4fe2d96 matched custom keys with str.casefold(), but AutoCAD's key compare
is a simple one-to-one case compare, not Unicode full case folding.
Measured on AutoCAD 2026 (AddCustomInfo of the second spelling over the
first on a scratch document, Close(False)): Project/PROJECT, Grün/GRÜN,
é/É, ÿ/Ÿ, ł/Ł, σ/Σ, я/Я and dž/DŽ are one key ('Duplicate key'), while
Straße/STRASSE, ẞ/ß, kelvin/Kelvin-sign, µ/Μ, σς/ΣΣ and Dž/DŽ are two keys
(both stored) -- every one of those six is casefold()-equal. So with
'Straße' present, `custom={'BEFORE': 'b', 'STRASSE': 's2', 'AFTER': ...}`
was routed to SetCustomByKey, AutoCAD answered 'Key not found', and the
request raised with subject and BEFORE applied and AFTER never written --
the half-write class the fix claimed to close; a delete of 'STRASSE' over
'Straße' raised the same way; headlessly 'STRASSE' overwrote the 'Straße'
value instead of becoming a second tag; and the validator refused
{'Straße', 'STRASSE'} with a reason AutoCAD contradicts.
COM no longer routes from a Python approximation. An exact spelling goes
to SetCustomByKey; anything else is AddCustomInfo, and its 'Duplicate key'
(excepinfo scode -2145386475, measured) falls back to SetCustomByKey. A
delete is RemoveCustomByKey, and its 'Key not found' (scode -2145386476)
is reported as not deleted. Any other com_error keeps propagating. The
scode is matched before the English description because the HRESULT text
is localised.
The headless engine and the validator match on `custom_key_fold`: a
per-character fold to lowercase only when lower()/upper() are single
characters that round-trip and the character is one of the two; it never
changes string length and reproduces every measured pair (ß, ς, µ, the
Kelvin sign, Dž, ı and İ stay as they are). Docstrings in settings.py and
server.py now state that rule instead of 'case-insensitive'.
Tests: parametrized fold over the measured SAME / DISTINCT table (plus a
pin that casefold() merges the six DISTINCT pairs, which is why 4fe2d96
regressed), validator acceptance of each DISTINCT pair, headless
side-by-side storage and deletion of each pair, the fake SummaryInfo now
matches by the same fold and raises pywintypes.com_error with the
measured excepinfo tuples, the COM half-write scenario for each pair
(no SetCustomByKey guess, 'Key not found' delete tolerated, rest of the
request lands), the 'Duplicate key' fallback, and an unrelated
SummaryInfo failure still raising. The scodes were measured live before
the change; AutoCAD stopped answering COM (blocked in another agent's
command or a modal dialog) before the post-change re-run, so that run
is recorded as not done.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
The 2b9791f fix mirrored only the characters the first review happened to
measure ('=' and ';'), so `custom={'AAA': 'first', 'A:B': 'x', 'ZZZ': 'never'}`
still raised from AddCustomInfo('A:B') on the live engine after subject and
AAA were applied -- the same half-write for 11 other keys. Re-measured on
AutoCAD 2026 by sweeping every character 0x20-0x7E through a scratch
document: exactly thirteen printable characters are 'Invalid key' anywhere
in a key (" * , / : ; < = > ? \ ` |); control characters, internal spaces,
a no-break space and unicode are accepted; leading/trailing whitespace
(space, tab, NBSP) is refused. `_CUSTOM_KEY_FORBIDDEN` is now that set,
the internal-NBSP refusal (wrong: measured accepted) is gone, and the
validator / tool docstrings state the measured rule instead of a closed
enumeration that was false.
A delete (`{key: None}`) is exempt from the AddCustomInfo syntax rules:
RemoveCustomByKey never validates syntax (measured: 'Key not found', never
'Invalid key'), and 2b9791f ran the check before the None branch, so a key
an ezdxf script wrote ('A=B', ' PAD ') showed in drawing_properties_get and
could never be removed. The line-break rule still applies both ways.
Also measured: custom keys are case-insensitive in AutoCAD (AddCustomInfo
over an existing case-variant is 'Duplicate key'; SetCustomByKey and
RemoveCustomByKey match either spelling and keep the stored one). The COM
routing was case-sensitive, so `{'PROJECT': ...}` over 'Project' went to
AddCustomInfo and failed mid-write -- the same class. Both engines now
match existing keys casefolded (update in place under the stored spelling,
never a second tag), and a request naming two case-variants is refused.
Tests: parametrized validator sweep over all thirteen characters, the
accepted set (control chars, NBSP, unicode, the other printables), the
delete exemption headlessly on a DXF carrying such keys and on the fake
SummaryInfo, case-variant refusal, and case-insensitive routing against a
fake that raises 'Duplicate key' / 'Key not found' like AutoCAD. Confirmed
live through the real ComBackend on a scratch document (Close(False)).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Three header-only-write / half-write classes in drawing_properties_set:
1. Measured: ezdxf emits $CUSTOMPROPERTYTAG / $CUSTOMPROPERTY only after
$LASTSAVEDBY, which does not exist before R2004, so on an R12 (AC1009) or
R2000 (AC1015) document the write reported ok, drawing_properties_get
echoed it from memory, and drawing_save_as (version kept) wrote nothing --
the class f3ff703 removed for CANNOSCALE. The headless engine now refuses
with a ValueError naming the DXF version and "save as R2004 or newer",
before custom_vars is touched; the dwgprops capability reason no longer
claims custom_properties_supported unconditionally.
2. A line break in a custom key or value passed validation, ezdxf wrote it
unescaped, and the saved DXF failed to reopen (DXFStructureError) -- the
whole drawing lost, reported as success. Refused by name in the shared
validator.
3. Measured on AutoCAD 2026: AddCustomInfo rejects keys with leading/trailing
whitespace and keys containing '=', ';' or a no-break space as 'Invalid
key' -- mid-write, after the summary and earlier keys were applied, as an
unnamed COM error -- while the headless engine wrote them. The shared
validator now mirrors those rules, so both engines refuse before writing
(internal spaces, tabs, unicode and 300-char keys stay accepted, as
AutoCAD accepts them).
Pinned by save+reopen tests on R12/R2000 (refused, file reads back empty),
R2004 (round-trips), the newline case (refused, the file still opens), and
the fake-SummaryInfo COM test (no ActiveX call reaches SummaryInfo).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Summary fields are refused headlessly with capability dwgprops before any
write; custom properties are $CUSTOMPROPERTYTAG/$CUSTOMPROPERTY pairs and
survive save + reopen. Validation is shared, by name, and never str()-coerces.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two review findings, both root causes.
1. `_sync_header_to_dimstyle` copied the DIMSTYLE entry's ezdxf-internal
arrowhead spelling (OBLIQUE) into the DXF-facing $DIMBLK/$DIMBLK1/$DIMBLK2
header, so the saved file named a block it did not hold (the blocks are
_OBLIQUE / _DOT) and `system_get_variable("DIMBLK")` answered "OBLIQUE"
headlessly against "_OBLIQUE" on COM and in the same engine's own
`dimstyle_list` row. The header write now goes through
`reported_arrowhead` — the same read-side rule `_dimstyle_value` applies.
Pinned by header, `system_get_variable`, save/reopen (`ezdxf.readfile`
header equals the block the file holds) and the Restore-to-Standard
empty-string case in `test_builtin_arrowheads_render_save_and_report_one_spelling`.
2. The `mleaderstyle` capability refusal rested on a false engine boundary.
acax25enu.tlb (AutoCAD 2026) exposes IAcadMLeaderStyle with Name,
ArrowSize, LandingGap, TextHeight, TextStyle, ... — exactly what
`Dictionaries.Item("ACAD_MLEADERSTYLE").Item(i)` returns — and
IAcadDictionary.AddObject(keyword, "AcDbMLeaderStyle") creates one.
COM `mleaderstyle_list` now reads the four values off those objects
(`values_available: True`); COM `mleaderstyle_create` validates every value
(`validate_mleaderstyle`, shared with ezdxf), checks the clash and the text
style before AddObject, then writes the four properties. The contract
method is `@abstractmethod` again, the key is gone from both capability
maps, the fake ActiveX surface models the real call shape, and the spec
(§4.2, §8.1, §9) states the ActiveX route.
Live AutoCAD was not running on this machine (GetActiveObject: operation
unavailable; no acad.exe), so the COM route is type-library-verified and
fake-tested, not executed live — scripts/smoke_settings_com.py (Task 24)
owns that.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
ezdxf keeps a multi-line ATTRIB's two placement surfaces (the ATTRIB's own
insert/align_point and the embedded MTEXT's insert) in step through
transform() but not translate(): Insert.translate moves only the ATTRIB's
points (1.4.4 attrib.py has no translate). entity_move / entity_copy /
entity_array_rectangular therefore left the embedded MTEXT behind, so
block_explode burst the note 50 units from its symbol (audit clean), and
block_set_attributes / text_find_replace -- which rebuild the MTEXT and let
set_mtext re-place the ATTRIB from it -- teleported the attribute back to
the old spot while the INSERT stayed put (a regression of e7dafb8/b753a12,
which before wrote only dxf.text).
- _anchored_mtext(attrib): the virtual MTEXT re-anchored to the ATTRIB's
own placement (get_placement() through its OCS, the inverse of ezdxf's
_update_location_from_mtext). _burst_attrib and _write_attrib_value read
through it, so a drawing whose surfaces already disagree bursts and
writes at the ATTRIB's placement instead of the stale MTEXT's.
- _translate(ent, ...): translate + settle every multi-line ATTRIB's MTEXT
onto the ATTRIB (the set_mtext round trip ezdxf's own transform uses),
keeping the whole value in group 1. Used by move, copy, rectangular array.
- _transform(ent, m): transform + restore group 1 of every multi-line
ATTRIB -- BaseAttrib.transform goes through set_mtext, which mirrors only
the first line, so rotate/scale/mirror/polar array/change_space turned
'A\PB' into 'A' on the one surface an R2010 save keeps.
- block_insert of a multi-line ATTDEF: add_auto_attribs embeds through
embed_mtext with the same first-line mirror; the whole value goes into
group 1 the way _write_attrib_value keeps it.
Tests: move/copy/rectangular array carry the MTEXT (explode lands on the
symbol), set_attributes and find_replace after a move leave the attribute
where the move put it, a rotated reference moves both surfaces by the same
delta, a stale drawing bursts/writes at the ATTRIB placement, rotate/scale/
mirror/polar and a fresh insert keep the whole value across an R2010
round trip, and a single-line reference is unchanged. 13 fail before the
fix, all pass after; full suite 2511 passed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
DXF and ActiveX layer tables are case-insensitive, but block_define collected
the primitives' layers with a case-sensitive set. A request naming 'Alpha' and
'ALPHA' with create_layers=True made ezdxf add the first, then raise
DXFTableEntryError on the second after the write — layer left behind, no block,
surfaced as an internal error instead of a named refusal. COM ran Layers.Add
twice, got the existing layer back the second time, and reported two layers
created for one that appeared; the two engines diverged and the refusal message
without create_layers named the same layer twice.
referenced_layers() in backends/block_specs.py keys the set on the folded name
and keeps the first spelling; both engines consume it. _FakeLayers in the
hardening tests now matches Item/Add case-insensitively and returns the existing
record on a duplicate Add, as the ActiveX table does, so the COM path is pinned.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
base_x/base_y were only float()-cast, so a NaN base point was written into
the BLOCK record; a primitive on a layer the drawing lacks was written as a
dangling reference doc.audit() never flags (and on COM would fail mid-loop
after Blocks.Add). validate_base_point names the key; the layer table is
probed before the first write and the missing names are refused, or created
and reported as layers_created when create_layers=true (new optional kwarg,
contract + both engines + tool).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
block_insert and block_set_attributes applied str() to whatever arrived, so
a JSON null became the text None and a non-mapping failed after the INSERT
was written. validate_attribute_values (backends/block_specs.py) runs first
on both engines: strings pass the one-line rule, ints and finite floats are
written as plain digits, everything else is a TypeError naming the tag.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Headless text_find_replace matched and wrote only dxf.text of an ATTRIB/ATTDEF, so on a multi-line attribute it reported replaced: 1 while block_get_attributes and block_explode still carried the old embedded MTEXT (and a needle on the second line was never found). The ATTRIB/ATTDEF branch now reads through _attrib_value and writes through _write_attrib_value, the same pair block_get_attributes / block_set_attributes use.
COM block_explode swallowed a failing GetAttributes() (attrs = ()), GetConstantAttributes() and Invisible, then exploded, deleted every ATTDEF placeholder and the reference and returned ok: True with no attribute text -- every value destroyed silently on a transient RPC_E_CALL_REJECTED. Those reads now happen before Explode() and propagate with nothing written; a failure after the explode deletes the members it added and the TEXTs written so far and leaves the reference in place (_undo_explode), so the drawing is never left half-burst under an exception. The fakes gain the members a live AcadBlockReference / AcadAttributeDefinition always expose (GetConstantAttributes, Constant, Invisible) instead of relying on the swallow.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two review findings on the multi-line-attribute paths of block_explode /
block_set_attributes.
COM: `_add_mtext_from_capture` wrote `InsertionPoint` before
`AttachmentPoint`. ActiveX's `AttachmentPoint` keeps the text body where it
is and relocates the anchor, so every non-TopLeft attribute was laid out
TopLeft-at-anchor with only the label moved (live: a BottomLeft two-line
note landed two lines low, BottomRight also a box width right). The anchor
is now written last, unconditionally, after the attachment and the frame.
Verified live on AutoCAD 2026: every alignment's bbox matches the control
and the end-to-end burst MTEXT sits at the ATTRIB's TextAlignmentPoint.
The fake MTEXT now relocates `InsertionPoint` on `AttachmentPoint`/`Normal`
writes the way ActiveX does, both tests assert where the anchor ended up,
and the alignment test uses BottomRight rather than the default TopLeft
that could never show the displacement.
ezdxf: `_write_attrib_value` relied on `set_mtext`, which mirrors only the
first line into `dxf.text`; below R2018 ezdxf exports no embedded MTEXT,
so the default R2010 document saved `NEW ONE` where the reader had
promised `NEW ONE\PNEW TWO\PNEW THREE`. `dxf.text` now carries the whole
value (AutoCAD's own `TextString` convention) after the MTEXT rebuild;
the R2010 round-trip test uses a `\P` value, and an R2018 round trip
pins both surfaces.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Three authored claims in SYSVAR_CATALOG were false against the engines:
- HPANG said "degrees" but ActiveX GetVariable/SetVariable (and AutoLISP
getvar) hold radians - measured on AutoCAD 2026 in a scratch document:
SetVariable(pi/4) reads back 0.7853981633974483 on both paths. The row
now says radians, like POLARANG.
- ANGBASE said "radians" with both engines True, but the DXF header stores
$ANGBASE in degrees (AutoCAD saved the 1.5708-radian seat value as 90.0)
and ezdxf read/wrote it raw, so the two engines disagreed by a factor of
57.3. EzdxfBackend now translates that header variable at its boundary
(_HEADER_DEGREE_SYSVARS): the tool speaks radians on both engines, the
file keeps degrees.
- OSMODE claimed engines.ezdxf True, but $OSMODE is an R12-only header
variable ezdxf never exports for R2000+: a headless write reported
ok: True and read back None after save + reopen. It is registry-saved
in AutoCAD, so it joins _UNSAVED_SYSVARS (refused with
capability: registry_sysvar; the facade's `osmode` key refuses and
snapshots None headlessly, like polar / polar_angle). Headless reads of
every registry-saved variable now report None instead of whatever the
ezdxf template holds in memory.
The gate that should have caught all three, tests/test_sysvar_catalog.py's
default round-trip, wrote 56 no-ops out of 66 and never saved: it now
writes a value that differs from the fresh document's for every writable
ezdxf-True entry, saves, reopens and reads back from the file. Two new
tests pin OSMODE's refusal and ANGBASE's radians-at-the-tool /
degrees-in-the-file split.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two review findings on the headless engine, both content lost with ok: True.
Multi-line attribute writer: `block_set_attributes` set only `attrib.dxf.text`,
so after an edit `block_get_attributes` reported the new value while
`block_explode` (`_burst_attrib`) burst the embedded MTEXT at its pre-edit
content -- and on the default R2010 document, where ezdxf exports no embedded
MTEXT, a save/reload carried the new value the exploded drawing never showed.
`_write_attrib_value` now rebuilds the embedded MTEXT from its own virtual
entity with the new content (`virtual_mtext_entity()` + `set_mtext(...,
graphic_properties=False)`, the round trip ezdxf's `BaseAttrib.transform`
uses), keeping placement, style and height; `_attrib_value` reports the
embedded MTEXT's full `Line1\PLine2` content for a multi-line attribute, as
AutoCAD's `TextString` does, so get / set / explode / COM agree.
Opaque members: `block_explode` iterated `virtual_entities()` without a
`skipped_entity_callback`, so ezdxf dropped every member it cannot copy
(OLE2FRAME) or transform (VIEWPORT) with a debug log, an ACAD_PROXY_ENTITY
without proxy graphics contributed nothing, and the reference was then deleted.
`_explodable_members` materializes the list before any write and refuses by
member with the typed capability `explode_opaque_members` (declared on both
engines: headless False with the reason, COM native), naming the block and
the live way out. The block_explode docstrings (backend and tool) now state
this refusal instead of claiming the xref/MINSERT gate covered everything.
Tests: eight new headless cases in tests/test_track_a_hardening.py -- the
multi-line reader, the rewrite (value on every surface, placement unchanged,
clean audit), a `\P` value and the empty value, an R2010 save/reload, the
single-line path unchanged, the opaque-member refusal (nothing written,
reference alive, members named), an ordinary block still exploding under a
uniform scale, and the capability declared on both engines.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
A multi-line ATTRIB keeps its content in an embedded MTEXT; dxf.text is only
the first line (ezdxf) or "Line1\PLine2" (AutoCAD), so the TEXT the explode
emitted silently dropped lines or rendered literal \P with a clean audit.
ezdxf: `_burst_attrib` adds `virtual_mtext_entity()` (graphic properties and
WCS placement already carried; the reference matrix applied for a constant
ATTDEF) and marks it invisible like the ATTRIB. COM: `_capture_attrib` reads
`MTextAttribute` / `MTextAttributeContent` / `MTextBoundaryWidth` and
`_add_mtext_from_capture` goes through `AddMText` (height, style, frame,
then Rotation, then the attachment mapped from the ATTRIB's Alignment).
Two INSERT kinds `virtual_entities()` cannot explode were destroyed with
ok: True: an xref (no virtual entities, reference deleted) and a MINSERT
(only the first cell resolved, the rest of the grid gone). Both are now
refused by name before any write, on both engines (`block_record.is_xref`
/ `mcount > 1` headless; `Blocks.Item(Name).IsXRef` / `AcDbMInsertBlock`
live, the latter previously failing the INSERT check with the misleading
"not a block reference").
Tests: nine new cases in tests/test_track_a_hardening.py (headless multi-line
ATTRIB and constant ATTDEF, xref and MINSERT refusals, a single-cell grid
that still explodes; COM multi-line capture, frame-before-angle, and both
named refusals). The fake ActiveX surface gains AddMText and IsXRef.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Measured: an R12 (AC1009) document has no OBJECTS section, so ezdxf exports
neither AcDbVariableDictionary/DICTIONARYVAR nor the seeded SCALE objects, and
drawing_save_as keeps AC1009. `_set_annotation_scale` reported `ok: True,
changed 1:1 -> 1:50` and the file reloaded as 1:1 -- the header-only write
that vanishes on reload, the class this task exists to remove, and a breach
of the backend's own R12 honesty convention (viewport_set_scale / lock).
The write is now refused with a ValueError naming R12 and "save as R2000 or
newer", after parse_scale (a malformed value is still named as such) and
before either dictionary is touched, so a refused call leaves the root
dictionary as it found it and drawing_settings still applies the sibling keys
(limits / grid / ortho survive R12). The refusal is listed with the others in
the contract and server docstrings. Pinned by two tests that save, reopen and
read the R12 file back.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Three headless defects in the styles block, each measured before the fix:
* `_normalise_dimstyle_rounding` cleaned `Standard` only, while ezdxf's
exporter writes DIMRND 0.0 for every DIMSTYLE. A user style (ISO-25 / ANSI)
came back from save/open, transaction_rollback and drawing_undo rounding
every dimension to a whole unit ("33" for 33.333, "R6" for R6.35) with
dimstyle_list still reporting DIMDEC 2. It now walks the whole table.
* `drawing_purge` followed only entity `.dxf.style`, so it deleted the text
style a DIMSTYLE (DIMTXSTY), an MLEADERSTYLE (text_style_handle) or the
header ($TEXTSTYLE / $DIMTXSTY) referenced; the next dimension silently
rendered in Standard and drawing_save_as raised DXFTableEntryError after
leaving a truncated file. `_style_table_references` now counts those, plus
the arrowhead blocks a DIMSTYLE / MLEADERSTYLE / MULTILEADER references,
compared case-insensitively.
* `_sync_header_to_dimstyle` wrote only the attributes the target style
stores, leaving the previous style's $DIM* in the header — folded onto the
next dimension by `_with_header_dimvars` (ISO-25 DIMZIN 0 / DIMSCALE 2.0
then Restore Standard rendered 5.0 mm "33.30") and written to the file as
current-style overrides; $DIMRND 0.5 outlived the style's own discard. It
now writes the schema default for every whitelist variable the style omits
(`Standard` for DIMTXSTY), which reproduces a fresh header exactly.
tests/test_styles.py: the reopen test now renders a dimension after the
reopen, plus one test per defect; all four fail on the previous backend.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
COM: ``text.Normal`` was a plain Python tuple, which ActiveX marshals as
VT_ARRAY|VT_VARIANT and refuses with E_INVALIDARG (verified live on
AutoCAD 2026); because the write came after Explode(), the ATTDEF deletes
and AddText, the tool raised and left the drawing torn. It now goes
through ``_apoint`` like every other point write, and the fake ActiveX
surface refuses a bare tuple on Normal/InsertionPoint/TextAlignmentPoint
so a test cannot pin the wrong call shape again.
COM: every AcDbAttributeDefinition Explode() returned was deleted, but
GetAttributes() excludes constant attributes, so a constant attribute's
only visible text was destroyed with ok: True. A constant ATTDEF from the
explode (Constant member, or its tag in GetConstantAttributes()) is now
captured like an ATTRIB and replaced by a TEXT; placeholders are still
just deleted.
ezdxf: an AutoCAD-authored reference carries no ATTRIB for a constant
attribute and virtual_entities() skips ATTDEF, so the same text vanished
headlessly. A constant ATTDEF whose tag has no attached ATTRIB becomes a
TEXT transformed by the reference matrix, the path add_auto_attribs takes,
and is not converted twice when block_insert did attach one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
An ezdxf-authored drawing has no ACAD_SCALELIST entries, and
`_ensure_scale_entry` appended only the requested scale. AutoCAD repopulates
its default list only when the dictionary is *empty*, so the saved file
opened with a one-entry scale list and `SetVariable("CANNOSCALE", "1:1")`
failed with `Error setting system variable` -- the annotation scale could
no longer be changed in AutoCAD, while the tool reported `ok: True` and the
test pinned the degraded state (`len(keys) == 1`).
An empty list is now seeded with AutoCAD's own default metric list before
the requested scale is considered: the 17 entries a fresh AutoCAD 2026
drawing carries (`Documents.Add()` saved as DXF, MEASUREMENT 1), in that
order and under AutoCAD's own keys A0 ... A9, B0 ... B6. New entries take
the next key in that sequence (`_scale_list_key`) instead of being keyed by
their name; presence is still decided by group 300, so a non-empty
AutoCAD-authored list is never re-seeded or duplicated. Verified live: the
headless file now opens in AutoCAD 2026 with the 17 keys, CANNOSCALE 1:50
current, and switching to 1:1 and 1:100 works.
Tests: the fresh-drawing test asserts the seeded names and keys, that
setting 1:50 appends nothing (it is a default), that 1:25 lands under B7
once, and that the list survives save + reopen with 1:1 present; a new test
pins that *reading* the annotation scale creates nothing (the read side
stays pure, AutoCAD fills an empty list itself); the AutoCAD-keyed list test
now expects the A3 key. The `drawing_settings` docstring says what each
engine does and that AutoCAD refuses the live write on a paper-space layout
with no active viewport (measured).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two silent wrong-place defects in the BURST path. An ATTRIB is an OCS
entity, so the TEXT that replaces it now carries extrusion/thickness with
insert/align_point; a mirrored reference (ATTRIB reflected to (0,0,-1),
INSERT +Z with yscale=-1) put the tag 50 units across the mirror axis with
a clean audit. Members and TEXTs now go into the INSERT's owner layout
(ezdxf get_layout, COM ObjectIdToObject(OwnerID)) instead of the current
space: a sheet title block exploded while Model was current duplicated
geometry into model space and then died on delete_entity headless, and on
COM landed the tag text in model space with ok: True. A reference nested
in a block definition is refused before any write on both engines.
Five regression tests (mirrored INSERT, sheet-owned INSERT with Model
current, nested INSERT, and the COM owner-block / nested-refusal call
shapes) fail on the previous commit and pass here.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
`_ensure_scale_entry` decided "already present" with `scales.get(name)`, a
lookup by DICTIONARY key. AutoCAD saves ACAD_SCALELIST keyed A0, A1, ... with
the scale name only in the SCALE object's AcDbScale group 300, so on any
AutoCAD-authored drawing (whose default metric list already carries 1:1 ...
1:100, 2:1) the check never matched and every `annotation_scale` write
appended a second SCALE object with the same name.
Presence is now decided by iterating the list and reading each entry's
group-300 name (`_scale_entry_name`, which reads the DXFTagStorage subclass
ezdxf loads SCALE into). A genuinely new entry is still keyed by its name
(the plan's test contract); if that key is somehow taken it falls back to
the next free `A<n>` slot like AutoCAD.
Regression test seeds an A0/A1/A2-keyed list the way AutoCAD writes it and
asserts: an existing 1:50 is reused (no new key, exactly one object named
1:50), a missing 1:25 is appended exactly once and is idempotent, and the
file round-trips with a clean audit.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
virtual_entities() yields geometry only, so an exploded tagged symbol lost
its tag value silently. Every attached ATTRIB now becomes a TEXT at the
same WCS placement/height/rotation/style/layer (invisible stays
invisible), reported as attribute_texts. COM reads GetAttributes before
Explode, deletes the ATTDEF placeholders Explode returns, AddText per
value, and deletes the reference ActiveX Explode leaves behind.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Headlessly, grid/snap are stored on the active VPORT, CANNOSCALE in
AcDbVariableDictionary (+ an ACAD_SCALELIST entry), and LIMMIN/LIMMAX on
the model-space layout as well as the header — measured: the header alone
is overwritten at save. Registry-saved variables (AUTOSNAP, POLARANG, …)
are refused with capability registry_sysvar instead of vanishing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Track A's task-1 gate covered block_insert only; the sibling tool still
returned a handle for a typo'd name that doc.audit() later deleted, and
both tools accepted *Model_Space (a reference cycle). One gate per engine
(_require_block / _require_block_defined) is now shared by both placing
tools: non-string name -> TypeError, unknown -> ValueError naming it,
layout block -> ValueError, all before add_blockref / InsertBlock.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Closes the four verified BLOCKING findings on pid_graph.
1. scope="all" attached across layouts: the port grid, bbox candidates,
vertex grid, junctions and text lookup were pooled from every space.
The grid is now keyed by (space, cell) and every lookup filters by the
edge's space; junctions carry `space`.
2. A mirrored INSERT (extrusion -Z, as MIRROR3D / foreign DXFs store it)
got its catalogue ports on the unmirrored image at 1.0. Both engines
report `mirrored` on INSERT properties (ezdxf: extrusion z < 0; COM:
Normal z < 0; default False); transform_port takes `mirrored` and
applies x -> -x about the WCS insertion point after rotation/scale,
direction (180 - d) mod 360 — cross-checked against Insert.matrix44.
resolve_endpoint passes it through too, so draw_line starts on the
mirror image as well.
3. The text-tag fallback searched a full circle around the box top, so a
line label or note below the symbol beat the tag above it. Candidates
must now sit at or above top - height/2 (spec §9.2 step 6), nearest
wins, and line-number texts are never equipment tags.
4. A non-uniform INSERT scale re-ran the transform with the X factor and
set `inferred` (reserved for foreign-block ports). transform_port
gains `strict=False` for the reader: point ports scale per axis
exactly; a radial port keeps min(sx, sy)·r and the node drops to 0.6
with notes ["non-uniform scale"]. Node dicts gain `y_scale`,
`mirrored` and `notes` (default []).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two verified blocking findings on pid_graph.
`_point_segment_distance` put the centre of an arc larger than a
semicircle (|bulge| > 1) on the wrong side of the chord: `copysign`
discarded the sign of `radius - sagitta`, which is exactly what carries
the centre across the chord past 180 degrees. A bulge-2 arc was tested
as its own reflection, so a line ending on its true apex dangled and one
ending on empty paper made a junction. The offset now keeps that sign
and only takes the bulge's direction from the bulge.
Foreign-block port inference tested line ends against the INSERT's
`bounding_box`, which on both engines takes the ATTRIB text with it. A
TAG lettered above a valve pushed the box past the body, so a line
ending on the body's real edge on that side was *inside* the box and
reported dangling. Both engines now report `geometry_bbox` for an
INSERT - the drawn geometry only, ATTRIB/ATTDEF excluded, in WCS, omitted
when the block draws nothing (ezdxf via `virtual_entities`, COM by
carrying each definition member's box through the INSERT's origin,
scale and rotation). The graph prefers it over `bounding_box`, counts
an end as touching when it is within tolerance of the box or inside it,
and when several foreign boxes hold the end picks the nearest insertion.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
The per-vertex `bulges` list was handed out in the entity's own frame next
to `points` that had been translated to WCS. A mirrored LWPOLYLINE
(extrusion / Normal -Z, what `entity_mirror` produces) is a reflection,
which reverses every arc's sense, so the reader tested endpoints against
the arc's mirror image: a line ending on the true apex dangled, a line
ending on empty paper made a junction, and `length` (frame-invariant)
said nothing. Both engines had it — ezdxf emitted `get_points("xyb")`
raw, COM returned `GetBulge` raw after reflecting `Coordinates`.
`ocs.wcs_bulge(extrusion, bulge)` now negates the sign for a left-handed
frame (the same rule `wcs_arc_angles` applies to an ARC's endpoints) and
both `_entity_info` paths route bulges through it whenever they translate
the points. Fenced by an end-to-end mirrored-pipe graph test, the COM
`_entity_info` fake with Normal -Z, and a boundary-level OCS test.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Two reader defects, both about trusting a derived number over the drawing.
Stale junctions: endpoints were resolved before a foreign line's membership
was decided, so a P&ID line ending on a foreign line that was then discarded
(it touched no node) kept `{"junction": "J1"}` while `junctions` was empty
and `stats.dangling` was one short. Node attachment now runs first for every
edge, the foreign lines that attach are admitted, and only then are junctions
and dangling ends resolved over the edges actually in the graph.
Chord length: `length` was a chord walk over the vertices, 12.5% short on a
semicircular crossing jump with no field saying so, and junction detection
tested the chord too, so a line ending on the arc dangled. Both engines now
report per-vertex `bulges` next to `points` (COM asks GetBulge only when
`Length` exceeds the chord walk, since an arc is always longer than its
chord); the reader takes the engine's bulge-aware `length` and tests
endpoints against the arc. The chord sum survives only for an engine that
reports no length, and is then labelled `length_approximate`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
encode_values() let strings and nan/inf through float() into 1010 point
coordinates and never finiteness-checked bare 1040 reals, so
entity_set_xdata(handle, app, [["nan", 1]]) or [float("inf")] wrote a
literal "nan"/"inf" into the DXF (and every undo snapshot) and read back
as null. Numbers now go through the same rule block_specs._scalar applies:
int/float only, bool refused, math.isfinite, error naming values[i][j].
The advertised 16 KB limit was per call per app; AutoCAD's is per object
across every application (xdroom/xdsize), so three 15 KB apps on one
entity passed headless and would fail SetXData live. check_entity_budget()
now sums the entity's existing XDATA under every other app (ACAD's DSTYLE
overrides included) plus each 1001 marker with AutoCAD's resbuf sizes,
and both engines run it before registering the APPID or writing; removal
is never refused. The result's "bytes" is that same accounting.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
`add_blockref` never checks the name and `add_auto_attribs` skips autofill
when `Insert.block()` resolves to None, so a typo'd block name returned a
handle whose attribute values were silently dropped and whose dangling
INSERT `doc.audit()` later deletes. Check `name in self._doc.blocks` and
raise `ValueError` on both the attribute and no-attribute paths, matching
the COM engine's `InsertBlock` refusal for an unknown name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FKFStjEFzpGyLq5bMpWxTd
Every one of these was reported ok/clean to the caller while being wrong.
Silently wrong numbers
- selection_filter(min_area) read `entity.dxf.get("area", 0.0)` for SOLID,
TRACE and HATCH, none of which carry that attribute, so every hatch
measured 0.0. A 1600 mm^2 hatch was excluded by min_area=1.0 while
`filtered_by` asserted the filter had run, and COM (which reads ActiveX
.Area) returned a different selection for the same call. It now answers
from the measurement `entity_measure` uses, so the two cannot disagree.
- Every headless dimension rendered through ezdxf's bare `Standard` style:
1.0 mm text with a comma decimal marker, against ISO 3098's 2.5 mm minimum
and ISO 129's point -- while the document header itself said $DIMTXT 2.5.
`ezdxf.new(setup=True)` is not the fix; measured, it renders a 100 mm
dimension as "10000". The attributes are now stored explicitly.
- Saving writes `dimrnd = 0.0` onto the Standard style, and ezdxf applies
`xround(value, dimrnd)` whenever the attribute is present at all --
`xround(33.333, 0.0)` is 33. So on any reopened file, including one this
server saved, every dimension was rounded to a whole unit before DIMDEC
formatted it: a 12.75 mm feature dimensioned 13. AutoCAD means DIMRND 0 as
*no* rounding; the sentinel is now discarded at every load site, and a real
0.5 mm rounding is left alone.
- The DIM* header fold gave out-of-range values teeth they did not have when
they died in the header: dim_decimals=-1 returned ok and then killed the
next dimension with `ValueError: Format specifier missing precision` from
inside ezdxf, and 40 printed forty digits of float noise onto the sheet.
Ranges are now AutoCAD's own (DIMDEC 0-8, DIMZIN 0-15, lengths positive).
Security
- security.py recorded the policy as "sanitize_command and sanitize_lisp each
have exactly ONE caller ... the policy is scoped to the CHANNEL". The
premise was false. `_ensure_linetype_loaded` and `ComBackend.linetype_load`
build `_-LINETYPE _LOAD {name} {file}` and hand it to SendCommand, which
treats a newline and ';' as segment separators -- so a `linetype=` argument
carrying either injected further AutoCAD commands, and the 36-verb denylist
never saw that channel. Guarded with the DXF symbol-name rule (the
injection characters fall out of it rather than being enumerated) plus
validate_path for the file argument, which was also the one path-taking
tool reaching the filesystem unchecked. The policy comment is corrected.
Gates that could not see
- drawing_critique returned zero issues on a quarantined document: all seven
checks wrapped their backend call in a bare `except Exception`. CLAUDE.md
rule 7 makes that call the gate an agent is told to trust. Only the
quarantine now escapes; an ordinary broken check still degrades.
`_check_dimension_legibility` also read `_doc` directly from the event loop
thread, missing the gate and performing exactly the unsynchronised access
the quarantine exists to prevent. `construction_clear` answered
"deleted: 0" -- there was nothing to clear -- for the same reason.
- The iso128 focus checked layer lineweights only, so a sheet lettered at
1.0 mm critiqued clean. It now reads the effective dimension height and
separator, header-then-style, in the order the renderer resolves.
- check_doc_numbers.py derived five values it never checked, and those were
the ones that had drifted. The collected-test count (README said 1274, the
tree had 1369) and the A/B pass-rate and Fixed columns are now gated.
- benchmarks/README.md's v1.4.0 table was impossible on its face -- 21
passing plus 5 fixed is 26, not 24 -- and contradicted the report it
linked, because `ab-v1.4.0-vs-v1.5.0.json` was regenerated from a tree that
already carried the dimension fixes and so never measured the v1.5.0 tag.
Replaced with a real run: ab-v1.4.0-vs-v1.5.1.json, 21/26 -> 26/26.
Release gate
- release.yml ran one ubuntu/3.11 lane, so a Windows-only defect could reach
PyPI with no Windows job having executed. That is not hypothetical: v1.5.0
shipped `except pywintypes.com_error` raising NameError wherever pywin32 is
absent. It now runs the same three lanes as ci.yml, Windows included.
1368 passed, 1 xfailed. ruff clean. Tool inventory and all 16 gated document
numbers match the tree.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
**COM discarded areas it had already read.** `entity_measure` fell back to
rebuilding geometry from `.Coordinates` when `.Area` *or* `.Length` was
missing, coupling two independent property reads. HATCH, REGION and 3DSOLID
expose `.Area` and neither of the others, so the fallback fired, found no
vertices, and raised "AutoCAD reported neither an area nor usable vertices" --
while holding the area. Those are the exact types the README sells the COM
backend on. Now only a missing `.Area` triggers the fallback; an absent
perimeter is reported as `None` with `perimeter_exact: False` instead of being
invented, which also removes a `round(None, 6)` TypeError waiting for the first
type that answers `.Area` and nothing else.
**A plain square hatch reported itself self-intersecting.** `ezdxf.path
.flattening()` repeats the start point, and `is_self_intersecting` excluded
adjacent edges *by index*, so with the duplicate present the first and last
real edges were cross-tested and registered as crossing. Measured: a 40x40
SOLID hatch came back `area: 1600.0, self_intersecting: True`. A closed loop
now answers the same whether or not it carries its closing vertex, and a real
bowtie is still caught (`area: 0.0, self_intersecting: True`).
**The bowtie warning never fired on the live backend.** `self_intersecting` was
only computed inside the COM fallback, so an LWPOLYLINE bowtie -- which has
both `.Area` and `.Length` and never reaches it -- returned `area: 0.0,
self_intersecting: null`. The confident zero this field exists to flag, going
out unflagged. It is now computed on the normal path too.
Also corrects a docstring written earlier today in `contracts/analysis.py`
claiming the live backend "asks AutoCAD for `.Area`, which has already applied
the [hatch island] style". Whether ActiveX's hatch area applies the style is
not verified against a live seat, and the method could not measure a hatch at
all. It now says so.
The ActiveX member profiles behind the COM tests are assumptions, not facts,
and the tests say so; a live seat settles them. `.Circumference` for CIRCLE and
`.Perimeter` for REGION are deliberately NOT added here -- writing more members
from the reference is what produced four wrong beliefs in v1.4/v1.5.
1267 passed, 1 xfailed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three defects found after 1.5.0 reached PyPI, two of them by the adversarial
pass over the rewritten README.
The HTTP bind guard failed open on the launch path it was written for.
`_guarded_run_async` read the bind address from the `host` kwarg and treated an
absent one as loopback. It is not: `fastmcp run` forwards that kwarg only when
`--host` was passed, and fastmcp otherwise resolves the host from
`fastmcp.settings.host`, which is environment-backed. So
FASTMCP_HOST=0.0.0.0 fastmcp run server.py:mcp --transport http
bound every interface -- 149 tools including file open/save and AutoCAD command
execution, no token -- while the guard inspected the literal "127.0.0.1" and
waved it through. v1.4.0's changelog claimed this guard "fires on every launch
path"; it fired, and looked at the wrong host. It now resolves the effective
host, and warns rather than staying silent if it cannot.
`[com]` and `[full]` could not be installed off Windows. Both listed
`pywin32>=306` with no environment marker, and pywin32 publishes Windows wheels
and no sdist, so `pip install autocad-mcp-pro[full]` died at resolution on
Linux and macOS -- and `[full]` is the extra the README recommended to
contributors. CI never caught it because every Linux lane installs `[pdf]` or
syncs from uv.lock, whose resolution markers hide the gap. Both entries carry
`; sys_platform == "win32"` now, with a release-consistency test to keep them.
`drawing_settings({"dimscale": ...})` reported success and changed nothing
headlessly. It writes `$DIMSCALE`, which is what AutoCAD reads when it draws a
dimension, so the call worked on COM; ezdxf renders from the dimstyle table
entry and never consults the header. One call, one reported success, two
different drawings. The header value now folds into the per-dimension override
on all five dimension tools -- including `dimension_aligned` and
`dimension_angular`, which do not share the tolerance-override path and the
obvious fix would have missed. DIMSCALE 1.0 writes nothing.
README: every engine-conditional family in the feature table now says which
engine (boundary tracing, WIPEOUT/REVCLOUD/MTEXT masks, CHSPACE, typed hatch
edge paths, headless undo), and the checkout install line stopped recommending
an extra that could not resolve on the reader's platform.
1257 passed, 1 xfailed. 1.5.0 is to be yanked: its diameter and radius callouts
put wrong numbers on drawings at default settings.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`add_diameter_dim` / `add_radius_dim` measure to the point they are handed;
`leader_length` is a text placement. The ezdxf backend passed
`centre + (radius + leader)` as that point, so the leader became part of the
measurement: a true 40 mm bore was dimensioned 60 at the default
`leader_length=10`, and 108 at 34. Radius callouts were `leader_length` too
large the same way.
This is the worst class of defect for this project -- a wrong number, at
default settings, on the one part of a drawing that exists to carry numbers --
and it shipped in v1.4.0 and earlier. The size now comes from `radius` and
`location` only places the text.
The live COM backend was never affected: ActiveX's AddDimDiametric takes the
two chord points and the leader length as separate arguments. The two engines
had been disagreeing by 2 x leader_length on the same call.
Found while building the drawing for the new README, whose own bore callout was
wrong. Two checks added to correctness_suite.py; both report fail -> pass
against v1.4.0, not miss -> pass, which is what separates a repaired defect
from new capability in that lane. A/B is now 21/26 -> 26/26, five fixed, zero
regressed.
README rewritten from scratch
- Hero is a real ISO A3 sheet the server drew: m6 z24 involute spur gear, DIN
6885 keyed bore, section A-A, ISO 129 dimensions, ISO 286 H7 fit, ISO 7200
title block, 56 entities, drawing_critique clean. New
scripts/render_readme_showcase.py rebuilds it, and the tool-call sequence
that produces it is printed in the page.
- Star history chart, badge row, capability matrix, five evidence lanes, and a
"what this release is bad at" section carrying the 28% throughput regression.
- Every image and repo link is now an absolute URL: README.md is the PyPI long
description, where relative paths 404.
Corrections this work forced, all measured
- The df=0 example was wrong. FILLET is already in entity_fillet's own text;
the commands that genuinely scored zero are WBLOCK, PEDIT, OVERKILL,
LAYTRANS and MATCHPROP.
- 40,305 tokens is the tools/list wire payload; ~25,143 is the part forwarded
to the model. The old wording said "of schema", which is neither.
- `--tokenizer anthropic` needs a package and credentials this repo does not
lock, and refuses rather than falling back. Said so.
- Discovery ranks over the 149-tool advertised catalog, not the 154 registered.
- Five middlewares, not four; the fifth is what makes refusals machine-readable.
- Five of the 27 capability keys are environment-dependent, so the matrix
carries footnotes instead of bare ticks.
- "Every coordinate is WCS" has one deliberate exception: TEXT rotation.
- render_live_chart's axis still said "fixed 10-task matrix" while our bar came
from v3's fifteen. Each bar now carries its own matrix.
- .env.example said MAX_UNDO_STACK=50 (code: 5) and omitted four real
variables, two of them the remote-HTTP controls.
- server.json described an empty ALLOWED_PATHS as blocking access. It disables
the allowlist.
- server.py called the lean profile ~46 tools; it is 47.
- backends/capability.py cited a test file that does not exist.
1249 passed, 1 xfailed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tool count 131 -> 154; 474 -> 1242 collected tests.
The release exists for two measured reasons. A 149-tool catalog costs a client
~40,300 tokens before it has asked for anything, and a drafter searching the way
drafters think -- FILLET, BPOLY, QSELECT, WBLOCK -- scored df=0 against the stock
index, because those words were simply not in the data.
Discovery and batching
- DISCOVERY_MODE=search replaces the catalog with search_tools + call_tool,
ranked over an AutoCAD command and synonym corpus (discovery/aliases.py) on
top of fastmcp's BM25 index. Measured: 40,305 -> 356 tokens advertised.
- cad_batch runs a step list in one round trip; fields= projects result-heavy
responses. The `core` profile is gone -- discovery replaced it.
Honesty debt (Tier 0)
- OCS/ECS: `extrusion` appeared nowhere in this codebase, so mirrored and
rotated geometry reported coordinates that were quietly wrong. backends/ocs.py
translates at the backend boundary; every tool coordinate is WCS on both
engines, and a tilted plane refuses rather than answering with a number that
looks fine.
- drawing_save_as(fmt="dwg") wrote DXF bytes to a .dwg path. drawing_audit never
repaired. analysis_measure_area shoelaced points the caller typed in.
- ezdxf calls gained a per-call timeout, so one hung call can no longer wedge a
server whose document lock is a single asyncio.Lock.
Architecture
- The 1854-line backend ABC is 19 contract modules; @capability(key, reason=)
makes optional methods declarative and a gate fails on undeclared holes.
- 8 layout/viewport tools, CHSPACE, CAD_PROGID escape hatch.
- Wave A: selection filters, boundary tracing, hatch depth, annotation objects,
measurement -- 13 tools of a planned 39. The REGION and 2D-boolean family was
cut on evidence: add_region() yields zero ACIS bytes and the greiner_hormann
substitute loses 28.2% of the area on a square with one semicircular edge.
Verified against a live AutoCAD 2026, which found four COM defects no amount of
reading would have caught -- AcadPViewport has no ViewCenter, and the line that
set it had been swallowed by a bare except since v1.4.
Benchmark v3 (15 tasks) and what it caught
- v2 scored this server 10/10, which carried no information: every task in it
exercised something the server was built around. Five tasks were added because
they can fail, and three did while being written -- a hatch could not be
measured though the refusal listed HATCH as measurable, the boundary tools and
the measure tool disagreed about the same shape (139.2177 vs 139.2699), and a
circle stored as two bulged vertices measured 0.0.
- Competitor reports are NOT re-scored. They are pinned v1.4 runs against v2 and
were never asked these five questions; the chart shows those rows `not run`.
- Correctness A/B: 21/24 -> 24/24, zero regressions.
Performance, stated plainly
The published v1.4 perf report was recorded on CPython 3.14 and the new one on
3.11.15, so the apparent 2-6x speedup is the interpreter, not this release.
Re-measured on one interpreter, v1.5.0 is 28% slower creating entities and 22%
slower on the 10k roundtrip. Fully attributed: EZDXF_CALL_TIMEOUT=0 restores
v1.4.0's exact numbers. That is the deadlock fix being paid for, the knob is
documented, and winning it back is on the 1.6 roadmap.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- TOOL_PROFILE=lean|core|full applied in the lifespan via server-level enable/disable; system_about reports the active profile; opt-in solid_* tools are hidden while ENABLE_3D=false
- layouts: layout_list/create/set_current + viewport_create (scaled model viewports) on both backends; drawing_export_pdf(layout=...); ezdxf uses TILEMODE + active-layout binding, COM switches ActiveLayout and restores it
- ISO 286: engineering/fits.py authored IT4-11 + fundamental-deviation tables (1-500 mm; shafts d..p/h/js, holes D..H/JS) with clear out-of-scope errors; dimension_linear/radius/diameter gained fit= resolved from the measured nominal
- tolerances: DIMTM now signed in deviation/limit modes so double-positive fits (p6 +0.035/+0.022) render correctly; legacy positive-magnitude contract preserved
- solids: solid_box/cylinder/extrude/revolve/boolean native on COM (AddBox/AddCylinder/AddRegion+AddExtrudedSolid/AddRevolvedSolid/Boolean); ezdxf reports the honest solid_3d capability boundary
- capability maps: paper_space native, new viewport_render feature, ENABLE_3D-gated solid_3d
- 60 new tests (profiles, layouts, viewports, layout PDF, fits, gating); version pins in tests now read version.__version__
Co-authored-by: Cursor <cursoragent@cursor.com>
Adds production-grade engineering features and tools: 2D GD&T (feature control frames + datum features) via engineering/gdt.py, ISO‑129 dimension tolerance support (engineering/tolerances.py) and an ezdxf/COM plumbing for toleranced dims, a scalar drawing score + invalidity ratio (engineering/scoring.py) wired into drawing_finalize, in-place entity editors (entity_edit_text/entity_edit_geometry), and a friendly drawing_settings facade. Includes server tool wiring, COM/ezdxf backend implementations, datum-consistency critique, many unit tests, README/CLAUDE/CHANGELOG updates, and a version bump to 1.2.0. Also corrects COM backend capability label (entities_2d).
New COM-only Entity Query tool that reads AutoCAD's implied ("pickfirst")
selection set and returns the selected entity handles + EntityInfo, so the AI
can scope work (e.g. dimension_auto) to exactly what the user picked in the
viewport instead of the whole drawing. Resolves#1 — the layer-juggling
workaround is no longer needed.
- backends/base.py: abstract selection_get() returning a status dict
- backends/com_backend.py: reads ActiveDocument.PickfirstSelectionSet, surfaces
the PICKFIRST sysvar, handles the empty-selection case
- backends/ezdxf_backend.py: headless stub (ok=False, empty handles, same shape)
- server.py: @mcp.tool registration (readOnlyHint), SECTION 5 3 -> 4 tools
- README + CHANGELOG + pyproject: 110 -> 111 tools, v1.1.0 -> v1.1.1
Verified live on AutoCAD 2027 (COM): selection_get correctly returned the
user's grip selection across two distinct picks; 318 tests pass, ruff-clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Audit-driven fixes across the dual backend, the premium workflow, and the
engineering layer. 318 tests, ruff-clean.
Quality gate (the moat):
- drawing_finalize now runs the premium ISO-128 critique in addition to the
8-step validator; leftover construction, non-ISO lineweights, untrimmed
corners, duplicates and dim overlap block the gate (strict_critique fails on
warnings too).
- dim_overlap critique no longer a no-op (dim reference point + bbox fallback);
dim/construction layers resolve from the active layer set (iso13567 too).
Stability / correctness:
- view_screenshot & drawing_export_pdf render headless via Agg (no more
worker-thread SIGSEGV).
- gear tooth profile no longer self-overlaps at high tooth counts; section view
no longer duplicates bore lines; validator keyway heuristic fixed.
- ezdxf aligned/angular dim API, full-circle polar array duplicate already
covered by Sprint 1; this bundle adds save-format-from-extension,
entity_offset side selection, ARC length, properties parity (bounding_box /
rotation / char_height), mtext rotation.
COM robustness (mocked-COM tested):
- CoUninitialize on teardown; transaction commit/rollback try/finally + UNDO via
the CMDACTIVE guard; system_run_lisp guard + USERS1 value capture;
set_variable type coercion; HWND via Application.HWND; BlockInfo.description.
Security:
- HTTP remote-bind guard fires on every launch path (incl. `fastmcp run`);
StaticTokenVerifier wired into FastMCP; AutoLISP allowlist bypass-vector tests.
Hygiene: linetype-on-demand in _apply_attrs, honest view_zoom returns, snap-on-arc
sweep handling, point_tangent acos clamp, dynamic tool_groups / tool count,
word-boundary SPUR/HELICAL, undo-stack locking.
Deferred: R22 (undo/transaction stack isolation) lands with the I1 refiner (1.2),
which depends on it.
Three production-blocking defects + two legal/infra gaps from the recon pass.
R1 (CRITICAL): the 8 premium meta-tools (drawing_plan, drawing_critique,
point_from_snap, construction_xline, construction_clear, drawing_apply_iso_layers,
dimension_auto, entity_select_smart) raised NotImplementedError on the COM
backend — i.e. the entire "non-negotiable" premium workflow crashed on the
DEFAULT Windows backend. Lifted all eight to AutoCADBackend as concrete,
backend-agnostic implementations built on the shared abstract primitives +
the identical EntityInfo.properties contract, so both backends inherit them.
The only backend-specific piece left is the new `_create_xline` primitive
(XLINE has no cross-backend entity_create_* equivalent). Removes ~285 lines of
ezdxf-only duplication; the existing meta-tool test suite now covers shared code.
R2 (CRITICAL): layer_create/layer_modify/entity_set_properties used
int(lineweight), truncating every millimetre lineweight (0.50, 0.25, 0.18, 0.13)
to 0 — silently wiping the whole ISO 128 discipline, because engineering/layers.py
passes mm-floats while the MCP boundary passes hundredths-ints. Added
normalize_lineweight() to reconcile both conventions to ezdxf/COM hundredths and
wired it into all six call sites.
R3 (HIGH): _check_iso128 was a permanent no-op (everything was 0 from R2, so the
`lw <= 0: continue` guard skipped all layers). Fixed by R2; additionally exclude
CONSTRUCTION-class layers (intentionally sub-ISO 0.05mm scratch weight) to avoid
a new false positive, and corrected the misleading "normalises to mm" comment.
Also: add MIT LICENSE (referenced by CLAUDE.md but missing — legal gap) and
restore .github/workflows/ci.yml (lint kept non-blocking until the repo-wide
ruff cleanup; the test job is the real gate).
Verified: 182 passed / 2 xfailed; functional check confirms lineweights now
store as hundredths (GEOMETRY=50) and the ISO critique correctly flags a 0.40mm
layer while passing a clean ISO drawing.
Introduce the autocad-mcp-premium skill with workflow docs, examples, and references (.claude/skills/autocad-mcp-premium/*). Add PlanSpec/critique plumbing and engineering helpers (engineering/plan_spec.py, engineering/critique.py) plus tests and a smoke script. Extend backend API (backends/base.py) with corner operations and premium meta-tools (trim/extend/fillet/chamfer, drawing_plan, drawing_critique, point_from_snap, construction_xline/clear, drawing_apply_iso_layers, dimension_auto, entity_select_smart) and implement COM backend corner ops (backends/com_backend.py) with placeholders for meta-tools. Update CLAUDE.md to document the premium drawing rules and standard workflow. Misc: add examples, references, and tests for premium features, and minor server/backend adjustments.
Introduces an engineering/ package that lets MCP clients produce production-
quality technical drawings without LLM-improvised geometry. Adds 7 new MCP
tools, an 8-step pre-completion validator, and an automatic linetype + layer
bootstrap on drawing_new so CENTER/HIDDEN/PHANTOM and standard mechanical
layers (GEOMETRY, DIM, HATCH, TEXT, TITLEBLOCK, ...) are always available.
- engineering/gear.py: pure-Python involute math, 40+ points/flank, helical
+ spur front views, deterministic section A-A (no helix lines in section).
- engineering/keyway.py: DIN 6885 keyway table + parametric keyed bore /
side-section drawers.
- engineering/titleblock.py: ISO 7200 A3 (420x297 mm) title block; title
text is written verbatim to the title cell.
- engineering/validator.py: DrawingValidator with 8 checks (real DIMENSION
entities, no hidden orphans, linetypes loaded, bore + keyway in both
views when expected, title consistency e.g. forbid 'HELICAL SPUR GEAR'
when helix_angle truthy, saved-to-disk + file-on-disk, screenshot
exported, dwg path returned).
- backends/ezdxf_backend.py: AutoCAD-only linetype fallback (HIDDEN,
BORDER families) so ezdxf doc gets correct patterns when linetype_load
is called for names ezdxf.tools.standards does not ship.
- backends/base.py: concrete helpers set_layer_active / ensure_linetypes.
- server.py: Section 12 with 7 engineering tools, drawing_new(bootstrap=
True), and an ENGINEERING WORKFLOW block in the MCP instructions string.
- 30 new tests covering gear math, DIN6885 lookup, ISO A3 layout, title
verbatim, and every validator check. Tool count 89 -> 96.
