_DIAPHRAGM,
9 catalogue entries) shipped with its dome floating 2 mm above the stem.
- Actuators were placed at a fixed y=4 regardless of the body, so on the
needle body (top 5.6) the piston/motor/solenoid glyphs were drawn over
the knob and the hand bar across the needle's stem; the stem line(0,0,0,4)
also duplicated the needle's own axial line (and the butterfly disc).
Placement is now body-relative: `_body` reports `axis_top` (where its own
geometry on x=0 ends) and the stem runs from there to the glyph base at
`body_top + STEM_CLEARANCE`; the diaphragm dome's base is the stem top
(base + DIAPHRAGM_YOKE), and the FAIL attribute follows the glyph base.
The reference 8x4 bodies keep their published numbers (globe+diaphragm
signal at y=9.0, bbox top 9.0).
Tests: per-combination check that the stem starts at the body's derived
axis top, the glyph's lowest edge equals the stem top, the glyph clears
the body, and the signal port is the topmost edge; plus a catalogue-wide
no-duplicate-primitives gate. 33 combinations fail on the old geometry.
The plan's Step 3 snippet is synced with the fixed module.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
build_instrument drew a circle for every type, so `computer` shipped as
circle + hexagon and `plc` as circle + square + diamond (10 of the 20 bubble
blocks wrong, and the circle poked 0.67 mm outside the hexagon's flat top).
Spec 4.4: discrete = circle; dcs = circle inside a square; computer =
hexagon; plc = diamond inside a square. The outline is now chosen per type.
Location lines were always drawn from -r to +r, overshooting the hexagon's
slanted sides by 0.46 mm at y=+/-0.8 and the circle's chord by 0.06 mm.
They now end on the outline (`_bubble_half_width`): chord for the circle,
full width for the square, `r - |y| / tan 60` for the hexagon.
Tests now assert the exact primitive list per type and that every location
line stays on/inside its outline (both fail against the previous code).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
